Abstract:Dual permanent magnet (PM) machines synthesize two PM excitations together and potentially exhibit higher torque density than conventional single-PM excited machines. In dual-PM excited machines, the existence of one PM excitation tends to cause interior flux density reduction and irreversible demagnetization of the other PM set, and this feature is recognized as cross-coupling demagnetization. Therefore, this article systematically analyzed the mechanism and influence of this unique phenomenon in a dual-PM prototype machine. The results reveal that the cross-coupling demagnetization can result in up to 18% torque reduction under a severe working conditions if the machine is not properly designed. Increasing one set of PM thickness along the magnetization direction is beneficial to enhance the self-demagnetization withstanding ability, whereas the cross-coupling demagnetization on the other PM set has deteriorated. In order to eliminate such a side effect, some techniques, e.g., removing the demagnetization region and alleviating the mutual flux path, are presented to suppress the demagnetization. It is revealed that the demagnetization rate can be reduced to less than 3% with proper design. Finally, a dual-PM prototype is manufactured and tested to validate the improvement of demagnetization withstanding capability by using the presented suppression technique.

Experimental Study on Characteristics Variation of Permanent Magnets for High-speed Machine Applications

Effect of Magnet Thickness on Electromagnetic Performance of High Speed Permanent Magnet Machines

Comparison Between Dual-Armature Linear Switched Flux Permanent Magnet Machine and Linear Surface-Mounted Permanent Magnet Machine Considering Thermal Conditions

Analysis and Suppression of Cross-Coupling Demagnetization in Dual Permanent Magnet Machine for Direct-Drive Application

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

High-speed Permanent Magnet Electrical Machines — Applications, Key Issues and Challenges

Electromagnetic Performance Analysis of Novel Flux-Regulatable Permanent Magnet Machines for Wide Constant-Power Speed Range Operation

Multiphysics Comparative Study of High Speed PM Machines for Ring PM Rotor and Solid PM Rotor

Study of Effect of Magnet Clearance Fit on High-speed Interior Permanent Magnet Synchronous Motor

Study on Effect of Permanent Magnet Remanence on High Speed Permanent Magnet Assisted Synchronous Reluctance Machines

Design and Experimental Study of Permanent Magnet Machines with Magnetic Field Modulation

Multi-field Coupling Finite-Element Analysis of the Temperature Rise in Permanent Magnet Synchronous Motor Applied for High Speed Train

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Comparative Study of Surface-Mounted and Interior Permanent-Magnet Motors for High-Speed Applications

Analysis on Characteristics of a Permanent Magnet Linear Synchronous Motor for High Speed MagLev by Finite Element Method

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Performance Assessment of High-speed Flux-switching Permanent Magnet Machine Using Ferrite and Rare Earth Permanent Magnet Materials

Comparison and research on load characteristics of PM in different permanent magnet synchronous machines

Analysis of the Relation Between Electro-Magnetic Parameters and Permanent Magnet Machine Structure