Abstract:Mask Projection micro-Stereolithography (MPμSL) is an additive manufacturing technique capable of producing solid parts with micron-scale resolution from a vat of photocurable liquid polymer resin. Although the physical mechanism remains the same, the process differs from traditional laser-galvanometer based stereolithography (SL) in its use of a dynamic mask UV projector, or digital light processor (DLP), which cures each location within each 3D layer at the same time. One area where MPµSL has garnered considerable attention is in the field of microfluidics and Lab-on-a-Chip, where complex multistep microfabrication techniques adopted from the semiconductor industry are still widely used, and where MPµSL offers the ability to fabricate completely encapsulated fluidic channels in a single step and at low cost [1–3]. However, a significant obstacle exists in the prevention of channel blockage due to overcuring of the polymer resin [4, 5]. Overcuring can be attributed to the so-called ‘back side effect’ [2] which occurs during the build process as light from successive layers penetrates into the resin to a depth greater than the layer thickness. This effect is most prevalent in channels or features oriented horizontally (in a parallel plane to that of the build platform). Currently there are two main approaches in controlling the cure depth; 1. the chemical approach, which involves doping the resin material with a chemical light absorber [6–8]; and 2. by improving the system's hardware and optical elements to improve the homogeneity of the light dosage and control the cure depth [9]. Here we investigate a third approach through modification of the 3D CAD file prior to printing to mitigate for UV light leakage from successive build layers. Although used here in conjunction with the MPμSL technique, this approach can be applied to a range of SL techniques to improve printer resolution and enable production of internal features with higher dimensional accuracy.

Characterization of Drying Techniques for Micro-Stereolithography

Stiction Problems in Releasing of 3d Microstructures and Its Solution

Adhesion Force of Polymeric Three-Dimensional Microstructures Fabricated by Microstereolithography

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

An Accurate Thermomechanical Model for Laser-Driven Microtransfer Printing

Projection Micro-Stereolithography Using Digital Micro-Mirror Dynamic Mask

Mitigation and control of the overcuring effect in mask projection micro-stereolithography

Effect of Constrained Surface Texturing on Separation Force in Projection Stereolithography

Ultrasonic plasticization micro-injection molding technology: characterization of replication fidelity and wettability of high-depth microstructure

Relationship between the adhesion properties of UV-curable alumina suspensions and the functionalities and structures of UV-curable acrylate monomers for DLP-based ceramic stereolithography

Effect of Light Attenuation on Polymerization of Ceramic Suspensions for Stereolithography

Rotation-Assisted Separation Model of Constrained-Surface Stereolithography.

Supportability of a High-Yield-Stress Slurry in a New Stereolithography-Based Ceramic Fabrication Process

Characterization of Stereolithography Printed Soft Tooling for Micro Injection Molding

Multi-scale Analysis Approach for SU-8 in Ultraviolet Nanoimprint Lithography Demolding Process

Volume Shrinkage and Conversion Rate of Al2O3 Ceramic Stereolithography Suspension Polymerised by Ultraviolet Light

A novel antistiction method using harmonic excitation on the microstructure

Optimization of Solidification Process Parameters in Micro Stereo Lithography

Fast Mask Image Projection-Based Micro-Stereolithography Process for Complex Geometry

Experimental and Simulation Investigations on the Morphology of Aerosol Jet Printed Polymer Traces under In-Situ UV and Thermal Curing Conditions

Materials Characterization of Stereolithography 3D Printed Polymer to Develop a Self-Driven Microfluidic Device for Bioanalytical Applications