Abstract:An innovative planner in-band full duplexing antenna with quasi-isotropic radiation pattern is proposed for the first time in this article for Internet of Things (IoT)-based smart home and intravehicle wireless communication applications. The antenna consists of a radiating patch, a fence-strip resonator (FSR), and a ground plane with the same size as the radiating patch. The fence in the FSR located in the center plane of the patch has the function of simultaneously acting as a part of the resonator to improve the isolation between the transmitting port and the receiving port and as an electric current source for radiating a quasi-isotropic pattern. When the FSR resonates, a quasi-TEM field is formed mainly concentrated in the half of the antenna. The magnetic field generates surface electric current on the fence, and the electric field generates surface magnetic current on the open-ended aperture. The surface electric current and the surface magnetic current are not only orthogonal to each other but also have a phase difference of 90°. Theoretical analysis is provided to clarify the mechanism by which such a combination of radiation sources can generate a quasi-isotropic radiation pattern. To verify the proposed concepts, a high port isolation full duplexing antenna with quasi-isotropic radiation pattern is designed and fabricated, which has a compact size of $0.28\,\,\lambda _{0} \times 0.28 \lambda _{0}\times 0.042 {\lambda }_{0}$ ( ${\lambda }_{0}$ is the free space wavelength at 2.45 GHz). A measured isolation greater than 24 dB is achieved over the operating band from 2.42 to 2.50 GHz. The measurement results also show that the gain variation (GV) of port1 and port2 on the entire virtual radiation spherical surface is less than 6.88 and 6.74 dB, respectively.

Compact In-Band Full Duplexing Antenna for Sub-6 GHz 5G Applications

A Dual-Band Antenna Array with High Gain and Miniaturized Structure

A Compact Cavity-backed Multiband Dual-polarized Antenna for 5G NR FR2 TN/NTN Mobile Communications

Design of a Compact Base Station Antenna for 5G N78-Band Application

Hybrid Metamaterial-TL-Based, Low-Profile, Dual-Polarized Omnidirectional Antenna for 5G Indoor Application

A lower profile base station antenna: With dual‐polarization and dual‐band for sub‐6 GHz application

A Broadband Wide-Angle Scanning Linear Array Antenna With Suppressed Mutual Coupling for 5G Sub-6G Applications

Dual-band Shared-aperture Microstrip Antenna Array for 4G/5G Applications

A Miniaturized Design of Shared-aperture Antenna with High Aperture Reuse Ratio for 5G Applications

A Compact Wideband Pattern Diversity Antenna for 5G-NR Applications

A Compact Tri-Band Filtering Antenna System for 5G Sub-6 GHz Applications

A compact dual‐band omnidirectional antenna with folded microstrip lines and slotlines for 5G applications

Dual-Polarized Broadband Base Station Antenna Backed with Dielectric Cavity for 5G Communications

A Compact In-Band Full Duplexing Antenna with Quasi-Isotropic Radiation Pattern for IoT-Based Smart Home and Intravehicle Wireless Communication Applications

A Dual-Band Dual-Polarized Base Station Antenna Using a Novel Feeding Structure for 5G Communications

Decoupling and Low-Profile Design of Dual-Band Dual-Polarized Base Station Antennas Using Frequency-Selective Surface

Dual-Band Structure Reused Aperture-Sharing Antenna With Low Sidelobe and High Gain for 5G Communication

Compact Shared Aperture Quasi-Yagi Antenna with Pattern Diversity for 5G-NR Applications

Isolation Enhancement Between Two Low-Profile Patch Antennas for In-Band Full-Duplex Applications

High-Isolated Antennas with Hybrid Decoupling Structures for Compact 5G UE Applications

A Compact C-Band Multiple-Input Multiple-Output Circular Microstrip Patch Antenna Array with Octagonal Slotted Ground Plane and Neutralization Line for Improved Port Isolation in 5G Handheld Devices