Abstract:Heavy metal pollution is one of the main problems in water pollution, which is harmful to humans. Surface-enhanced laser-induced breakdown spectroscopy (SENLIBS) has been applied to detect trace amounts of heavy metal elements in aqueous solution; however, it is still a big challenge to explore the relationship between the LIBS detection sensitivity and the substrate's physical properties. In this work, four typical substrates, zinc (Zn), magnesium alloy (Mg), nickel (Ni), and silicon (Si), were compared; and the mechanism of spectral enhancement by different substrates in SENLIBS was investigated. The results indicated that the limit of detection (LoD) of heavy metal elements on different substrates is positively proportional to the boiling of the substrate. That is mainly because a higher plasma excitation temperature and electron density are obtained, leading to more intense collision between particles. The signal enhancement is associated with the lower boiling point of the substrate (corresponding to a lower ablation threshold and higher ablation quantity from the substrate). As a result, the best LoD was 0.0011 mg/L for chromium (Cr) and 0.004 mg/L for lead (Pb) on an optimal Zn substrate, respectively. The LoDs were sufficiently low to meet the drinking water sanitation standard. These results showed that the detection sensitivity of heavy metal elements in aqueous solution can be improved by choosing a substrate with a lower boiling point in SENLIBS.

LIBS Detection Characteristics of Trace Heavy Metal in Different Buffer Gases

Experimental Study on Mercury Content in Flue Gas of Coal-Fired Units Based on Laser-Induced Breakdown Spectroscopy

Study of Electrochemical Sensor for Trace Heavy Metals Detection in Aqueous Solutions

Quantitative Analysis of Heavy Metals in Water Based on Libs with an Automatic Device for Sample Preparation

Sensitive Measurement of Trace Mercury Using Low Pressure Laser-Induced Plasma

Determination of Trace Heavy Metal Elements in Aqueous Solution Using Surface-Enhanced Laser-Induced Breakdown Spectroscopy

Using LIBS for Heavy Metal Detection in Water Combined with Graphite Enrichment and Spatial Confinement

Effects of Laser Wavelength on Measurement of Trace Elements in Gas Using LIBS

Study on Detection Sensitivity of Heavy Metal in Water Based on LIBS Combined with Electrode Enrichment Method.

Application of LIBS Technology to the Rapid Measure of Heavy Metal Contamination in Soils

Research progress on the application of laser-induced breakdown spectroscopy in metal element detection

Heavy Metal Detection in Soils by Laser Induced Breakdown Spectroscopy Using Hemispherical Spatial Confinement

Detection of heavy metals in water sample by laser-induced breakdown spectroscopy combined with annular groove graphite flake

Improvement of LIBS Accuracy in Detecting Pb in Pork by Physical Pretreatment of Samples

High-sensitivity analysis of trace elements in water using femtosecond LIBS with dry droplet pretreatment on a metallic substrate

Influence of Water Content on the Detection of Sensitivity of Pb in Potatoes by LIBS

Quantitative Analysis of Heavy Metals in Water with Libs Based on Signal-To-Background Ratio

On-line Quantitative Analysis of Heavy Metals in Water Based on Laser-Induced Breakdown Spectroscopy

Continuous Online Detection Method Of Heavy Metals In Water Based On Libs Technology

Research of LIBS method for detection of heavy metals in polluted soil

Sensitivity, precision, and accuracy of fs-LIBS for heavy metal detection in flowing aqueous solutions