Abstract:Recently, there has been an increasing demand for the utilization of hybrid basalt/glass fiber epoxy composites with nanofillers in various structural applications. These materials have become increasingly popular because of their outstanding qualities, such as their impressive strength-to-weight ratio, improved stiffness, resistance to corrosion and chemicals, and environmentally friendly properties. This study aims to examine the morphological, mechanical, and dynamic mechanical performances of basalt/E-glass fiber-reinforced epoxy infused with equal proportions of Multiwalled Carbon Nano Tubes (MWCNTs) and Silicon dioxide (SiO 2 ) nanoparticles at varying weight percentages (0, 1, 2, and 3) according to ASTM standards. The composite laminates were fabricated using a manual lay-up method and compression molding. A novel stacking sequence of fibers 0 1 B /0 2 G /0 2 B /0 2 G /0 2 B /0 2 G /0 1 B , comprising 12 layers, was employed. The tensile strength, tensile modulus, Inter-Laminar Shear Strength (ILSS), and glass transition temperature (T g ) of BG3 (2%) composite specimen were increased from 247 to 308 MPa, 19.89GPa to 24.60GPa, 23.8 MPa to 40 MPa, and 73 0 C to 90 0 C respectively. The results demonstrate notable enhancements in tensile strength, tensile modulus, ILSS, and Tg of 2wt. % MWCNTs + SiO 2 filled BG3 (2%) composite compared to the unfilled composite by 20%, 20%, 41%, and 18%, respectively. The addition of MWCNTs + SiO 2 nanofillers in composites resulted in a significant enhancement of mechanical and dynamic mechanical performances compared to the unfilled composite. It is concluded that the addition of a minimal amount of MWCNTs and SiO2 to the matrix results in significantly improved performance compared to the unfilled composite.

Preparation and Mechanical Properties of C_(sf)/BAS Glass Ceramic Matrix Composites

Microstructures and mechanical properties of B4C‐SiC and B4C‐SiC‐TiB2 ceramic composites fabricated by hot pressing

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Effect of Fiber Type on Mechanical Properties of Short Carbon Fiber Reinforced B4C Composites

High-performance B4C matrix composites fabricated from the B4C–Si–CeO2 system via reactive hot pressing

Mechanical Properties and Microstructure of Calcium Sulfate Whisker-Reinforced Cement-Based Composites

Mechanical Properties and Microstructure of Hot-Pressed Silica Matrix Composites

In Situ Preparation and Mechanical Properties of (ZrB2+ZrC)/Zr3[Al(Si)]4C6 Composites

Effect of B4C particle size and TiB2 content on the mechanical properties of B4C composites and their dynamic mechanical properties

Mechanical properties and microstructure of basalt fiber-biobased- basic magnesium sulfate cement

Hot-press sintering studies of sol-gel-prepared composite powders: A novel preparation method to improve mechanical properties of BN-BAS composite ceramics

Fabrication of electrically conductive barium aluminum silicate/silicon nitride composites with enhanced strength and toughness

Microstructural and thermal stress effects on mechanical properties of boron carbide particle‐reinforced silicon carbide

Improving mechanical and thermal expansion properties of aluminum matrix composites reinforced by silicon carbide fiber

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Modulating the microstructure and mechanical properties of β-Ti-reinforced bulk metallic glass composites by carbon addition

Evaluation of mechanical, morphological, and dynamic mechanical properties on basalt/E-glass fiber/epoxy modified with MWCNTs + SiO2 hybrid nanocomposites

B4C-SiC skeleton reinforced graphite composites with excellent mechanical properties

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Microstructure and Mechanical Properties of Al–B 4 C Composite at Elevated Temperature Strengthened with in Situ Al 2 O 3 Network