Abstract:Heavy metal pollution is one of the main problems in water pollution, which is harmful to humans. Surface-enhanced laser-induced breakdown spectroscopy (SENLIBS) has been applied to detect trace amounts of heavy metal elements in aqueous solution; however, it is still a big challenge to explore the relationship between the LIBS detection sensitivity and the substrate's physical properties. In this work, four typical substrates, zinc (Zn), magnesium alloy (Mg), nickel (Ni), and silicon (Si), were compared; and the mechanism of spectral enhancement by different substrates in SENLIBS was investigated. The results indicated that the limit of detection (LoD) of heavy metal elements on different substrates is positively proportional to the boiling of the substrate. That is mainly because a higher plasma excitation temperature and electron density are obtained, leading to more intense collision between particles. The signal enhancement is associated with the lower boiling point of the substrate (corresponding to a lower ablation threshold and higher ablation quantity from the substrate). As a result, the best LoD was 0.0011 mg/L for chromium (Cr) and 0.004 mg/L for lead (Pb) on an optimal Zn substrate, respectively. The LoDs were sufficiently low to meet the drinking water sanitation standard. These results showed that the detection sensitivity of heavy metal elements in aqueous solution can be improved by choosing a substrate with a lower boiling point in SENLIBS.

On-line Quantitative Analysis of Heavy Metals in Water Based on Laser-Induced Breakdown Spectroscopy

Quantitative Analysis of Cadmium and Zinc in Algae Using Laser-Induced Breakdown Spectroscopy

An Automated Electronic Tongue for In-Situ Quick Monitoring of Trace Heavy Metals in Water Environment

Full Automatic Monitor for In-Situ Measurements of Trace Heavy Metals in Aqueous Environment

Automatic Monitoring Electronic Tongue with Meas for Environmental Analysis

Study on rapid detection method of water heavy metals by laser-induced breakdown spectroscopy coupled with liquid-solid conversion and morphological constraints

Electronic Tongue Analysis System for Detection of Heavy Metal

Research progress on the application of laser-induced breakdown spectroscopy in metal element detection

Histochemical examination of ectopic bone formation induced in rat bone marrow

Application of LIBS Technology to the Rapid Measure of Heavy Metal Contamination in Soils

Determination of Trace Heavy Metal Elements in Aqueous Solution Using Surface-Enhanced Laser-Induced Breakdown Spectroscopy

Heavy Metal Detection in Soils by Laser Induced Breakdown Spectroscopy Using Hemispherical Spatial Confinement

Highly Sensitive Detection of Heavy Metal Elements Using Laser-Induced Breakdown Spectroscopy Coupled with Chelating Resin Enrichment

Research of LIBS method for detection of heavy metals in polluted soil

The pH effect on the detection of heavy metals in wastewater by laser-induced breakdown spectroscopy coupled with a phase transformation method

Multi-element Analysis of Heavy Metal Content in Soils Using Laser-Induced Breakdown Spectroscopy: A Case Study in Eastern China

Enhanced Laser-Induced Breakdown Spectroscopy for Heavy Metal Detection in Agriculture: A Review

Robust Remote Sensing of Trace-Level Heavy-Metal Contaminants in Water Using Laser Filaments.

Agarose Film-Based Liquid–Solid Conversion for Heavy Metal Detection of Water Samples by Laser-Induced Breakdown Spectroscopy

Rapid Detection Of Heavy Metals On Waste-Water Polluted Soils Using Laser Induced Breakdown Spectroscopy

Improvement of Analytical Sensitivity on Detecting Cd Residue in Rice by Dual Pulse Laser Induced Breakdown Spectroscopy