Abstract:BackgroundAn induction motor is at the heart of every rotating machine and hence it is a very vital component. Almost in every industry, around 90% of the machines apply an induction motor as a prime mover. It is a very important driving unit of the machine. Hence, it is necessary to monitor its condition to avoid any catastrophic failure and stoppage of production. The breakdown of the induction motor would not be affordable due to remarkable financial loss, unpredicted shutdown, and the associated repair cost.PurposeVibration is a manifestation of induction motor due to the issues in alignment, balancing, and clearances. Bearing, the most vulnerable to failure due to continuous working under fatigue loading leads to defects. These defects cause changes in the vibration signature over time. The vibration monitoring techniques helps to effectively diagnose mechanical faults such as bearing defect and stator rotor rub. The purpose of this review paper is to summarize the major faults in induction motor, recent diagnostics methods augmented with advanced signal processing techniques, and real-life applications in electric vehicles. It also discusses possible research gaps and opportunities to contribute based on the review findings in the field of condition monitoring.MethodsThis article presents a detailed review of recent trends in the research of condition monitoring and fault diagnosis of the induction motor. The emphasis is given on the major faults in the induction motor covering time-domain, frequency-domain, and time–frequency domain methods along with an application of artificial intelligence techniques for fault detection.Review FactorThis article presents a comprehensive review of literature which highlights the development and new propositions by researchers in the field of diagnostic techniques for the different faults of induction motor in the last decade. Researchers documented applications of the different conventional methods, advanced signal processing techniques, and soft computing techniques for fault identification of induction motor. This review is carried out for fault identification of induction motor used in machines in general and in particular for identifying the faults in an induction motor of an electric vehicle. A dedicated discussion on the review findings, research gaps, future trends in the field of condition monitoring of induction motor is presented. Condition monitoring of the induction motor in an electric vehicle is also discussed in this paper.ConclusionsIt is observed that the vibration-based techniques are reported to be effective for the identification of mechanical faults while motor current signature analysis is effective for electrical fault in an induction motor. The review presented to analyze the suitability of various condition monitoring techniques for the induction motor fault identification in general and particularly its application in an electric vehicle. It is observed that the diagnosis of faults at the incipient level without using the signal processing technique is challenging. Fault diagnosis of induction motor has witnessed the changes from traditional diagnosis techniques to advanced techniques with a hybrid application of signal processing and artificial intelligence techniques. Still, there is a potential of improvement in reliability, efficiency, robustness, computational time, and real-time diagnostics of faults in IM.

Fault Diagnosis of Induction Machine for Rotor Cage Damage Using MCSA for Industrial Application

Research on the Effect of Rotor Broken Bar Position on Induction Machine

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

A Current Product Signal Analysis Method For Rotor Fault Diagnosis In Induction Motors

Analytical Approach for Locating Induction Motor Current Harmonics in Healthy and Different Fault Conditions

Simulation and Analysis of Squirrel Cage Induction Machines under Rotor Internal Faults

Reliable Airgap Search Coil Based Detection of Induction Motor Rotor Faults Under False Negative Motor Current Signature Analysis Indications

Support Vector Machine Used To Diagnose The Fault Of Rotor Broken Bars Of Induction Motors

Multiscale Park's Vector Approach for Identifying Early Stator Fault Severity Using MCSA in DFIGs

Stator Inter-Turn Fault Diagnosis by Motor Current Signature Approach

Study on fault diagnosis of broken rotor bars in squirrel cage induction motors: a multi‐agent system approach using intelligent classifiers

Condition Monitoring and Fault Diagnosis of Induction Motor

Rotor Faults Diagnosis for Induction Motors Considering Effects of the Load and Inertia

Fault Diagnosis on Induction Motor using Machine Learning and Signal Processing

Stator inter-turn fault detection for the converter-fed induction motor based on the adjacent-current phase-shift

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

Fault Analysis And Predictive Maintenance Of Induction Motor Using Machine Learning

Improved Slight Fault Diagnosis Strategy for Induction Motor Considering Even and Triple Harmonics

State-of-the-Art Techniques for Fault Diagnosis in Electrical Machines: Advancements and Future Directions

MCSA-based Fault Diagnosis Technology for Motor Drivetrains

Short-Circuit Fault Diagnosis on the Windings of Three-Phase Induction Motors through Phasor Analysis and Fuzzy Logic