Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

Preparation of Ni2P/TiO2−Al2O3 and the Catalytic Performance for Hydrodesulfurization of 3-Methylthiophene

Preparation of Ni<sub>2</sub>P/TiO<sub>2</sub>−Al<sub>2</sub>O<sub>3</sub>and the Catalytic Performance for Hydrodesulfurization of 3-Methylthiophene

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Ni<sub>2</sub>P Catalysts Supported on Titania-Modified Alumina for the Hydrodesulfurization of Dibenzothiophene

Ni 2P catalysts supported on titania-modified alumina for the hydrodesulfurization of dibenzothiophene

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Support Effects on Thiophene Hydrodesulfurization over Co-Mo-Ni/Al2O3 and Co-Mo-Ni/TiO2-Al2O3 Catalysts

Effect of Supports on the Supported Ni2P Catalysts Prepared by the Phosphidation Using Triphenylphosphine in Liquid Phase

Effect of TiO2-Al2O3 support surface properties on active phase structure and hydrodenitrogenation performances of the corresponding NiWS supported catalysts

Study on the preparation of TiO2-Al2 O3 composite support and its application in Co-Mo/TiO2-Al2 O3 catalyst for hydro-desulfurization

Synthesis of mesoporous TiO2-Al2O3 composites supported NiW hydrotreating catalysts and their superior catalytic performance for heavy oil hydrodenitrogenation

Efficient Ni2P /Al2O3 hydrodesulfurization catalysts from surface hybridization of Al2O3 particles with graphite-like carbon

Thiophene hydrodesulfurization activities and microstructure of sulfided NiW/γ-Al2O3 catalysts

Hierarchically Macro-Mesoporous Ni-Mo/Al2O3 Catalysts for Hydrodesulfurization of Dibenzothiophene

Preparation of Highly Dispersed Nickel Phosphide Catalyst Supported on Nano-Sized Y Zeolite and Its Hydrodesulfurization Performance

Catalytic Oxidative Desulfurization of Dibenzothiophene by Composites Based Ni/Al-Oxide

Hierarchically Macro-/Mesoporous Structured Co–Mo–Ni/γ-Al2O3 Catalyst for the Hydrodesulfurization of Thiophene

The tuning of TiO2-Al2O3 composite support for the fabrication of PtSn-based catalysts with superior catalytic performance in the propane dehydrogenation

The evolution of NiMo unsupported catalysts with 3DOM structure for thiophene hydrodesulfurization

Synthesis and Characterization of NiMoS/TiMg and NiWS/TiMg Nanocatalysts and Their Application in the Hydrodesulfurization of Dibenzothiophene