Effect of Aging Temperature on Microstructure and Mechanical Properties of a Novel Ti-6121 Alloy
Jianwei Chen,Le Wang,Qunbo Fan,Zhuoyue Sang,Yao Xu,Changhao Wang,Jiahao Yao,Zhiming Zhou,Liu Yang,Zheng Liu,Jinliang Gao,Heyong Feng
DOI: https://doi.org/10.1016/j.jallcom.2023.169612
IF: 6.2
2023-01-01
Journal of Alloys and Compounds
Abstract:The effect of heat treatment on the microstructure and mechanical properties of a novel alpha + beta Ti-6.2Al-0.8V-2.25Mo-1.2Cr-0.5Si (wt%) alloy was investigated in this paper. Microstructure and crystalline structure of the alloys after different solution and aging treatments were identified by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results indicated that a multi-scale microstructure was possessed in the heat-treated samples, which was composed of equiaxed primary alpha (alpha p) phase and nano-scale acicular secondary alpha (alpha s). After 900 degrees C solution for 1 h and 550 degrees C aging for 6 h, the alloy exhibited the optimal combination of strength and ductility (the ultimate tensile strength of similar to 1387 MPa, the elongation of similar to 11 %). Furthermore, the combination mechanism of strength-ductility of the sample under this condition was investigated. The samples before and after tensile fracture were analyzed using transmission electron microscope (TEM) and electron back-scattered diffraction (EBSD). The results showed that a large propor-tion of nano-scale acicular alpha s phases precipitated from the beta matrix can effectively prevent the slip of dislocations and enhance the strength of the alloy. In addition, the multi-scale microstructure can create the strain partition, which can mediate the strain incompatibility between the alpha p and the transformed beta (beta T) to obtain an excellent combination of strength and ductility.(c) 2023 Elsevier B.V. All rights reserved.