Abstract:A high-power linearly-polarized all-fiber single-frequency amplifier at 1 µm based on tandem core-pumping is demonstrated by using a large-mode-area Ytterbium-doped fiber with a core diameter of 20 µm, which nicely balances the stimulated Brillouin scattering effect, thermal load, and output beam quality. A maximum output power of more than 250 W with a corresponding slope efficiency of >85% is achieved at the operating wavelength of 1064 nm without being constrained by the saturation and nonlinear effects. Meanwhile, a comparable amplification performance is realized with a lower injection signal power of the wavelength near the peak gain of the Yb-doped fiber. The polarization extinction ratio and the M2 factor of the amplifier are respectively measured to be >17 dB and 1.15 under the maximal output power. In addition, by virtue of the single-mode 1018 nm pump laser, the intensity noise of the amplifier under maximal output power is measured to be comparable to that of the single-frequency seed laser at frequencies higher than 2 kHz, except for the emergence of parasitic peaks that can be eliminated by optimizing the driving electronics of the pump lasers, while the deterioration of the amplification process to the frequency noise and linewidth of the laser is negligible. To the best of our knowledge, this is the highest output power of a single-frequency all-fiber amplifier based on the core-pumping scheme.

Single-polarization Single-Frequency Brillouin Fiber Laser Emits Near 5-W Power at 1 Μm

High Power and High Efficiency Single-Frequency 1030 Nm DFB Fiber Laser

More Than 20 W, High Signal-to-Noise Ratio Single-Frequency All-Polarization-Maintaining Hybrid Brillouin/Ytterbium Fiber Laser

High-power, High Signal-to-noise Ratio Single-Frequency 1 Μm Brillouin All-Fiber Laser

Low-threshold 1150 Nm Single-Polarization Single-Frequency Yb-doped DFB Fiber Laser

550 W single frequency fiber amplifiers emitting at 1030 nm based on a tapered Yb-doped fiber

Low Noise Single-Frequency Single-Polarization Ytterbium-Doped Phosphate Fiber Laser at 1083 Nm

Single Frequency High-Peak-power Fiber Laser by Suppression of SBS

A High-Power Narrow-Linewidth 1018 Nm Fiber Laser Based on a Single-Mode–few-mode–single-mode Structure

414 W Near-Diffraction-limited All-Fiberized Single-Frequency Polarization-Maintained Fiber Amplifier.

All-fiber, Narrow Linewidth and Linearly Polarized Fiber Laser in a Single-Mode-multimode-single-mode Cavity.

A 102 W High-Power Linearly-Polarized All-Fiber Single-Frequency Laser at 1560 Nm

Low-noise, Single-Frequency, Single-Polarization Brillouin/erbium Fiber Laser

Single-polarization Single-Frequency DFB Fiber Laser with Transverse Mode Switchable Output

1150-Nm Yb-Doped Fiber Laser Pumped Directly by Laser-Diode with an Output Power of 52 W

Compact Frequency-Modulation Q-switched Single-Frequency Fiber Laser at 1083 Nm

Monolithic High-Average-power Linearly Polarized Nanosecond Pulsed Fiber Laser with Near-Diffraction-limited Beam Quality

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

5Kw High Peak Power, 0.2mj High Pulse Energy, Linearly-Polarized Pulsed Laser from a Single All-Fiber Oscillator

Over 250 W Low Noise Core-Pumped Single-Frequency All-Fiber Amplifier