Abstract:Medium-entropy alloys (MEAs) typically exhibit outstanding mechanical properties, but their high Young's modulus results in restricted clinical applications. Mismatched Young's modulus between implant materials and human bones can lead to "stress shielding" effects, leading to implant failure. In contrast, β-Ti alloys demonstrate a lower Young's modulus compared to MEAs, albeit with lower strength. In the present study, based on the bimodal grain size distribution (BGSD) strategy, a series of high-performance TiZrNbTa/Ti composites are obtained by combining TiZrNbTa MEA powders with nano-scale grain sizes and commercially pure Ti (CP-Ti) powders with micro-scale grain sizes. Concurrently, Zr, Nb, and Ta that are β-Ti stabilizer elements diffuse into Ti, inducing an isomorphous transformation in Ti from the high Young's modulus α-Ti phase to the low Young's modulus β-Ti phase at room temperature, optimizing the mechanical biocompatibility. The TiZrNbTa/β-Ti composite demonstrates a yield strength of 1490 ± 83 MPa, ductility of 20.7 % ± 2.9 %, and Young's modulus of 87.6 ± 1.6 GPa. Notably, the yield strength of the TiZrNbTa/β-Ti composite surpasses that of sintered CP-Ti by 2.6-fold, and its ductility outperforms TiZrNbTa MEA by 2.3-fold. The Young's modulus of the TiZrNbTa/β-Ti composite is reduced by 28 % and 36 % compared to sintered CP-Ti and TiZrNbTa MEA, respectively. Additionally, it demonstrates superior biocompatibility compared to CP-Ti plate, sintered CP-Ti, and TiZrNbTa MEA. With a good combination of mechanical properties and biocompatibility, the TiZrNbTa/β-Ti composite exhibits significant potential for clinical applications as metallic biomaterials. STATEMENT OF SIGNIFICANCE: This work combines TiZrNbTa MEA with nano-grains and commercially pure Ti with micro-grains to fabricate a TiZrNbTa/β-Ti composite with bimodal grain-size, which achieves a yield strength of 1490 ± 83 MPa and a ductility of 20.7 % ± 2.9 %. Adhering to the ISO 10993-5 standard, the TiZrNbTa/β-Ti composite qualifies as a non-cytotoxic material, achieving a Class 0 cytotoxicity rating and demonstrating outstanding biocompatibility akin to commercially pure Ti. Drawing on element diffusion, Zr, Nb, and Ta serve not only as solvent atoms to achieve solid-solution strengthening but also as stabilizers for the transformation of the β-Ti crystal structure. This work offers a novel avenue for designing advanced biomedical Ti alloys with elevated strength and plasticity alongside a reduced Young's modulus.

Phase-tunable equiatomic and non-equiatomic Ti-Zr-Nb-Ta high-entropy alloys with ultrahigh strength for metallic biomaterials

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Dual Phase Equal-Atomic NbTaTiZr High-Entropy Alloy with Ultra-Fine Grain and Excellent Mechanical Properties Fabricated by Spark Plasma Sintering

Development of non-equiatomic Bio-HEAs based on TiZrNbTa-(Mo and Mn)

Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials

An Ultra‐Low Modulus of Ductile TiZrHfTa Biomedical High‐Entropy Alloys through Deformation Induced Martensitic Transformation/Twinning/Amorphization

Design and Fabrication of a 5Ti5Zr5Nb1Sn High‐Entropy Alloy as Metallic Biomedical Material

Design and properties of novel Ti–Zr–Hf–Nb–Ta high-entropy alloys for biomedical applications

Microstructure Evolution and Deformation Mechanism of Α+β Dual-Phase Ti-xNb-yTa-2Zr Alloys with High Performance

New TiTaNbZrMo high-entropy alloys for metallic biomaterials

Development of an equiatomic octonary TiNbTaZrMoHfWCr super-high-entropy alloy for biomedical applications

Bimodal grain size structure design to optimize the mechanical properties of TiZrNbTa high entropy alloys/Ti composites

Metastable dual-phase Ti–Nb–Sn–Zr and Ti–Nb–Sn–Fe alloys with high strength-to-modulus ratio

Microstructure and Properties of Non-Equiatomic Ni10Cr6WFe9TiAlx High-Entropy Alloys Combined with High Strength and Toughness

Revealing the mechanical behavior of Ti48-xZrxHf26Nb26 high-entropy alloy through zirconium content variations

Microstructure and Mechanical Properties of Biomedical Ti-Zr-Nb-Ta-Sn High-Entropy Alloys

Optimizing the cell compatibility and mechanical properties in TiZrNbTa medium-entropy alloy/β-Ti composites through phase transformation

Revealing the Mechanical Behavior of Ti Zr Hf Nb High-Entropy Alloy Through Zirconium Content Variations

Novel Metastable Engineering in Single-Phase High-Entropy Alloy

Microstructure and mechanical properties of Ti–Nb–Fe–Zr alloys with high strength and low elastic modulus

Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility