Abstract:Lithium anode protection is an effective strategy to prohibit the continuous loss of redox mediators (RMs) resulting from the unfavorable "shuttle effect" in lithium–oxygen batteries. In this work, an in situ Li anode protection method is designed by utilizing an organic compound, 1-Boc-3-iodoazetidine (BIA), as both a RM and an additive, to form a lithium anode protective layer. The reaction between Li metal and BIA can form lithium iodide (LiI) and lithium-based organometallic. LiI can effectively reduce the charging overpotential. Meanwhile, the in situ-formed anode protection layer (lithium-based organometallic) can not only effectively prevent RMs from being reduced by the lithium metal, but also inhibit the growth of lithium dendrites. As a result, the lithium–oxygen battery with BIA shows a long cycle life of 260 cycles with a notably reduced charging potential. In particular, the battery with BIA achieves an excellent lifespan of 160 cycles at a large current density of 2000 mA g–1.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02192?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02192</a>.Li 1s and O 1s XPS spectra of Li after immersing in 1-Boc-3-iodoazetidine; cyclic voltammograms of Li-O2 cells under Ar with LiI or BIA; SEM image of the pristine Li film and BIA-treated Li film; SEM images of the pristine cathode and cathodes after discharging and charging with LiI or BIA; discharge/charge profiles of Li-O2 cells with BIA; SEM images of the cathodes after cycling; XPS spectra of the cathodes after cycling; SEM images of the anodes after cycling; XPS spectra of the Li anodes from the Li-O2 cells with BIA after first and fifth cycles; FTIR spectra of the Li anodes from the BIA-containing Li-O2 cell after first and fifth cycles; EIS comparison between Li-O2 batteries with LiI and BIA; electrochemical performance of the Li-O2 cells with LiI or BIA at 1000 mA g–1 and SEM images of the Li anodes after cycling; and discharge/charge profiles of Li-O2 cells without and with BIA (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02192/suppl_file/am1c02192_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Protecting the Li-Metal Anode in a Li-O-2 Battery by Using Boric Acid As an SEI-Forming Additive

Enhanced Cycling Performance of Li–O2 Battery by Using a Li3PO4-Protected Lithium Anode in DMSO-Based Electrolyte

Building a stable artificial solid electrolyte interphase on lithium metal anodes toward long-life Li–O 2 batteries

In Situ Formed Continuous and Dense Inorganic Borate‐Based SEI for High‐Performance Li‐Metal Batteries

Li2MoO4 tailored Anion‐enhanced Solvation Sheath Layer Promotes Solution‐phase Mediated Li‐O2 Batteries

Borate-Based Artificial Solid-Electrolyte Interphase Enabling Stable Lithium Metal Anodes

Mechanochemical Reactions Between Polyanionic Borate and Residue Li2CO3 on LiCoO2 to Stabilize Cathode/electrolyte Interface in Sulfide-Based All-Solid-state Batteries

Stabilizing Lithium-Oxygen Batteries through In Situ Generated Phenyl/LiF-Rich Hybrid SEI Layer with Sulfonyl Fluoride Electrolyte Additive

Stable LiMetal Anode Enabled by Simultaneous Regulation of Electrolyte Solvation Chemistry and The Solid Electrolyte Interphase

Bifunctional 1-Boc-3-Iodoazetidine Enhancing Lithium Anode Stability and Rechargeability of Lithium–Oxygen Batteries

Interphase Building of Organic–Inorganic Hybrid Polymer Solid Electrolyte with Uniform Intermolecular Li + Path for Stable Lithium Metal Batteries

In situ regulated solid electrolyte interphase via reactive separators for highly efficient lithium metal batteries

Stable artificial solid electrolyte interfaces for lithium batteries

Self‐Induced Dual‐Layered Solid Electrolyte Interphase with High Toughness and High Ionic Conductivity for Ultra‐Stable Lithium Metal Batteries

Stabilized Solid Electrolyte Interphase Induced by Ultrathin Boron Nitride Membranes for Safe Lithium Metal Batteries

Acceleration of interfacial kinetics induced by regulation of Li + desolvation process in lithium metal-based batteries

Safe Lithium‐Metal Anodes for Li−O2 Batteries: from Fundamental Chemistry to Advanced Characterization and Effective Protection

A Supramolecular Deep Eutectic Electrolyte Enhancing Interfacial Stability and Solution Phase Discharge in Li-O2 Batteries

An effective approach to protect lithium anode and improve cycle performance for Li-S batteries.

Boron‐Doped Electrolytes as Interfacial Modifiers for High‐Rate Stable Lithium Metal Batteries

Dynamical SEI Reinforced by Open‐Architecture MOF Film with Stereoscopic Lithiophilic Sites for High‐Performance Lithium–Metal Batteries