Abstract:Treatment of highly contaminated wastewaters containing refractory or toxic organic contaminants (e.g. industrial wastewaters) is becoming a global challenge. Most technologies focus on efficient degradation of organic contaminants. Here we improve the cathode/FeIII/peroxydisulfate (PDS) technology by turning down the current density and develop an innovative mechanism for organic contaminants abatement, namely polymerization rather than degradation, which allows simultaneous contaminants removal and resource recovery from wastewater. This polymerization leads to organic-particles (suspended solid organic-polymers) formation in bulk solution, which is demonstrated by eight kinds of representative organic contaminants. Taking phenol as a representative, 83% of PDS is saved compared to degradation process, with 87.2% of DOC removal. The formed suspended solid organic-polymers occupy 59.2% of COD of the original organics in solution, and can be easily separated from aqueous solution by sedimentation or filtration. The separated organic-polymers are a series of polymers coupled by phenolic monomers, as confirmed by FTIR and ESI-MS analyzes. The energy contained in the recovered organic polymers (4.76 × 10-5 kWh for 100 mL of 1 mM phenol solution in this study) can fully compensate the consumed electrical energy (2.8 × 10-5 kWh) in the treatment process. A representative polymerization model for this process is established, in which the SO4•- and HO• generated from PDS activation initiate the polymerization and improve the polymerization degree by the production of oligomer intermediates. A practical coking wastewater treatment is carried out to verify the research results and get positive feedback, with 56.0% of DOC abatement and the suspended solid organic-polymers accounts for 42.5% of the total COD in the raw wastewater. The energy consumption (47 kWh/kg COD, including electricity and PDS cost) is lower than the values in previous reports. This study provides a novel method for industrial wastewater treatment based on polymerization mechanism, which is expected to recover resources while removing pollutants with low consumption.

Electro-peroxone with Solid Polymer Electrolytes: A Novel System for Degradation of Plasticizers in Natural Effluents.

A Sustainable Electrochemical Strategy Utilizing Pulsed Alternating Current and Dual Carbon Felt Electrodes for Enhanced Degradation of Organic Pollutants: Oxidation Performance and Mechanisms

Degradation of pyrazole wastewater by electro-peroxone with fluidized N-doped electrodes: Dual-zone synergistic catalytic reaction

E-peroxone with a novel GDE decorated with hydrophobic membrane for the degradation of pyridine: Stability, byproducts and toxicity

Advanced degradation of refractory organic compounds in electroplating wastewater by an in-situ electro-catalytic biological coupling reactor: Removal performance, microbial community and possible mechanism

Contact-Electro-Catalysis for the Degradation of Pentachlorophenol Using Inert Fluorinated Ethylene Propylene Powders

Pulsed versus direct current electrochemical co-catalytic peroxymonosulfate-based system: Elevated degradation and energy efficiency with enhanced oxidation mechanisms

The Electro-Peroxone Process for the Abatement of Emerging Contaminants: Mechanisms, Recent Advances, and Prospects

Enhanced degradation of micropollutants using In situ electrogenerated sulfate radical at high flux

Enhanced degradation of residual potassium ethyl xanthate in mineral separation wastewater by dielectric barrier discharge plasma and peroxymonosulfate

Intensive investigation of the synergistic effects between electrocatalysis and peroxymonosulfate activation for efficient organic elimination

Electrochemical oxidation of perfluorinated compounds in water

A Highly Synergistic Dual-Cathode Electro-Fenton Process with Self-Regulation of pH and Coating Stability for the Effective Degradation of Refractory Pollutants

Sequential anodic oxidation and cathodic electro-Fenton in the Janus electrified membrane for reagent-free degradation of pollutants

Efficient degradation of propranolol with electrochemically activated peracetic acid process: Mechanisms, degradation pathway, and toxicity evaluation

Treatment of contaminants by a cathode/FeIII/peroxydisulfate process: Formation of suspended solid organic-polymers

Chlorophenolic Compounds Degradation Based on Electrolyte-Free Electrochemical Cells

Rapidly self-propelled microreactor for effective degradation of phenolic pollutions

Peroxymonosulfate activation by low-cost modified rubber during contact electrification for antibiotics efficient degradation at circumneutral pH: Mechanism and toxicity assessment

Peroxymonosulfate-based Electrochemical Advanced Oxidation for Pollutant Degradation: Roles of Co-phase Regulation and Electro-Induced Polarized Particle Electrodes

Cobalt etched graphite felt electrode for enhanced removal of organic pollutant in aqueous solution with a solid polymer electrolyte