An S-scheme Heterojunction Constructed from Α-Fe2o3 and In-doped Carbon Nitride for High-Efficiency CO2 Photoreduction

Jiaming Wu,Keyan Li,Jiahui Li,Jun Du,Xiangyang Li,Chunshan Song,Xinwen Guo

DOI: https://doi.org/10.1039/d1cy02215f

IF: 6.177

2022-01-01

Catalysis Science & Technology

Abstract:An S-scheme heterojunction is constructed with α-Fe2O3 nanoparticles and In–CN nanosheets as a highly efficient photocatalyst for CO2 reduction.

What problem does this paper attempt to address?

An S-scheme heterojunction constructed from α-Fe 2 O 3 and In-doped carbon nitride for high-efficiency CO 2 photoreduction

Jiaming Wu,Keyan Li,Jiahui Li,Jun Du,Xiangyang Li,Chunshan Song,Xinwen Guo

DOI: https://doi.org/10.1039/d1cy02215f

2022-01-01

Abstract:An S-scheme heterojunction is constructed with α-Fe 2 O 3 nanoparticles and In–CN nanosheets as a highly efficient photocatalyst for CO 2 reduction.

chemistry, physical
Ultrafast Electron Transfer at the In2O3/Nb2O5 S-scheme Interface for CO2 Photoreduction

Xianyu Deng,Jianjun Zhang,Kezhen Qi,Guijie Liang,Feiyan Xu,Jiaguo Yu

DOI: https://doi.org/10.1038/s41467-024-49004-7

IF: 16.6

2024-01-01

Nature Communications

Abstract:Constructing S-scheme heterojunctions proves proficient in achieving the spatial separation of potent photogenerated charge carriers for their participation in photoreactions. Nonetheless, the restricted contact areas between two phases within S-scheme heterostructures lead to inefficient interfacial charge transport, resulting in low photocatalytic efficiency from a kinetic perspective. Here, In2O3/Nb2O5 S-scheme heterojunctions are fabricated through a straightforward one-step electrospinning technique, enabling intimate contact between the two phases and thereby fostering ultrafast interfacial electron transfer (<10 ps), as analyzed via femtosecond transient absorption spectroscopy. As a result, powerful photo-electrons and holes accumulate in the Nb2O5 conduction band and In2O3 valence band, respectively, exhibiting extended long lifetimes and facilitating their involvement in subsequent photoreactions. Combined with the efficient chemisorption and activation of stable CO2 on the Nb2O5, the resulting In2O3/Nb2O5 hybrid nanofibers demonstrate improved photocatalytic performance for CO2 conversion.
Fabrication of Novel CoO/porous Graphitic Carbon Nitride S-scheme Heterojunction for Efficient CO2 Photoreduction

Feifei Mei,Jinfeng Zhang,Changhao Liang,Kai Dai

DOI: https://doi.org/10.1016/j.matlet.2020.128722

IF: 3

2021-01-01

Materials Letters

Abstract:The construction of heterojunction plays a key role in solving the charge separation and transfer at the interface of photocatalyst. Herein, a new type of step-scheme (S-scheme) heterojunction was formed by growing cobalt oxide (CoO) in situ on porous graphitic carbon nitride (PCN) to convert CO2 to CO. The porous structure of PCN can increase the absorption of CO2 and act as an active site. The special charge separation of S-scheme heterojunction can give CoO/PCN system with strong redox ability. And S-scheme heterojunction can accelerate charge separation and transfer at the interface. Compared with CoO and PCN, CoO/PCN composites exhibits a higher CO2 reduction rate (40.31 mu mol g(-1)h(-1)), 3.43 and 23.85 times higher than that of CoO (11.73 mu mol g(-1)h(-1)) and PCN (1.69 mu mol g(-1)h(-1)), respectively. (C) 2020 Elsevier B.V. All rights reserved.
Unlocking the Charge‐Migration Mechanism in S‐Scheme Junction for Photoreduction of Diluted CO2 with High Selectivity

Kai Wang,Qiang Cheng,Weidong Hou,Huazhang Guo,Xinhe Wu,Juan Wang,Jinmao Li,Zheng Liu,Liang Wang

DOI: https://doi.org/10.1002/adfm.202309603

IF: 19

2024-01-01

Advanced Functional Materials

Abstract:The rational design of an S-scheme heterojunctions in hybrid semiconductors to realize separated charge carriers and sufficient redox ability is considered as an attractive way to achieve high photocatalytic activity in diluted CO2 reduction (DCR). An S-scheme heterojunction formed in the fibrous Ta2O5/Ag2S nanostructures is proposed for improving the photocatalytic performance in DCR under simulated solar irradiation. Benchmark CH4 production rates of 132.3 mu mol g(-1) are obtained with 93.1% selectivity over optimal catalyst ASTO-2. The remarkable activity in photocatalytic DCR of Ta2O5/Ag2S is attributed to the unique 0D/1D structure and effective charge separation by the photoinduced strong internal electric field and S-scheme mechanism. The measurements of in situ X-ray photoelectron spectroscopy, femtosecond transient absorption spectroscopy, and electron paramagnetic resonance further confirm the photoinduced carrier transfer pathways following the S-scheme mechanism. This research can provide a new strategy for designing the S-scheme heterojunctions to improve the photocatalytic performance of diluted CO2 conversion.
3D Fe-MOF embedded into 2D thin layer carbon nitride to construct 3D/2D S-scheme heterojunction for enhanced photoreduction of CO2

Xiaoxue Zhao,Mengyang Xu,Xianghai Song,Weiqiang Zhou,Xin Liu,Pengwei Huo

DOI: https://doi.org/10.1016/s1872-2067(22)64115-9

IF: 16.5

2022-01-01

Chinese Journal of Catalysis

Abstract:Regulating charge transfer to achieve specific transfer path can improve electron utilization and complete efficient photoreduction of CO2. Here, we fabricated a S-scheme heterojunction of CN/Fe-MOF by an in-situ assembly strategy. The S-scheme charge transfer mechanism was confirmed by band structure, electron spin resonance (ESR) and work function (Φ) analysis. On the one hand, the response of Fe-MOF in the visible region improved the utilization of light energy, thus increasing the ability of CN/Fe-MOF to generate charge carriers. On the other hand, CN, as the active site, not only had strong adsorption capacity for CO2, but also retained photogenerated electrons with high reduction capacity because of S-scheme charge transfer mechanism. Hence, in the absence of any sacrificial agent and cocatalyst, the optimized 50CN/Fe-MOF obtained the highest CO yield (19.17 μmol g−1) under UV-Vis irradiation, which was almost 10 times higher than that of CN. In situ Fourier transform infrared spectra not only revealed that the photoreduction of CO2 occurred at the CN, but also demonstrated that the S-scheme charge transfer mechanism enabled 50CN/Fe-MOF to have a stronger ability to generate HCOO− than CN.

chemistry, physical,engineering, chemical, applied
S-scheme heterojunction based on p-type ZnMn2O4 and n-type ZnO with improved photocatalytic CO2 reduction activity

Hongzhao Deng,Xingang Fei,Yi Yang,Jiajie Fan,Jiaguo Yu,Bei Cheng,Liuyang Zhang

DOI: https://doi.org/10.1016/j.cej.2020.127377

IF: 15.1

2021-04-01

Chemical Engineering Journal

Abstract:Inspired by the carbon cycle in nature, it is promising to convert CO2 into energy-dense hydrocarbon fuels via photocatalytic CO2 reduction. In the present paper, hierarchical ZnMn2O4/ZnO nanofibers were prepared as photocatalysts by electrospinning and calcination. They outperformed pristine ZnO nanofibers with about 4-fold increment in CO and CH4 yields. Except for the advantages coming from the design, such as more exposed active sites and multiple light reflections, other benefits derived from interface charge transfer are also important. To uncover this, density functional theory calculation (DFT), along with X-ray photoelectron spectroscopy (XPS) was performed. Photoluminescence (PL) and time-resolved PL spectroscopy revealed that the charge separation efficiency in the composite was significantly elevated. Step-scheme (S-scheme) charge transfer was testified in the composite. This result, for the first time, exemplifies that S-scheme charge-transfer can also be realized in heterojunction based-on p-type ZnMn2O4 and n-type ZnO. It provides a new insight into the design of other S-scheme photocatalysts, which are composed of p-type and n-type semiconductors.

engineering, chemical, environmental
One-pot Solvothermal Synthesis of Flower-Like Fe-doped In2S3/Fe3S4 S-scheme Hetero-Microspheres with Enhanced Interfacial Electric Field and Boosted Visible-Light-driven CO2 Reduction

Tongfei Xu,Xiaoxuan Su,Yijia Zhu,Shahid Khan,De-Li Chen,Changfa Guo,Jiqiang Ning,Yijun Zhong,Yong Hu

DOI: https://doi.org/10.1016/j.jcis.2022.09.132

IF: 9.9

2023-01-01

Journal of Colloid and Interface Science

Abstract:S-scheme heterojunctions hold great potential for CO2 photoreduction into solar fuels, but their activities are severely limited by the low efficiency of interfacial charge transfer. In this work, a facile one-pot solvothermal reaction has been developed to dope Fe into flower-like In2S3/Fe3S4 hetero-microspheres (Fe-In2S3/Fe3S4 HMSs), which are demonstrated as an efficient S-scheme photocatalyst for visible-light-driven CO2 photoreduction. The doping of Fe not only reduces the bandgap of In2S3 and thus extends the optical response to the visible-light region, but also increases the densities of donors and sulfur vacancies, which leads to an elevated Fermi level (Ef). The difference of Ef between In2S3 and Fe3S4 is enlarged and their band bending at the interface is therefore enhanced, which results in promoted carriers transfer in the S-scheme pathway due to the reinforced interfacial electric field. Moreover, Fe-doped In2S3 reduces the formation energy of the *CO intermediate, which thermodynamically favors the CO evolution at the surface. As a result, the Fe-In2S3/Fe3S4 HMSs exhibit a significantly boosted CO2 photoreduction activity in comparison with bare In2S3 and Fe-In2S3 samples. This work demonstrates the great potential of heteroatom-engineered S-scheme photocatalysts for CO2 photoreduction.
Photothermal-boosted S-scheme Heterojunction of Α-Fe 2 O 3 @nio X for High-Selective Reduction of CO2 2 to CO

Xiao Liu,Bai Kaihui,Yuhang Nie,Xusheng Wang,Lang Pei

DOI: https://doi.org/10.1016/j.apsusc.2024.160747

IF: 6.7

2024-01-01

Applied Surface Science

Abstract:Self-heating photothermal catalysis, combining light promotion and thermal activation, offers unique advantages for CO2 2 conversion. The meticulous design of active sites and light-absorbing materials is crucial for highperformance photothermal catalysts. Herein, a S-Scheme heterostructure composed of NiOx x subunits with abundant oxygen vacancies (Vo) bonded with alpha-Fe2O3 2 O 3 nanoplatelets has been fabricated for solar-driven photothermal catalytic CO2 2 reduction. Under continuous full-spectrum light irradiation (0.3 W & sdot;cm-- 2 ), the alpha-Fe2O3@NiOx 2 O 3 @NiO x hybrids exhibited a CO yield rate of 199.3 mu mol center dot g-- 1 & sdot;h-1 & sdot;h- 1 in a gas-solid reaction models with near- unity selectivity. Additionally, the apparent quantum yield for CO production at 420 nm reaches 1.56 %. The prominent activity is attributed to three key factors: (1) The Vo-rich NiOx x facilitates the accumulation of photogenerated electrons and activation of chemisorbed CO2. 2 . (2) The implemented S-Scheme heterostructures boost interfacial charge-transfer and provide spatially separated catalytic sites for efficient overall CO2 2 reduction. (3) The substantial photothermal effect of NiOx, x , which arises from nonradiative exciton recombination, induces local heating of the catalyst, thereby enhancing reaction kinetics. This work provides valuable insights into the utilization of a photothermal-photocatalytic S-Scheme heterojunction system for the photothermal catalytic CO2 2 reduction.
In2O3/Bi19Br3S27 S-scheme Heterojunction with Enhanced Photocatalytic CO2 Reduction

Yuqin Bian,Houwei He,Graham Dawson,Jinfeng Zhang,Kai Dai

DOI: https://doi.org/10.1007/s40843-023-2725-y

2024-01-01

Abstract:In recent years, semiconductor catalysts have attracted lots of attention due to their substantial redox capability and adequate stability. However, many semiconductor catalysts have difficulties in realizing real word applications because of the high complexation and low oxidizing ability of photogenerated electron-holes. In-depth investigation has revealed that the S-scheme heterojunction possesses a unique mechanism of carrier movement, resulting in a robust redox capacity and strong driving force. Herein, we synthesized an In2O3/Bi19Br3S27 step-scheme (S-scheme) heterojunction through the hydrothermal method comprised of Bi19Br3S27 nanoflowers grown on In2O3 nanospheres. This configuration effectively facilitates the separation and transfer of photogenerated charge carriers. As a result, the reduction yield of CO2 by In2O3/Bi19Br3S27 composite reaches 28.36 mu mol h(-)(1) g(-)(1), which is 19 times higher than that of In2O3 and 3.5 times higher than that of Bi19Br3S27. Furthermore, the intermediates involved in the photocatalytic reaction were examined through in situ diffuse reflectance infrared Fourier transform spectroscopy, revealing the reaction process of photocatalytic reduction of CO2. This work offers a concept on the method of constructing S-scheme heterojunction photocatalysts to enhance the catalyzed reduction of CO2.
Enhanced CO2 Reduction Via S-Scheme Heterojunction of Amorphous/Crystalline Metal-free Carbon Nitride Photocatalysts

Liting Wu,Dingyi Yang,Yalin Dong,Ze Wang,Yu Zhang,Tingting Wang,Liang Cheng,Yong Wang,Yizhang Wu

DOI: https://doi.org/10.1016/j.cej.2024.156777

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Metal-free carbon nitride nanosheets (CNs) are promising photocatalysts, but face challenges with severe charge recombination and limited visible light absorption. To overcome these challenges, we have developed a 2D/2D amorphous/crystalline carbon nitride (CNs/CCN) S-scheme heterojunction photocatalyst through electrostatic self-assembly. The built-in electric field in the CNs/CCN heterojunction facilitates an S-scheme transfer of photogenerated electrons from CCN to CNs, effectively enhancing electron-hole separation. Our optimized CNs/ CCN-1/3 heterojunction exhibits substantially higher production rates of CO and CH4 4 compared to its individual components. Notably, CNs/CCN-1/3 maintains excellent CO2 2 reduction efficiency even under irradiation at wavelengths exceeding 700 nm. This study introduces an innovative strategy for the development of CNs-based photocatalysts with improved charge separation and enhanced visible-light absorption.
Bi 2 WO 6 /C 3 N 4 S-Scheme Heterojunction with a Built-In Electric Field for Photocatalytic CO 2 Reduction

Qiaoya Tang,Wei Tao,Jianqiang Hu,Tian Gui,Zhipeng Wang,Yuting Xiao,Renjie Song,Yong Jiang,Shien Guo

DOI: https://doi.org/10.1021/acsanm.3c03349

IF: 6.14

2023-09-06

ACS Applied Nano Materials

Abstract:Converting CO2 into renewable fuels by solar energy has been considered an ideal strategy to mitigate the climate crisis and address the fossil fuel depletion problem. However, severe charge carrier recombination and sluggish interfacial reaction dynamics make it a challenge to achieve high conversion efficiency. Herein, a unique 2D/2D step-scheme (S-scheme) photocatalyst of Bi2WO6/C3N4 (BWO/CN) is constructed by a facile electrostatic self-assembly strategy. The ultrathin 2D/2D heterostructure endowed the BWO/CN hybrid with abundant contact interfaces, short charge-transport distance, and relatively more accessible reaction sites. Besides, the differences of work function between CN and BWO induced the formation of a built-in electric field, resulting in much enhanced interfacial charge transfer/separation rates. As a result, the optimized BWO/CN heterojunction exhibits significantly improved photocatalytic performance toward CO2 reduction, which is approximately 2.8-fold higher than that of its CN counterpart. The accelerated S-scheme charge-transfer mechanism is systematically corroborated by X-ray photoelectron spectroscopy, photo-irradiated Kelvin probe force microscopy, and electron spin resonance. This research may provide a facile protocol for the rational design of an S-scheme face-to-face 2D/2D heterojunction for efficient CO2 conversion.

materials science, multidisciplinary,nanoscience & nanotechnology
Novel p- and n-type S-scheme heterojunction photocatalyst for boosted CO2 photoreduction activity

Xinxin Han,Bingjie Lu,Xin Huang,Cheng Liu,Shixia Chen,Jingwen Chen,Zheling Zeng,Shuguang Deng,Jun Wang

DOI: https://doi.org/10.1016/j.apcatb.2022.121587

2022-11-05

Abstract:S-scheme photocatalysts are more efficient than the conventional type-II configuration, but the CO2 reduction performances are still unsatisfactory. Herein, we firstly report the layered double hydroxide (LDH) based S-scheme heterostructure photocatalyst (NiIn LDH/In2S3) with n-type NiIn LDH and p-type In2S3. The built-in internal electric field directs the photogenerated electrons flow from the conductive band of In2S3 to the valance band of NiIn LDH, which is confirmed by operando and theoretical experiments. The CO2 photoreduction intermediates are monitored by in-situ Raman spectra, and the density functional calculations disclose the reduced energy barrier for CO desorption on the heterojunction. Therefore, without cocatalysts or sacrificial agents, the NiIn LDH/In2S3 heterojunction delivers a high CO yield rate of 29.43 μmol g−1 h−1 under visible light irradiation, ca. 3.5 and 4.3 times higher than the single counterpart NiIn LDH and In2S3. Notably, this value is the highest among S-scheme CO2 photocatalysts and surpasses most top-ranking benchmarks.

chemistry, physical,engineering, chemical, environmental
Direct Z-scheme Sn-In2O3/In2S3 heterojunction nanostructures for enhanced photocatalytic CO2 reduction activity

Yinyi Ma,Zemin Zhang,Xiao Jiang,Rongke Sun,Mingzheng Xie,Weihua Han

DOI: https://doi.org/10.1039/d1tc00014d

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:We successfully designed and prepared a Sn-In2O3/In2S3 composite photocatalyst with high heterojunction interface quality, which realized Z-scheme photocarrier transfer and high-efficiency photocatalytic carbon dioxide reduction.
S‐scheme heterojunction of thin-layer O-modified graphitic carbon nitride/cobalt porphyrin to promote photocatalytic CO 2 conversion

Zeen Zheng,Qian Zheng,Binnan Qiao,Hangmin Xu,Kang Zhong,Jinman Yang,Minqiang He,Yanhua Song,Xingwang Zhu

DOI: https://doi.org/10.1016/j.jcis.2024.04.067

IF: 9.9

2024-04-14

Journal of Colloid and Interface Science

Abstract:The emissions of CO 2 are increasing year by year, which have led to serious environmental problems. Converting CO 2 into valuable fuels through photocatalysis is a promising strategy. In this research, oxygen atoms were successfully innovated into graphitic carbon nitride (CN). Additionally, cobalt porphyrin (CoTPP) was successfully loaded onto the modified carbon nitride (Co/CN). The generation of interfacial electric fields and bending bands between CN and CoTPP was demonstrated experimentally. The electrons in the CN and the holes in the CoTPP were combined to form a unique S-scheme heterojunction structure, and efficient separation of carriers was promoted. As a result, the CO conversion under visible light irradiation reached an impressive 100.70 μmol g −1 h −1 . By integrating theoretical and experimental findings, this study underscores the critical role of catalyst design in enabling efficient photocatalytic CO 2 reduction.

chemistry, physical
Band structure modulated 2D/2D ZnIn2S4@amorphous polymeric g-C3N4 S-scheme heterojunction for efficient photocatalytic reduction of CO2

Hang Zhao,Dechao Wang,Xiaoling Xue,Xun Zhu,Dingding Ye,Yang Yang,Hong Wang,Rong Chen,Qiang Liao

DOI: https://doi.org/10.1039/d4ta02001d

IF: 11.9

2024-05-23

Journal of Materials Chemistry A

Abstract:The use of solar energy to convert CO2 into high-value-added solar fuels via photocatalytic reaction represents a promising technology to address climate change issues. Herein, a unique 2D/2D S-scheme ZIS@APCN heterojunction is developed by in-situ growth of ZnIn2S4 nanosheets (ZIS) onto porous two-dimensional amorphous polymeric carbon nitride (APCN) with finely-tunned band structure for photocatalytic reduction of CO2. Benefited from ultra-thin two-dimensional and rigorous pore structures, notably enhanced CO2 adsorption and increased active surface area are ensured. Moreover, the formed S-scheme heterojunction effectively promotes the separation of electron-hole pairs. The optimized S-scheme ZIS@APCN yields a CO production rate as high as 1425 μmol·g-1·h-1, surpassing pure APCN by ~7.34 times and ZIS by ~3.98 times while maintaining a high CO selectivity of 81.6%. This work introduces a new approach to develop a S-scheme heterojunction for efficient photoreduction of CO2 by modulating the band structure.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Facilitating charge separation by constructing CuInS2/PCN S-scheme heterojunction with the intimate contact interface for enhanced photocatalytic CO2 reduction

Kefen Yang,Jinman Yang,Yusupu Yesire,Kang Zhong,Pengcheng Yan,Huanzhi Liu,Huaming Li,Yanhua Song,Minqiang He,Hui Xu

DOI: https://doi.org/10.1016/j.seppur.2024.126808

IF: 8.6

2024-08-01

Separation and Purification Technology

Abstract:Photocatalytic CO2 conversion efficiency is still much lower than what is expected owing to the sluggish charge separation and transfer for many semiconductors. Herein, we fabricated a highly efficient S-scheme heterojunction by integrating the CuInS2 (CIS) with the oxygen-doping brown polymer carbon nitride (PCN). The construction of CIS/PCN S-scheme heterojunction promotes spatial separation of photogenerated charge while maintaining their strong reduction capability. The formed intimate contact interface between the CIS and PCN provides the strong driving force for the transfer of photogenerated charge, which accelerates the electrons rapidly migrating from PCN to CIS through the tight interface, resulting in more reductive electrons participating in photocatalytic reaction. As a result, the CIS/PCN S-scheme heterostructure shows a remarkably enhanced photocatalytic activity with a CO yield rate of up to 105.89 μmol g-1h−1, which is 7 times higher than that of the CIS. Combined density functional theory (DFT) calculations with experimental results demonstrate the formation of an intimate contact interface is not only more conducive to CO2 adsorption and activation but also lowers the reaction energy barrier of the conversion of CO2 to CO. Meanwhile, ESR characterization reveals the electron transfer pathway of CIS/PCN for photocatalytic CO2 conversion. This work may provide an illuminating insight into designing the S-scheme photocatalyst for enhanced CO2 photoreduction.

engineering, chemical
S-Scheme Heterojunction Photocatalysts for CO2 Reduction

Mingli Li,He Cui,Yi Zhao,Shunli Li,Jiabo Wang,Kai Ge,Yongfang Yang

DOI: https://doi.org/10.3390/catal14060374

IF: 3.9

2024-06-13

Catalysts

Abstract:Photocatalytic technology, which is regarded as a green route to transform solar energy into chemical fuels, plays an important role in the fields of energy and environmental protection. An emerging S-scheme heterojunction with the tightly coupled interface, whose photocatalytic efficiency exceeds those of conventional type II and Z-scheme photocatalysts, has received much attention due to its rapid charge carrier separation and strong redox capacity. This review provides a systematic description of S-scheme heterojunction in the photocatalysis, including its development, reaction mechanisms, preparation, and characterization methods. In addition, S-scheme photocatalysts for CO2 reduction are described in detail by categorizing them as 0D/1D, 0D/2D, 0D/3D, 2D/2D, and 2D/3D. Finally, some defects of S-scheme heterojunctions are pointed out, and the future development of S-scheme heterojunctions is proposed.

chemistry, physical
A Band Structure Modulated 2D/2D ZnIn2S4@amorphous Polymeric G-C3n4 S-scheme Heterojunction for Efficient Photocatalytic Reduction of CO2

Hang Zhao,Dechao Wang,Xiaoling Xue,Xun Zhu,Dingding Ye,Yang,Hong Wang,Rong Chen,Qiang Liao

DOI: https://doi.org/10.1039/d4ta02001d

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:The use of solar energy to convert CO2 into solar fuels via photocatalytic reduction represents a promising technology to address climate change. Herein, a unique S-scheme heterojunction of 2D/2D ZnIn2S4 nanosheets@amorphous polymeric carbon nitride (ZIS@APCN) is developed by in situ growth of ZnIn2S4 nanosheets onto two-dimensional porous amorphous polymeric carbon nitride with a finely tuned band structure for photocatalytic reduction of CO2. Benefitting from ultra-thin two-dimensional and rigorous porous structures, notably enhanced CO2 adsorption and increased active surface area are ensured. Moreover, the formed S-scheme heterojunction effectively promotes charge separation. The optimized S-scheme heterojunction of ZIS@APCN yields a CO production rate as high as 1425 mu mol g(-1) h(-1), surpassing pure APCN by similar to 7.34 times and ZIS by similar to 3.98 times. This work introduces a new approach to develop S-scheme heterojunction for efficient CO2 photoreduction by modulating the band structure.
Z-scheme heterojunction enhanced photocatalytic performance for CO2 reduction to CH4

Bangli Feng,Qian Wang,Peng Liu,Zibo Yuan,Danxuan Pan,Mingfu Ye,Kejing Shen,Zhifeng Xin

DOI: https://doi.org/10.1039/d4nr02897j

IF: 6.7

2024-09-04

Nanoscale

Abstract:Due to the high charge separation efficiency leading to high photocatalytic activity, there has been significant interest in enhancing the charge separation ability of photocatalysts by controlling the heterojunction structure. To investigate the effect of the heterojunction structure on the photocatalytic performance of composite catalysts and understand its corresponding mechanism, a Z-scheme ZnFe2O4/ZnO/CdS heterojunction was constructed using the ultrasound method and used for CO2 photoreduction. The Z-scheme heterojunction catalyst demonstrates elevated photocatalytic and charge separation efficiencies. Specifically, the conversion rate for the photocatalytic conversion of CO2 to CH4 reaches 105.9 μmol g-1 h-1, surpassing that of the majority of previously reported semiconductor photocatalysts like ZnFe2O4/CdS. This research offers a fresh perspective on the development of innovative heterojunction photocatalysts and broadens the utilization of ternary composite materials in CO2 photoreduction.
Construction of an In2O3/Bi2S3 Z-Scheme Heterojunction for Enhanced Photocatalytic CO2 Reduction

Miaofei Sun,Kai Fan,Chengyin Liu,Tian Gui,Chunhui Dai,Yushuai Jia,Xin Liu,Chao Zeng

DOI: https://doi.org/10.1021/acs.langmuir.4c01195

IF: 3.9

2024-06-18

Langmuir

Abstract:Photocatalytic conversion of CO2 to hydrocarbon fuel is a potential strategy to solve energy shortage and mitigate the greenhouse effect. Here, direct Z-scheme heterojunction photocatalysts (In2O3/Bi2S3) without an electron mediator are prepared by a simple hydrolysis method. The In2O3/Bi2S3 composite photocatalysts show greatly boosted photoactivity on CO2 conversion to CO compared with the pristine In2O3 and Bi2S3. The highest CO evolution rate of 2.67 μmol·g-1·h-1 is achieved by In2O3/Bi2S3-3, without any sacrificial agent or cocatalyst, which is about 3.87 times that of In2O3 (0.69 μmol·g-1·h-1). The boosted photocatalytic performance of In2O3/Bi2S3 composite catalysts can be ascribed to the establishment of a Z-scheme heterojunction, improving the photoabsorption and facilitating charge separation and transfer. This study provides a reference for designing and fabricating high-efficiency Z-scheme heterojunction photocatalysts for photocatalytic CO2 reduction.

An S-scheme Heterojunction Constructed from Α-Fe2o3 and In-doped Carbon Nitride for High-Efficiency CO2 Photoreduction

An S-scheme heterojunction constructed from α-Fe 2 O 3 and In-doped carbon nitride for high-efficiency CO 2 photoreduction

Ultrafast Electron Transfer at the In2O3/Nb2O5 S-scheme Interface for CO2 Photoreduction

Fabrication of Novel CoO/porous Graphitic Carbon Nitride S-scheme Heterojunction for Efficient CO2 Photoreduction

Unlocking the Charge‐Migration Mechanism in S‐Scheme Junction for Photoreduction of Diluted CO2 with High Selectivity

3D Fe-MOF embedded into 2D thin layer carbon nitride to construct 3D/2D S-scheme heterojunction for enhanced photoreduction of CO2

S-scheme heterojunction based on p-type ZnMn2O4 and n-type ZnO with improved photocatalytic CO2 reduction activity

One-pot Solvothermal Synthesis of Flower-Like Fe-doped In2S3/Fe3S4 S-scheme Hetero-Microspheres with Enhanced Interfacial Electric Field and Boosted Visible-Light-driven CO2 Reduction

Photothermal-boosted S-scheme Heterojunction of Α-Fe 2 O 3 @nio X for High-Selective Reduction of CO2 2 to CO

In2O3/Bi19Br3S27 S-scheme Heterojunction with Enhanced Photocatalytic CO2 Reduction

Enhanced CO2 Reduction Via S-Scheme Heterojunction of Amorphous/Crystalline Metal-free Carbon Nitride Photocatalysts

Bi 2 WO 6 /C 3 N 4 S-Scheme Heterojunction with a Built-In Electric Field for Photocatalytic CO 2 Reduction

Novel p- and n-type S-scheme heterojunction photocatalyst for boosted CO2 photoreduction activity

Direct Z-scheme Sn-In<sub>2</sub>O<sub>3</sub>/In<sub>2</sub>S<sub>3</sub> heterojunction nanostructures for enhanced photocatalytic CO<sub>2</sub> reduction activity

S‐scheme heterojunction of thin-layer O-modified graphitic carbon nitride/cobalt porphyrin to promote photocatalytic CO 2 conversion

Band structure modulated 2D/2D ZnIn2S4@amorphous polymeric g-C3N4 S-scheme heterojunction for efficient photocatalytic reduction of CO2

Facilitating charge separation by constructing CuInS2/PCN S-scheme heterojunction with the intimate contact interface for enhanced photocatalytic CO2 reduction

S-Scheme Heterojunction Photocatalysts for CO2 Reduction

A Band Structure Modulated 2D/2D ZnIn2S4@amorphous Polymeric G-C3n4 S-scheme Heterojunction for Efficient Photocatalytic Reduction of CO2

Z-scheme heterojunction enhanced photocatalytic performance for CO2 reduction to CH4

Construction of an In2O3/Bi2S3 Z-Scheme Heterojunction for Enhanced Photocatalytic CO2 Reduction