Abstract:It is of significance to reveal the low-cycle fatigue deformation mechanism of titanium alloy with tri-modal microstructure for improving its properties. This work developed a crystal plasticity finite element model based on realistic microstructure to predict the low-cycle fatigue behavior of TA15 titanium alloys with tri-modal microstructure containing primary α (αp), secondary lamellar α (αl) and transformed β (βt). During modelling, plastic strain accumulation (PSA) and energy dissipation were used as the fatigue indicator parameter (FIP) to predict fatigue damage and life. It is found that the fatigue deformation prefers to localize at the interfaces of αp/β, αl/β and at triple junctions, which leads to the initiation of fatigue crack. In addition, the soft geometry of αl will also contribute to the strain localization inside αl grains causing fatigue damage. This is because the local lattice rotation is more prone to occur at these locations due to the tension-compression asymmetry of lattice rotation, which induces the occurrence of the microtexture and aggravates the heterogeneity of the lattice rotation, leading to the localized PSA and the total energy dissipation. And the asymmetry of lattice rotation in each cycle also leads to the tension-compression asymmetry of flow behavior. Both of the two FIPs can effectively predict fatigue life. With the strain amplitude increasing, the PSA-based model shows a relatively higher predictive accuracy of fatigue life than that of the accumulated energy dissipation-based model. The predicted fatigue life is in accordance with the C-M model.

Combined Notch and Size Effect Modeling of Metallic Materials for LCF Using Plasticity Reformulated Critical Distance Theory

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Cyclic Plastic Zone Modified Critical Distance Theory for Notch Fatigue Analysis of Metals

Cyclic Plastic Zone-Based Notch Analysis and Damage Evolution Model for Fatigue Life Prediction of Metals

Probabilistic fatigue modelling of metallic materials under notch and size effect using the weakest link theory

Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory

A Combined CP Theory and TCD for Predicting Fatigue Lifetime in Single-Crystal Superalloy Plates with Film Cooling Holes

Evaluation of Critical Distance, Highly Stressed Volume, and Weakest-Link Methods in Notch Fatigue Analysis

Fatigue Life Prediction of Notched Components under Size Effect Using Critical Distance Theory

Probabilistic fatigue assessment of notched components under size effect using critical distance theory

Fatigue life prediction of notched components under size effect using strain energy reformulated critical distance theory

Probabilistic Notch Fatigue Assessment under Size Effect Using Weakest Link Theory

Probabilistic Modelling of Notch and Size Effect of Components under Fatigue Loadings

Low-cycle Fatigue Behavior and Life Prediction of TA15 Titanium Alloy by Crystal Plasticity-Based Modelling

Combined TCD and HSV approach for probabilistic assessment of notch fatigue considering size effect

Multiaxial Low Cycle Fatigue Assessment of Notch Specimens for 10crni3mov Steel and Its Welds

Multiaxial Fatigue Analysis of Notched Components Using Combined Critical Plane and Critical Distance Approach

A Low-Cycle Fatigue Life Model of Nickel-Based Single Crystal Superalloys under Multiaxial Stress State

Energy Field Intensity Approach for Probabilistic Notch Fatigue Assessment under Size Effect

Evaluation of Size Effect in Low Cycle Fatigue for Q&T Rotor Steel

Evaluation of Notch Size Effect on LCF Life of TA19 Specimens Based on the Stress Gradient Modified Critical Distance Method