Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Generalized Modeling of Milling Dynamics for the 4DOF Machining System with Asymmetric Flexibility

Feed Direction-Dependent Milling Dynamics of an Asymmetric Flexible Machining System

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Integrated Modeling and Analysis of Ball Screw Feed System and Milling Process with Consideration of Multi-Excitation Effect

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Modeling of variable-pitch/helix milling system considering axially varying dynamics with cutter runout offset and tilt effects

Dynamic modelling and simulation of peripheral milling process

An Efficient Approach for Milling Dynamics Modeling and Analysis with Varying Time Delay and Cutter Runout Effect

Pose-Dependent Dynamic Modeling and Analysis of Bi-Rotary Milling Head

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

Milling Stability Prediction and Adaptive Chatter Suppression Considering Helix Angle and Bending

Modeling and Investigation of Spatial Operation Stiffness in Robotic Milling Process Considering Bidirectional Weak-Stiffness of Robot-Workpiece System

Multi-axis Coupling of Machining Centers Based on Electromechanical Modeling

Coupling modeling of thermal–dynamics–milling process for spindle system considering nonlinear characteristics

Research on the Multi-Physical Coupling Characteristics of the Machine Tool and Milling Process Based on the Systematically Integrated Model

Milling Stability Prediction of a Hybrid Machine Tool Considering Low-Frequency Dynamic Characteristics

Dynamics and Stability Prediction of Five-Axis Flat-End Milling

Dynamic modeling and nonlinear vibration analysis of spindle system during ball end milling process

Nonlinear dynamic modeling and vibration analysis of whole machine tool

Milling Chatter Control Based on Asymmetric Stiffness

Modeling and Optimization of Dynamic Performances of Large-Scale Lead Screws Whirl Milling with Multi-Point Variable Constraints