Abstract:The current research of hydrodynamic bearing in blood pump mainly focuses on the bearing structure design.Compared with the typical plane slider bearing and Rayleigh step bearing,spiral groove bearing has excellent performance in load-carrying capacity.However,the load-carrying capacity would decrease significantly with increasing flow rate in conventional designs.In this paper,the special treatment is made to the upper spiral groove bearing to make sure that both the circulatory flowing and load-carrying capacity are high.Three-dimensional computational fluid dynamics（CFD） models in the space between rotor and shaft are developed by using FLUENT software.Effects of groove number,film height and groove depth on load-carrying capacity of the spiral groove bearings are investigated by orthogonal experiment design.The experimental results show that film height is the most remarkable factor to the load-carrying capacity.The variation tendency of load-carrying capacity reveals that the best combination of geometry is the one with groove number of 8,film height 0.03 mm and groove depth 0.08 mm.The velocity and pressure distributions in spiral groove bearings are also analyzed,and the analysis result shows that the distributions are in conformity with the design of the blood pump based on the principle of hydrodynamic bearing.The displacement of the rotor with the best combination parameters is tested by using laser displacement sensors,the testing result shows that the suspending performance is satisfactory both in axial and radial directions.This research proposes a bearing design method which has sufficient load-carrying capacity to support rotor as an effective passive hydrodynamic bearing.

Peer-reviewed paper

Dynamic Characteristics of Hard Disk Drive Spindles Supported by Hydrodynamic Bearings

Design on Hybrid Ceramic Bearing Based on Water Based Fluid with Controllable Viscosity

PRESENT SITUATION AND DEVELOPING TREND OF HARD DISK SPINDLES

Study on Rotor-Bearing Dynamic Performance of a Novel Motorized Spindle Supported by Water-Lubricated Hydrodynamic Spiral Grooved Bearings

Design and Optimization of the Surface Texture at the Hydrostatic Bearing and the Spindle for High Precision Machining

Microtribology of Hard Disk Drive for High Density Recording

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Design and application on experimental platform for high-speed bearing with grease lubrication

Numerical Simulation and Experimental Research on Passive Hydrodynamic Bearing in a Blood Pump

Review on Lubrication and Sealing Technology of High-Speed Motorized Spindle

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Thermal Characteristics Analysis of the Spindle System of Heavy Duty Horizontal Lathe

Simulation and Experimental on Thermal Behavior of Hydrostatic Thrust Bearing Based on Superhydrophobic/oleophobic Surface

The Research Status and Progress of Heavy/Large Hydrostatic Thrust Bearing

Coupling Study on Quasi-Static and Mixed Thermal Elastohydrodynamic Lubrication Behavior of Precision High-Speed Machine Spindle Bearing with Spinning

A flyability and durability dilemma in hard disk drives

Performances of Lubricants in Hard Disk and Their Influences on Dynamic Characteristics of Magnetic Recording System

Superlubricity relevant in hard disk drive applications

Analysis of Oil-Air Two-Phase Flow Characteristics inside a Ball Bearing with Under-Race Lubrication

A Molecular Dynamics Study on Lubricant Perfluoropolyether in Hard Disk Driver