Abstract:Accurate prediction of welding residual stresses is often challenging due to the complexity of the welding process which includes moving heat source, temperature-dependent material properties etc. Over the past two decades or so, the numerical simulation technologies have been widely used in the welding process and a number of numerical models have been proposed to predict temperature field and residual stresses field induce by welding process. In the previous numerical simulations, the weldment was either in Free State or rigidly constrained. Such manipulations can not reflect the realistic constraint conditions of the weldment. In this simulation, clamps and backing board are all included in the model as elastic body and analytical rigid body, respectively. In the thermal analysis, the thermolysis of clamps and backing board can be equivalent to forced convection heat transfer, where the coefficients of forced convection heat transfer are temperature dependent; in the mechanical analysis, both the contact interaction between clamps and weldment and the contact interaction between backing board and weldment are considered, normal and tangent contact interaction properties are assumed as "HARD" contact and Coulomb friction, respectively. After welding process, residual compressive plastic strains existing in the weld zone and HAZ are the sources of residual stresses. Post welding cold rolling is an effective and convenient method to reduce residual compressive plastic strains induces by welding especially for thin-walled structure. In the previous researches, either welding process and cold rolling process were treated as two separate processes or only the residual stresses induced by welding process was considered as initial condition in the cold rolling process. In this simulation, welding residual stresses, plastic strains and deformations are all imported as the initial state of the cold rolling process to increase the accuracy of the numerical simulation. The import of plastic strains will affect the accuracy of the numerical simulation for the material which has obvious work harden effect.

Study on the Mathematical Model Related to the Connection Properties of Cold Pressing Joining Technology

Numerical modelling of lockbolted lap connections for aluminium alloy plates

Experiments and mechanical behaviour of anchorage joints for steel cables

Research on Mathematical Model of Anti-twist Braided Wire Rope

Mathematical model for the tensile strength of the crimping assembly of aviation wiring harness end

A Three Dimensional Approach to Model Steel Wire Ropes Used in High Energy Absorber Apparatus

Mechanical analysis of a type of wire rope subjected to tension

Connection Form of Bearing Structure for Heavy Hydraulic Equipment

Comparison between mechanical behaviors of wire ropes with distinct contact modes based on the finite element method

Calibration and Analysis of Mechanical Modeling for Traction Wire Rope of Mountainous Orchard Carrier

Numerical and Experimental Research on the Bearing Characteristics and Failure Mechanism of Zinc-Cast Socket Termination for Wire Rope. Part 1: Methodology and Theory

Mesoscopic Tensile Deformation of Steel Cord with Diverse Layered Nonuniformity Based on Microcomputed Tomography Optimizing Simulation Model

Comparison of reduction ability between multi-stage cold drawing and rolling of stainless steel wire – Experimental and numerical investigations of damage

Analysis of Rolling Force Model in Cold Rolling Mill

Equivalent characterization of pre-strained material properties and mechanical behavior prediction of steel/aluminum self-piercing riveted joints

Numerical Simulation of NbTi Superconducting Joint with Cold-Pressing Welding Technology

Parametric modeling and finite element analysis of triangular strand wire rope

Influence of Sheet Thickness on Mechanical Clinch–compress Joining Technology

A Simple Calibrated Ductile Fracture Model and Its Application in Failure Analysis of Steel Connections

High precision modeling of welding and post welding cold rolling continuous process in numerical simulation

Local Bond Stress-Slip Model of High-Strength Stainless Steel Wire Ropes in ECC