Abstract:We study the problem of drag reduction (DR) in a lubricated conduit, in which a thin layer of low-viscosity (e.g., water) fluid is injected in the near-wall region and facilitates the transport of a core of high-viscosity fluid (e.g., oil). In the present investigation, the flow instance is a channel flow, and consequently we have one thin layer of low-viscosity fluid lubricating each wall. We run direct numerical simulations of this flow instance, respecting the protocol of the constant power input approach. This approach prescribes that the flow rate is adjusted according to current pressure gradient, so to keep constant the power injected into the flow, it mimics closely real transport pipelines. A phase-field method is used to describe the dynamics of the liquid-liquid interface. As this technique is tailored toward the transport of very viscous fluids like oils, we study the drag reduction performance of the system by keeping fixed the lubricating fluid properties (e.g., water) and by considering two different types of oil characterized by different viscosities, 10 and 100 times more viscous than water, respectively. As in real instances the presence of impurities and surfactants—which act by locally reducing the local value of the surface tension—is inevitable, we consider, for each type of transported oil, a clean and a surfactant-laden interface. For all four tested configurations, we unambiguously show that significant DR can be achieved. Reportedly, compared to the single-phase case, we observe a reduction of the mean pressure gradient down to px/px,sp=0.25 for the largest viscosity oil. By analyzing the features of turbulence in the lubricating layer, and the close interaction with the perturbations induced by the oil-water interface deformation, we elucidate the physical mechanisms leading to DR and we underline the effects of viscosity ratios and of surfactants. https://doi.org/10.1103/PhysRevFluids.9.054611 ©2024 American Physical Society

Investigation on Drag Reduction of Aqueous Foam for Transporting Thermally Produced High Viscosity Oil

Facilitating the Transportation of Highly Viscous Oil by Aqueous Foam Injection

A Comparison of Numerical Simulations with Experimental and Theoretical Investigations of Highly-Viscous Oil-Aqueous Foam Horizontal Flow

Experimental Study on Drag Reduction of Aqueous Foam on Heavy Oil Flow Boundary Layer in an Upward Vertical Pipe

Investigation on Drag Characteristics of Heavy Oil Flowing Through Horizontal Pipe under the Action of Aqueous Foam

Pipeline Transport of Heavy Crudes As Stable Foamy Oil

Preparation and rheological properties of a stable aqueous foam system

Study on the Flow Characteristics of Heavy Oil-Water Two-Phase Flow in the Horizontal Pipeline

Optimization Principle for Variable Viscosity Fluid Flow and Its Application to Heavy Oil Flow Drag Reduction

An Oil-Tolerant and Salt-Resistant Aqueous Foam System for Heavy Oil Transportation

Investigation on Flow Patterns and Pressure Drops of Highly Viscous Crude Oil–water Flows in a Horizontal Pipe

Experimental Study on Highly Viscous Oil-Water Annular Flow in a Horizontal Pipe with 90° Elbow

Turbulent drag reduction in water-lubricated channel flow of highly viscous oil

Experimental research on drag reduction by polymer additives in a turbulent pipe flow

Drag Reduction Related to Boundary Layer Control in Transportation of Heavy Crude Oil by Pipeline: A Review

Study on the Hydrodynamic Performance and Stability Characteristics of Oil-Water Annular Flow Through a 90° Elbow Pipe

Gas-liquid surface characterization and liquid film thinning of Non-Aqueous foam

STUDY ON DRAG REDUCTION PROPERTY OF FLOW IMPROVERS FOR SUPER-VISCOUS CRUDE OIL

Experimental study of viscous oil-water core-annular flow in horizontal pipe

Preparation and Performance Evaluation of Stable Foamy Heavy Oil

Water mixed transportation of heavy oil in low-temperature environments