Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

The Experiment on Ascertaining the Burning Degree of the Concrete Components

Experiment Study on Ascertaining the Burning Degree of the Concrete Components

Fire Resistance and Bending Bearing Capacity of Fire-Resistant Steel-Concrete Composite Beams

Post-Earthquake Fire Resistance and Residual Seismic Capacity of Reinforced Concrete Columns

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

Experimental Study on the Mechanical Properties of Reinforced Concrete Columns after Exposure to Fire

Infrared Thermal Image Method and Ultrasonic Rebound Method in Assessing Fire-Damaged Concrete

Fire Safety of Long Tunnel Asphalt Concrete Pavement

A Study on Asphalt Mixture under Combustion

Study on the Prediction of Residual Life of Concrete Rectangular Beams after Fire

ESTIMATION OF THE RESIDUAL STIFFNESSES OF FIRE-DAMAGED CONCRETER MEMBERS

Experimental investigation on the effect of natural fire exposure on the post‐fire behavior of reinforced concrete beams using electric radiant panel

Effect of fire on concrete and concrete structures

Preliminary Research on Mechanical Behavior of Composite Frame with Concrete-filled Steel Tubular Columns after Exposure to Overall Stage of Fire

Experimental Research and ANSYS Analysis of Temperature Field of Concrete Specimens Reinforced by Paste Method in the Fire

ESTIMATION OF THE TEMPERATURE DISTRIBUTION IN CONCRETER STRUCTURES AFTER FIRE BY STATIC PARAMETER IDENTIFICATION

Fire performance of composite columns made of high strength steel and concrete

Experimental investigation on fire resistance of high-strength concrete encased steel composite columns

Performance of Concrete Structure after Fire Disaster Based on Thermal Stress Coupling Field Analysis

Experimental Study on the Structural Performance of Reinforced Truss Concrete Composite Slabs during and after Fire

Tests on the Steel–Concrete Bond Strength in Steel Reinforced Concrete (SRC) Columns after Fire Exposure