Abstract:Foldable perovskite solar cells (PSCs) have promising applications in self‐powered wearable and portable electronic devices. However, the folding stability requires further improvement through mitigating the strain in brittle layers under folding deformation. In this work, sandwich‐structured PSCs (SS‐PSCs) was constructed by coating protection layer at the back of device, to tune the neutral plane (NP) place into the brittle perovskite films. To accurately regulating the NP place, the effect of protective layer thickness on the strain distribution in PSCs under extreme folding radius was simulated. The SS‐PSCs were experimentally prepared using Al2O3/PET protection layer with optimum thickness, combined with ultrathin silver foldable electrodes. Benefitting from the water‐resisting Al2O3/PET, the SS‐PSCs demonstrated high environment stability which maintained 85.1% of original efficiency after 700 h in humidity of 50 ± 10%. More importantly, the SS‐PSCs exhibited excellent mechanical stability, which maintained >90% of the initial efficiency after bending with 4000 cycles at radius of 0.2 mm, and even 67.2% of the initial efficiency after 50 direct folding cycles, much better than that of the conventional PSCs without protection layer. As far as we known, it was one of the best mechanical stable devices. At last, the failure mechanism of PSCs under folding deformation was deeply analyzed based on the crack propagation behavior of perovskite films with applied strain. Our findings pave the way for realizing not only foldable PSCs but also other foldable optoelectronic devices, such as sensors and organic light emitting devices. This article is protected by copyright. All rights reserved.

Mechanical Stability Study on PEDOT:PSS-Based ITO-Free Flexible Perovskite Solar Cells

Concave And Convex Bending Influenced Mechanical Stability In Flexible Perovskite Solar Cells

Interface Bonding Engineering Of A Transparent Conductive Electrode Towards Highly Efficient And Mechanically Flexible Ito-Free Organic Solar Cells

Enhancing Power Conversion Efficiency and Anti-Bending Ability of Flexible Perovskite Solar Cells with PEDOT:PSS:Li Hole Transport Layer

Layer conductance reduction and failure analysis due to bending for superflexible perovskite solar cells

A Review: Flexible Perovskite Solar Cells Towards High Mechanical Stability

Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Degradation Mechanism of Flexible Perovskite Solar Cells: Investigated by Tracking of the Heterojunction Property

Sandwiched structure design for perovskite solar cells with improved folding and environmental stability

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

Simultaneously Enhancing Moisture and Mechanical Stability of Flexible Perovskite Solar Cells Via a Polyimide Interfacial Layer

Mechanism and Regulation of Tensile-Induced Degradation of Flexible Perovskite Solar Cells

Ameliorating the Interfacial Mismatch of SnO2 and Perovskite Enabling High Mechanical Stability for Flexible Perovskite Solar Cells

Surface modulus reconstruction toward robust flexible perovskite solar cells

Buried Interface Optimization for Flexible Perovskite Solar Cells with High Efficiency and Mechanical Stability

Thermally driven self-healing efficient flexible perovskite solar cells

Intrinsic Thermal Stability of Inverted Perovskite Solar Cells Based on Electrochemical Deposited PEDOT

Dependence of ITO‐Coated Flexible Substrates in the Performance and Bending Durability of Perovskite Solar Cells

ffi cient , and metal oxide-free perovskite solar cell †

Review on Tailoring PEDOT:PSS Layer for Improved Device Stability of Perovskite Solar Cells