A Compact In-Band Full Duplexing Antenna with Quasi-Isotropic Radiation Pattern for IoT-Based Smart Home and Intravehicle Wireless Communication Applications

Yanyang Wang,Sen Yan
DOI: https://doi.org/10.1109/jiot.2022.3151691
IF: 10.6
2022-01-01
IEEE Internet of Things Journal
Abstract:An innovative planner in-band full duplexing antenna with quasi-isotropic radiation pattern is proposed for the first time in this article for Internet of Things (IoT)-based smart home and intravehicle wireless communication applications. The antenna consists of a radiating patch, a fence-strip resonator (FSR), and a ground plane with the same size as the radiating patch. The fence in the FSR located in the center plane of the patch has the function of simultaneously acting as a part of the resonator to improve the isolation between the transmitting port and the receiving port and as an electric current source for radiating a quasi-isotropic pattern. When the FSR resonates, a quasi-TEM field is formed mainly concentrated in the half of the antenna. The magnetic field generates surface electric current on the fence, and the electric field generates surface magnetic current on the open-ended aperture. The surface electric current and the surface magnetic current are not only orthogonal to each other but also have a phase difference of 90°. Theoretical analysis is provided to clarify the mechanism by which such a combination of radiation sources can generate a quasi-isotropic radiation pattern. To verify the proposed concepts, a high port isolation full duplexing antenna with quasi-isotropic radiation pattern is designed and fabricated, which has a compact size of $0.28\,\,\lambda _{0} \times 0.28 \lambda _{0}\times 0.042 {\lambda }_{0}$ ( ${\lambda }_{0}$ is the free space wavelength at 2.45 GHz). A measured isolation greater than 24 dB is achieved over the operating band from 2.42 to 2.50 GHz. The measurement results also show that the gain variation (GV) of port1 and port2 on the entire virtual radiation spherical surface is less than 6.88 and 6.74 dB, respectively.
What problem does this paper attempt to address?