Abstract:To treat dyeing and printing industrial wastewater with zero liquid discharge, developing a straightforward technique for fabricating membranes with sufficient alkaline and salt resistance is crucial. This study presents a facile n-hexane post-treatment method to enhance the ability of polysulfone (PSf) membranes to fractionate textile wastewater. The optimal membrane exhibits minimal salt rejections, with only 5.1 % for NaCl and 9.8 % for Na2SO4. Additionally, it demonstrates exceptional dye rejection rates, reaching 99.87 % for Direct Red 23 and 99.81 % for Congo Red while maintaining high-water permeance (∼52 L m−2h−1 bar−1) at the alkaline environment (pH = 13) and high salt (30 g/L). Furthermore, a combined diafiltration process was devised for the separation of a mixture containing Congo Red and Na2SO4. This process achieved an impressive desalination efficiency of 98 % while ensuring a remarkable dye recovery of 99.8 %. The outstanding performance can be attributed to the favorable solvency capability of n-hexane, which was determined based on the analysis of Hansen solubility parameters. Through a two-minute solvent treatment of PSf membranes, the flexibility of the polymer chains within the membranes was enhanced, leading to a denser structural arrangement. This arrangement resulted in the formation of highly selective membranes. The extent of densification is influenced by several factors, such as solvent type, immersion duration, and polymer concentrations. These variables directly affect the level of solvation and chain rearrangement that occurs during the process. This study underscores the potential significance of solvent treatment as a post-treatment step in membrane fabrication, demonstrating its utility as a tool for fine-tuning separation performance in applications that involve dye/salt mixtures, and highlighting its importance in the field of membrane technology.

Silicate and Silicone Removal by Pretreatment to Prevent Membrane Fouling in Garment Washing Wastewater Treatment

Treatment and Recycling of Garment Washing Wastewater

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Pretreatment for alleviation of RO membrane fouling in dyeing wastewater reclamation

Mitigation of reverse osmosis membrane fouling by coagulation pretreatment to remove silica and transparent exopolymer particles

Modification of polyethersulfone membranes by Polyethyleneimine (PEI) grafted Silica nanoparticles and their application for textile wastewater treatment

Improvement of Coagulation and Membrane Filtration Performance in Hybrid Coagulation-UF-RO System for Chemical Mechanical Polishing Wastewater Treatment: Effect of Coagulants

Facile post-treatment of PSf membranes with hexane for fractionation and concentration of alkaline textile wastewater

Efficient removal of anionic, cationic textile dyes and salt mixture using a novel CS/MIL-100 (Fe) based nanofiltration membrane

Ultrasonic irradiation control of silica fouling during membrane distillation process

Titanium Coagulation Simplified Removal Procedure and Alleviated Membrane Fouling in Treatment of Antimony-Containing Wastewater

Characterization and Mitigation of the Fouling of Flat-Sheet Ceramic Membranes for Direct Filtration of the Coagulated Domestic Wastewater

Treatment of semiconductor-industry wastewater with the application of ceramic membrane and polymeric membrane

Analysis of Membrane Fouling Genesis in Nanofiltration Process .for Advanced Treatment of Dyeing and Finishing Wastewater

Coupling Ferrate Pretreatment and In-Situ Ozonation/ceramic Membrane Filtration for Wastewater Reclamation: Water Quality and Membrane Fouling

Effect of Integrated Pretreatment Technologies on RO Membrane Fouling for Treating Textile Secondary Effluent: Laboratory and Pilot-Scale Experiments

Treatment of Phosphate-Containing Oily Wastewater by Coagulation and Microfiltration

Tuning the microstructure of SMA / CPVC membrane for enhanced separation performance by adjusting the coagulation bath temperature

Performance of different pretreatment methods on alleviating reverse osmosis membrane fouling caused by soluble microbial products

Ferrous Iron/peroxymonosulfate Oxidation As a Pretreatment for Ceramic Ultrafiltration Membrane: Control of Natural Organic Matter Fouling and Degradation of Atrazine.