Abstract:The effects of adhesive thickness, adhesive type and scarf angle, which are determined as the main control parameters by the dimensional analysis, on the mechanical properties of a scarf adhesive joint (Si) subjected to uniaxial tensile loading are examined using a mixed-mode cohesive zone model (CZM) with a bilinear shape to govern the interface separation. Particularly, the adhesive-dependence of the vital cohesive parameters of CZM, which mainly include initial stiffness, total fracture energy and separation strength, is introduced emphatically. The numerical results demonstrate that the ultimate tensile loading increases as the adhesive thickness decreases. Cross the ultimate tension, the joint loses the load-bearing capacity when adopting the brittle adhesive but sustains partial load-bearing capacity while selecting the ductile adhesive. In addition, for the joint with the ductile adhesive, the maximum applied displacement until the complete failure of it is directly proportional to the adhesive thickness, which is different from the case using the brittle adhesive. Taking the combination of the ultimate loading and applied displacement into account, failure energy is employed to evaluate the joint performances. The results show that the failure energy of the joint with the brittle adhesive increases as the adhesive thickness decreases. Conversely, the situation of the joint using the ductile adhesive is vice versa. Moreover, the effect of the adhesive thickness becomes more noticeable with decreasing the scarf angle owing to the variation of the proportion of each component of the mixed-mode. Furthermore, all the characteristic parameters (the ultimate tensile loading, the maximum applied displacement and the failure energy) that adopted to describe the performances of SJ increase as the scarf angle decreases. Finally, the numerical method employed in this study is validated by comparing with existing experimental results. (C) 2013 Elsevier Ltd. All rights reserved.

Trans-scale Characterization of the Thickness-Dependent Interfacial Strength of Adhesively Bonded Cylindrical Scarf Joints

Effect of Adhesive Thickness, Adhesive Type and Scarf Angle on the Mechanical Properties of Scarf Adhesive Joints

Analysis on Failure Mechanism of Scarf Joints with Brittle-Ductile Adhesives Subjected to Uniaxial Tensile Loads

Experimental and Numerical Study of Adhesively Bonded CFRP Scarf-Lap Joints Subjected to Tensile Loads

A Size-Dependent Model for Predicting the Mechanical Behaviors of Adhesively Bonded Layered Structures Based on Strain Gradient Elasticity

Experimental and Numerical Studies on the Failure Mechanism of the Composite Scarf Joints with Bonding Flaws

Mechanics of Molecular Bond Clusters Between Elastic Media: Stochastic-Elastic Coupling in Cell-Matrix Adhesion

Numerical Analysis of Effects of Adhesive Type and Geometry on Mixed-Mode Failure of Adhesive Joint

Achieving Ultrastrong Adhesion of Soft Materials by Discretized Stress Dispersion

Adhesive damage and defect analysis of scarf-repaired composite by combining extended finite element method and cohesive zone model

Bulk and Interfacial Contributions to the Debonding Mechanisms of Soft Adhesives: Extension to Large Strains

Numerical analysis on load-bearing capacity and damage of double scarf adhesive joints subjected to combined loadings of tension and bending

Study on the Mechanical Behavior of Adhesive Interface by Digital Image Correlation

Viscoelastic Adhesive Interfacial Model and Experimental Characterization for Interfacial Parameters

On the Effect of Adhesive Thickness on Mode I Fracture Energy - an Experimental and Modelling Study Using a Trapezoidal Cohesive Zone Model

ISSF Method to Evaluate Adhesive Strength when Two Distinct Singular Stress Fields Appear along the Interface

Scaling Effect of Dry Adhesion for Microfibrils and Transition Size to Flaw Insensitivity

Investigation on the interfacial adhesion of a cylindrical fibrillar on a substrate under the coupling effect of tension and torque

Experimental study of adhesively bonded CFRP joints subjected to tensile loads

Interfacial debonding in a thin plate bonded to a rigid substrate with a circular hole

Study of Tensile Failure Mechanisms in Scarf Repaired CFRP Laminates