Abstract:Split Hopkinson pressure bar (SHPB) is a widely used experimental technique for testing materials at a high strain-rate. SHPB testing of fiber-reinforced polymer (FRP) composite samples have become common in recent decades. Specimen geometry is one of the essential parameters that can ease sample fabrication and help in-situ analysis when altered as per convenience. Further, developing a computationally accurate model would reduce the need for multiple experimental iterations, thus saving cost and time. As part of the current study, high strain-rate tests using a compressive SHPB setup were conducted on glass/epoxy (GE) laminated composite samples of both square prismatic and cylindrical shape along the through-thickness direction experimentally. Negligible differences were observed due to the change in specimen geometry. Further, we know that the woven fabric consists of yarns, which are a bundle of fibers. The strain-rate dependency of the epoxy's material property is well known, but very limited information is available about the strain-rate dependency of yarn's properties. The effect of strain-rate dependency of the yarn was analysed numerically on Abaqus software using a square prismatic shaped yarn-level finite element composite model. The homogenised properties of the yarn were taken to be reflective of a high fiber volume fraction composite. The bulk epoxy's and yarn's material property were defined using the Johnson-Cook (JC) constitutive model, and the failure mechanism was defined using the JC damage model. One of the primary reasons for using this model is its availability and ease of implementation in almost every finite element analysis (FEA) simulation software. Three cases were analysed numerically, first keeping both yarn and bulk matrix property strain-rate dependent, second keeping the strain-rate dependency only in the bulk matrix, and in third case both yarn and matrix were kept strain-rate independent. It was observed that completely strain-rate dependent model showed comparable peak stress and strain values with the experimental result than other models.

Study on Strain-Rate-dependent Behaviour and Constitutive Model of Long Glass Fibre Reinforced Polypropylene Composite

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

Nonlinear Mechanical Behavior of Glass Fiber/ Epoxy Resin Composite Under Medium and Low Strain Rates Loading

Compression properties and constitutive model of short glass fiber reinforced poly-ether-ether-ketone (PEEK)

An empirical strain rate-dependent constitutive relationship for glass-fibre reinforced epoxy and pure epoxy

Effect of Strain Rate and Temperature on the Tensile Properties of Long Glass Fiber-Reinforced Polypropylene Composites

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

A Method for Plotting Failure Envelopes of Unidirectional Polymer Composite Materials under Different Strain Rates

On the Static and Dynamic Properties of Fiber-Reinforced Polymer Composites: A Three-Phase Constitutive Model

Review of Strain Rate Effects of Fiber-Reinforced Polymer Composites

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

A Dynamic Constitutive Model and Simulation of Braided CFRP under High-Speed Tensile Loading

Finite element modelling and experimentation of plain weave glass/epoxy composites under high strain-rate compression loading for estimation of Johnson-Cook model parameters

Manufacturing Process Effect on the Mechanical Properties of Glass Fiber/Polypropylene Composite Under High Strain Rate Loading: Woven (W-GF-PP) and Compressed GF50-PP

Experimental investigation on in-plane shear behavior of E-glass fiber/epoxy laminated composites under different strain rates

Evaluation of Tensile properties of FRP Composite Laminates under Varying Strain Rates and Temperatures

Rate-dependent Constitutive Model of Poly(ethylene Terephthalate) for Dynamic Analysis

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

A Modified Constitutive Equation For Unidirectional Composites Under Tensile Impact And The Dynamic Tensile Properties Of Kfrp

An experimental study on the tensile behavior of a unidirectional carbon fiber reinforced aluminum composite at different strain rates

Investigation of strain rate dependent microscopic failure mechanisms in short fiber reinforced plastics using finite element simulations