Abstract:In order to develop a portable, autonomous power generation system with a magnitude improvement in energy density over alkaline or lithium-ion batteries, the liquid hydrocarbons fueled small-scale rotary (Wankel-type) internal combustion engines project is directed toward the development of a practical small-scale power generator. Micro combustion and seal are two of the most prominent questions of the design of small-scale rotary engine. As a result, the mathematical model of the micro combustion is proposed and some simulations are implemented. In addition, a combustion experiment is made in a micro combustion vessel to confirm the lower limit of the combustor size and quench distance. Based on an epitrochoidal-shaped housing the small-scale rotary engine is designed. For its planar construction, the rotary engine is available to the MEMS manufacturing techniques such as DRIE, LIGA, DEM, EDM, and is also suitable for micromation. While in the experiment, it is founded that with the housing of the engine with epitrochoidal-shape expanding, the engine couldn’t work steadily. Thus the analysis and simulation of heat transfer and thermal-stress are made to modify the contour of the epitrochoidal-shaped housing. Besides, the single-rotor construction, oil film face seals, and springs apex seals are adopted in the design. A series of small-scale rotary engines (including M2.4, M1.5 and M0.75 rotary engine) have been designed and fabricated from steel by using electro discharge machining (EDM). Test platforms for small-scale rotary engines have been developed and experiments have been conducted respectively, in which liquid hydrocarbons fueled small-scale rotary engines and high-pressure air driven small scale rotary engines to examine the effects of sealing, ignition, design, and thermal management on efficiency. The preliminary test of the M2.4 rotary engine (compressed chambers is 166 mm3, swept displacements is 2600 mm3) fueled by liquid hydrocarbons has shown steady 150 W net power output at 15000 RPM. The preliminary test of the M0.75 rotary engine (compressed chambers is 9 mm3, swept displacements is 143 mm3) can output 1.5W net power at 14000 RPM with high-pressure-air driven. Testing of the small-scale rotary engine has verified the feasibility of the micro-engine. However, heat loss and sealing issues are the key points for efficient operation of the micro-engine, and they must be taken into account in its design and fabrication to improve the design of sealing and micro combustion chamber.

Discussion on the potential of methane-hydrogen dual-fueled Wankel rotary engine

Performance analysis of the ammonia-enriched hydrogen-fueled Wankel rotary engine

Comparison of combustion, emission and abnormal combustion of hydrogen-fueled Wankel rotary engine and reciprocating piston engine

Research on the behavior of CO2 on hydrogen-fueled Wankel rotary engine performance

Modeling and parametric study of the performance-emissions trade-off of a hydrogen Wankel rotary engine

Effect of excess air ratio and ignition timing on the combustion and emission characteristics of the ammonia-hydrogen Wankel rotary engine

Assessment of the application of oxygen enrichment in the hydrogen-fueled Wankel rotary engine

A review: Centurial progress and development of Wankel rotary engine

The optimization of leading spark plug location and its influences on combustion and leakage in a hydrogen-fueled Wankel rotary engine

Enhancing the Efficiency of Rotary Thermal Propulsion Systems

Multi-objective optimization of a hydrogen-fueled Wankel rotary engine based on machine learning and genetic algorithm

Combined experimental-numerical analysis of hydrogen as a combustion enhancer applied to wankel engine

Analyzing characteristics of knock in a hydrogen-fueled Wankel rotary engine

Hydrogen Enriched Ammonia Engines: Assessment of Hydrogen Concentration in the Fuel Feed from the Laminar Flame Speed Viewpoint

Assessment of spark-energy allocation and ignition environment on lean combustion in a twin-plug Wankel engine

Comparatively investigating the leading and trailing spark plug on the hydrogen rotary engine

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Multi-objective optimization of a compression ignition engine using on-board methanol reforming

Numeral study of the mixture formation and combustion process of an ammonia/hydrogen rotary engine

Combined Effect of Air Intake Method and Hydrogen Injection Timing on Airflow Movement and Mixture Formation in a hydrogen direct injection rotary engine

Design and Test of Small-Scale Rotary Engine Power System