Abstract:316 stainless steel (SS) was coated with CoCrFeNiNbx (x: atomic ratio, x = 0, 0.1, 0.2, and 0.3) high entropy alloy coatings (HEACs) by laser cladding (LC). The impacts of Nb content on the phase composition, microstructure, microhardness, wear resistance and corrosion properties of CoCrFeNi based HEACs were examined. Different from the canonical dendritic (DR) - interdendritic (ID) microstructure presented by the other three HEACs, the ID of Nb0.3 HEACs also existed nanoscale Nb-rich Laves phase composed of Nb-Ni and Nb-Co. The inclusion of Nb significantly reduced the average grain size of CoCrFeNi based HEACs from 59.43 mu m to 11.38 mu m. It also greatly diminished the formation of high angle grain boundaries (HAGBs), increasing the percentage of low angle grain boundaries (LAGBs) from 31 % to 61 %. The microhardness of Nb-containing HEACs was significantly promoted due to the solid solution strengthening and fine grain strengthening caused by large size Nb atoms. Affected by Laves phase with high coordination number and space filling ratio and higher proportion of LAGBs, the microhardness of Nb0.3 HEAC was even as high as 530 HV. The increase in Nb concentration also strengthened the HEACs' resistance to wear. Nb0, Nb0.1, Nb0.2, and Nb0.3 HEACs had corresponding specific wear rates of 0.36, 0.32, 0.23, and 0.20 mm3/Nm. Unlike 316 SS, Nb0 and Nb0.1 HEACs, which had both adhesive wear and abrasive wear, Nb0.2 and Nb0.3 HEACs were mainly wear by abrasive wear. The corrosion behavior of CoCrFeNiNbx HEACs in 0.5 M H2SO4 solution was similar to 316 SS, but the corrosion resistance was stronger than 316 SS. Nb0.3 HEAC with the Ecorr of -164 mV and Icorr of 6.40 x 10-7 A/cm2 showed the best acid corrosion resistance, which could be attributed to the stable and dense passivation film on its surface. Distinct from the intergranular corrosion of other coatings, the corrosion of Nb0.3 HEAC mainly occurred in DR, because the FCC phase acted as the anode site in it when FCC and Laves phase co-existed.

The Influence of Nb Addition on the Passivation and Pitting Behavior of CoCrNiNb X Medium Entropy Alloys

The influence of Nb addition on the passivity of CoCrNiNb<i><sub>x</sub></i> multi-principal element alloys

The influence of Nb addition on the passivity of CoCrNiNb multi-principal element alloys

Electrochemical Corrosion Behavior in Sulfuric Acid Solution and Dry Sliding Friction and Wear Properties of Laser-Cladded CoCrFeNiNb High Entropy Alloy Coatings

Effects of Al Addition on Structural Evolution and Mechanical Properties of the CrCoNi Medium-Entropy Alloy

Effects of NbC addition on mechanical and tribological properties of AlCrFeNi medium-entropy alloy

Evaluating the Influence of Adding Nb on Microstructure, Hardness and Oxidation Resistance of Crn Coating

Effect of Al and Nb Addition on the Precipitation Hardening and Deformation Mechanism of CoCrNi Medium Entropy Alloy

Effect of Niobium on Microstructure and Properties of the CoCrFeNbxNi High Entropy Alloys

Clarify the role of Nb alloying on passive film and corrosion behavior of CoCrFeMnNi high entropy alloy fabricated by laser powder bed fusion

Effects of Nb Additions on the Microstructure and Mechanical Property of CoCrFeNi High-Entropy Alloys

Microstructure and Mechanical Properties Investigation of the CoCrFeNiNbx High Entropy Alloy Coatings

Improvement of Microstructure and Mechanical Properties of CoCrCuFeNi High-Entropy Alloys by V Addition

Effects of niobium on the microstructure, corrosion, and mechanical behavior of ultra-fine lamellar Al0.3CrFeCoNiNbx eutectic high-entropy alloys

Effects of Nb content on the microstructure and properties of CoCrFeMnNiNb x high-entropy alloy coatings by laser cladding

Effects of niobium on the microstructure, corrosion, and mechanical behavior of ultra-fine lamellar Al 0.3 CrFeCoNiNb x eutectic high-entropy alloys

Nb Micro-Alloying on Enhancing Yield Strength and Hindering Intermediate Temperature Decomposition of a Carbon-Doped High-Entropy Alloy

Effect of Nb on microstructure and properties of AlCoCrFeNi2.1 high entropy alloy

Effect of Nb Element on Microstructure and Mechanical Properties of (Co30Cr25Fe40Ni5)100−xNbx High-Entropy Alloys

Corrosion and passive behaviors of the Co-Cr-Fe-Ni-Nb eutectic high-entropy alloys in different electrolyte solutions

Effect of Microstructure and Performance of Nb–Cr–Fe–Ni Quaternary Alloys with the Variation of Niobium Element Content