Abstract:The attractiveness of direct water injection advantages has made a comeback in the minds of designers due to the potential knock mitigation and lower NO x emissions. The current work established and validated an appropriate 3D model for hydrogen-enriched Wankel engines with direct water injection, and the used CFD simulation was mainly a consideration of combustion and flow phenomena inside the engine and securing the gained knowledge. The determinations of the knock operation and position were investigated, and the intrinsic mechanism of end-gas auto-ignition was clarified. Then, the effects of water injection strategies on knock mitigation and NO x reduction were analyzed in detail. Results showed that the end-gas auto-ignition caused the drastic variation of the local velocity field and the severe pressure oscillation in the vicinity of these regions, which led to knocking combustion. The highest knock propensity occurred at the trailing part of the recess, especially on the opposite side of the intake port. The pressure oscillation of water-enriched schemes was smaller than water-free schemes, and the knock intensity gradually decreased with the advance of water injection timing. When the injection timing was 250°EA, the propensity of end-gas auto-ignition was weakened obviously due to the reduced local temperature and pressure within the rotor chamber, and NO x formation was lower than the other schemes. The local pressure fluctuation was decreased by increasing water addition, whose maximum decrement occurred at the trailing part of the recess. The knock intensity gradually decreased as the amount of water injection increased. When the water injection ratio of 40%, there was no obvious auto-ignition occurrence, and NO x formation reduced significantly at the exhaust moment, which confirmed direct water injection was one of the most promising and effective methods to control knock propensity and NO x emissions simultaneously. In addition, the water droplets of a smaller water injection ratio (10%) scheme spread faster than the water-free scheme after spontaneous combustion, which could reach the fuel surface to present azeotropic phenomena and then enhance the combustion. This result shall give insights into the feasibility of a proper water addition for improving the thermal efficiency of the Wankel engine regime.

Experimentally Investigating the Asynchronous Ignition on a Hydrogen-Fueled Wankel Rotary Engine

Comparatively investigating the leading and trailing spark plug on the hydrogen rotary engine

Assessment of spark-energy allocation and ignition environment on lean combustion in a twin-plug Wankel engine

Assessment of the application of oxygen enrichment in the hydrogen-fueled Wankel rotary engine

Effect of excess air ratio and ignition timing on the combustion and emission characteristics of the ammonia-hydrogen Wankel rotary engine

Analyzing characteristics of knock in a hydrogen-fueled Wankel rotary engine

The optimization of leading spark plug location and its influences on combustion and leakage in a hydrogen-fueled Wankel rotary engine

Modeling and parametric study of the performance-emissions trade-off of a hydrogen Wankel rotary engine

Comparison of combustion, emission and abnormal combustion of hydrogen-fueled Wankel rotary engine and reciprocating piston engine

Discussion on the potential of methane-hydrogen dual-fueled Wankel rotary engine

Exploring the coupling mechanism between piston structure and turbulent jet ignition mode in hydrogen mixed natural gas rotary engines

An Experimental and Numerical Study of a Hydrogen Fueled, Directly Injected, Heavy Duty Engine at Knock-Limited Conditions

In-Cylinder Flow Characterization of a Hydrogen-Ammonia Fueled Rotary Engine

Investigation of intake closing timing on the flow field and combustion process in a small-scaled Wankel rotary engine under various engine speeds designed for the UAV application

An insight into direct water injection applied on the hydrogen-enriched rotary engine

Combined experimental-numerical analysis of hydrogen as a combustion enhancer applied to wankel engine

Effects of hydrogen injection strategies on the flow field and combustion characteristics in a hydrogen-fueled rotary engine with the swirl chamber

Effect of Hydrogen Addition on Combustion and Emissions Performance of a Gasoline Rotary Engine at Part Load and Stoichiometric Conditions

Effect of In-Cylinder Low-Pressure Direct Injection Strategy on the Atomization and Combustion Process of a Small-Scaled Gasoline Wankel Rotary Engine

Three-dimensional numerical simulations on the effect of ignition timing on combustion characteristics, nitrogen oxides emissions, and energy loss of a hydrogen fuelled opposed rotary piston engine over wide open throttle conditions

Parametric analysis of hydrogen two-stage direct-injection on combustion characteristics, knock propensity, and emissions formation in a rotary engine