Abstract:Siloxanes are widely used in different applications: health care, dry cleaning, household products, paints and coatings, paper, personal care, for example. This explains their prevalence in the environment. Because of their volatile nature, most of the time they are dispersed in the atmosphere, but they can also be present in the slurry from landfills. During anaerobic digestion, when the temperature goes up to 60 degrees C, siloxanes are volatilized, forming part of the biogas. Operational problems using biogas to produce energy, heat and hydrogen have been identified. At high temperatures the siloxanes are transformed into silicate dioxide (commonly called sand transmission). These white deposits may adhere to metal or catalytic substrate surfaces, seriously reducing equipment efficiency, and this can be a reason for changing equipment warranties. Consequently, elimination of siloxanes has become very important. Unfortunately, relatively little information can be found on this subject. Nevertheless some authors have described different analytical methods for siloxane quantification, and recent studies have looked at the presence of siloxanes in landfills and the restriction on the energy recovery equipment using the biogas produced. The growing consumption of siloxanes and silicones in industrial processes consequently increase their prevalence in the environment, hampering the use of biogas as a source of 'green energy'. Therefore, the principal focus of this study is the treatment of siloxanes. Their elimination was carried out using an adsorption process with four different porous materials: activated carbon cloths (ACC), granular activated carbon (GAC), zeolite and silica gel. Two representative siloxane compounds were used in this study, hexamethyldisiloxane (L2) and octamethylcyclotetrasiloxane (D4). Adsorption kinetics and isotherms in batch reactors were performed. It was observed that the mass transfer into the porous material was more rapid for the activated carbon than for the zeolite and silica gel, congruent with the porous structure of the material. Moreover, it was found that D4 is more adsorbable than L2, due to possible interactions between the solid surface and the physical structure of the cyclic compound (D4). The influence of humidity and temperature were also studied. The increase in the temperature reduced the adsorption capacities. The influence of humidity on the adsorption was investigated under dry air and humid air at 70%. No significant difference in the adsorption capacities was found for the activated carbon and for the zeolite, but for the silica gel the mass transfer decreased considerably. For the adsorption isotherms, the maximal capacity of elimination was obtained with the activated carbon materials and was directly related to the porous structure. Thus activated carbon cloth was chosen to design the adsorption-desorption processes in a dynamic system. Thermal heating was used to achieve the regeneration process. Initial cycles have been accomplished and show the stability of the process.

Influence of Sampling Methods and Storage Condition on Volatile Methyl Siloxanes Quantification in Biogas

Topotecan versus treosulfan, an alkylating agent, in patients with epithelial ovarian cancer and relapse within 12 months following 1st-line platinum/paclitaxel chemotherapy. A prospectively randomized phase III trial by the Arbeitsgemeinschaft Gynaekologische Onkologie Ovarian Cancer Study Group (A

Quantitative Analysis of Main Components of Natural Gas Based on Raman Spectroscopy

[The Effect of Alkalinity of Methylation Reagent on Isomerization and Degradation of Polyunsaturated Fatty Acids with Pyrolysis Gas Chromatography].

Siloxane treatment by adsorption into porous materials

Dynamic release of siloxanes in the form of biogas from simulated municipal-solid-waste landfill and the corresponding driving mechanism

Volatilization of dimethylsilanediol (DMSD) under environmentally relevant conditions: Sampling method and impact of water and soil materials

Determination Of 67 Volatile Organic Compounds In Ambient Air Using Thermal Desorption-Gas Chromatography-Mass Spectrometry

Efficient reactive adsorption of hexamethyldisiloxane on MCM-41 supported sulfuric acid

PM2.5-bound Silicon-Containing Secondary Organic Aerosols (Si-Soa) in Beijing Ambient Air

Influence of Field Sampling Methods on Measuring Volatile Organic Compounds in a Swine Facility Using SUMMA Canisters

Unraveling the adsorption and diffusion properties of hexamethyldisiloxane on zeolites by static gravimetric analysis

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Effect of surfactant addition on the biofiltration of siloxane-contaminated gas streams

Ultra-fast polarity switching GC-IMS for the analysis of volatiles in biogas

Can low-temperature point discharge Be used as atomic emission source for sensitive determination of cyclic volatile methylsiloxanes?

Experimental, economic, and life cycle carbon footprint assessment of low‐cost adsorbents for siloxane removal from landfill gas

Typical Indoor Concentrations and Mass Flow of Cyclic Volatile Methylsiloxanes (cvmss) in Dalian, China.

Impacts of Sampling-Tube Loss on Quantitative Analysis of Gaseous Semi-Volatile Organic Compounds (svocs) Using an SPME-based Active Sampler.

Volatile Methyl Siloxanes and Other Organosilicon Compounds in Residential Air

Contaminants of emerging concern: Silylation procedures, evaluation of the stability of silyl derivatives and associated measurement uncertainty