Abstract:In this paper, a simplified thermodynamics analysis of cyclic plastic deformation is performed in order to establish an energy transition relation for describing the elastic–plastic stress and strain behavior of the notch-tip material element in bodies subjected to multiaxial cyclic loads. Based on the thermodynamics analysis, it is deduced that in the case of elastic–plastic deformation, Neuber’s rule inevitably overestimates the actual stress and strain at the notch tip, while the equivalent strain energy density (ESED) method tends to underestimate the actual notch-tip stress and strain. According to the actual energy conversion occurring in the notch-tip material element during cyclic plastic deformation, a unified expression for estimating the elastic–plastic notch stress–strain responses in bodies subjected to multiaxial cyclic loads is developed, of which Neuber’s rule and the ESED method become two particular cases, i.e. upper and lower bound limits of the notch stress and strain estimations. This expression is verified experimentally under both proportional and non-proportional multiaxial cyclic loads and a good agreement between the calculated and the measured notch strains has been achieved. It is also shown that in the case of multiaxial cyclic loading, the unified expression distinctly improves the accuracy of the notch-tip stress–strain estimations in comparison with Neuber’s rule and the ESED method. The unified expression of the notch stress–strain calculation developed in this paper can thus provide a more logical approximate approach for estimating the elastic–plastic notch-tip stress and strain responses of components subjected to lengthy multiaxial cyclic loading histories for local strain approach-based fatigue-crack-initiation life prediction.

Cyclic Plastic Zone Modified Critical Distance Theory for Notch Fatigue Analysis of Metals

A Model for Ultra Low Cycle Fatigue Damage Prediction of Structural Steel

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

Probabilistic fatigue assessment of notched components under size effect using critical distance theory

Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

Cohesive zone modelling of low cycle fatigue cracks in cracked and notched specimens

Fatigue life prediction of notched components under size effect using strain energy reformulated critical distance theory

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Assessing notch fatigue performance of aluminium alloy AA2024-T4 after uni-axial and equi-biaxial tensile pre-straining: Experimental observations and predictive models

The effect of notch size on critical distance and fatigue life predictions

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Probabilistic Fatigue Life Framework of Notched Specimens Based on the Weibull Distribution Under Multiaxial Loading

Probabilistic fatigue modelling of metallic materials under notch and size effect using the weakest link theory

Fatigue life prediction of notched components based on energy gradient using reconstructed critical distance theory

Research on Accumulative Plastic Damage for Low-Cycle Fatigue Analysis of Hull Notched Plate

Low Cycle Fatigue Life Evaluation of Notched Specimens Considering Strain Gradient

Development of a non-local approach for life prediction of notched specimen considering stress/strain gradient and elastic-plastic fatigue damage