Abstract:Electrolytes are widely considered as a key component in Li–O2 batteries (LOBs) because they greatly affects the discharge-charge reaction kinetics and reversibility. Herein, we report that 1,3-dimethyl-2-imidazolidinone (DMI) is an excellent electrolyte solvent for LOBs. Comparing with conventional ether and sulfone based electrolytes, it has higher Li2O2 and Li2CO3 solubility, which on the one hand depresses cathode passivation during discharge, and on the other hand promotes the liquid-phase redox shuttling during charge, and consequently lowers the overpotential and improves the cyclability of the battery. However, despite the many advantages at the cathode side, DMI is not stable with bare Li anode. Thus, we have developed a pretreatment method to grow a protective artificial solid-state electrolyte interface (SEI) to prevent the unfavorable side-reactions on Li. The SEI film was formed via the reaction between fluorine-rich organic reagents and Li metal. It is composed of highly Li+-conducting LixBOy, LiF, LixNOy, Li3N particles and some organic compounds, in which LixBOy serves as a binder to enhance its mechanical strength. With the protective SEI, the coulombic efficiency of Li plating/stripping in DMI electrolyte increased from 20% to 98.5% and the fixed capacity cycle life of the assembled LOB was elongated to 205 rounds, which was almost fivefold of the cycle life in dimethyl sulfoxide (DMSO) or tetraglyme (TEGDME) based electrolytes. Our work demonstrates that molecular polarity and ionic solvation structure are the primary issues to be considered when designing high performance Li–O2 battery electrolytes, and cross-linked artificial SEI is effective in improving the anodic stability.

Regulating the Architecture of a Solid Electrolyte Interface on a Li-Metal Anode of a Li–O2 Battery by a Dithiobiuret Additive

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Protecting the Li-Metal Anode in a Li-O-2 Battery by Using Boric Acid As an SEI-Forming Additive

Tuning Solid Electrolyte Interface Against Oxygen/superoxide-Derived Attack on Li-metal Anode in Li-O2 Battery

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

Integrated Design for Regulating the Interface of a Solid-State Lithium-Oxygen Battery with an Improved Electrochemical Performance.

Stable Solvent-Derived Sulfur-Rich Inorganic Solid Electrolyte Interphase Via Solvation Modulation for Lithium Metal Batteries

High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries.

Solvent-derived Inorganic F and N-rich Solid Electrolyte Interface for Stable Lithium Metal Batteries

Tuning the Solution Structure of Electrolyte for Optimal Solid-Electrolyte-interphase Formation in High-Voltage Lithium Metal Batteries

Acceleration of interfacial kinetics induced by regulation of Li + desolvation process in lithium metal-based batteries

Bi-containing Electrolyte Enables Robust and Li Ion Conductive Solid Electrolyte Interphase for Advanced Lithium Metal Anodes

Dynamical SEI Reinforced by Open‐Architecture MOF Film with Stereoscopic Lithiophilic Sites for High‐Performance Lithium–Metal Batteries

1,3-Dimethyl-2-imidazolidinone: an ideal electrolyte solvent for high-performance Li–O2 battery with pretreated Li anode

Constructing a conductive solid electrolyte interface by adding lithium nitrate into carbonate electrolyte for stable lithium metal anode

1,3,2-Dioxathiolane 2,2-Dioxide as a Bifunctional Electrolyte Additive to Enhance the Stability of Lithium Metal Anodes

Beyond LiF: Tailoring Li2O-Dominated Solid Electrolyte Interphase for Stable Lithium Metal Batteries.

Construction of a Dense and Li-N Rich Solid Electrolyte Interface for Dendrite-Free Lithium Metal Batteries

Phosphonium Bromides Regulating Solid Electrolyte Interphase Components and Optimizing Solvation Sheath Structure for Suppressing Lithium Dendrite Growth