Highly-efficient Graphene-based Silicon Hybrid Plasmonic Waveguide Modulator

Xu Sun,Daoxin Dai,Hao Wu,Lars Thylén,Lech Wosinski

DOI: https://doi.org/10.1364/iprsn.2017.itu3a.2

2017-01-01

Abstract:A graphene-based silicon hybrid plasmonic waveguide modulator with 25GHz 3dB bandwidth is proposed in this work. Due to high optical power density at the graphene layers, modulation depth can reach as high value as 0.95dB/µm.

What problem does this paper attempt to address?

Electrical Modulation of Surface Plasmon Polariton Based on Graphene-Nanowire Hybrid Structure

Haoliang Qian,Yaoguang Ma,Qing Yang,Zhong Lin Wang

DOI: https://doi.org/10.1364/n3.2013.nsu1b.6

2013-01-01

Abstract:We demonstrate a dynamic surface plasmonic modulation based on graphene-nanowire hybrid structures at optical frequency, on the basis of the tunable optical absorption between SPPs and graphene through an applied external voltage.
Highly Efficient Graphene-Based Optical Modulator with Edge Plasmonic Effect

Ran Hao,Ziwei Ye,Xiliang Peng,Yijie Gu,Jianyao Jiao,Haixia Zhu,Wei E. Sha,Erping Li

DOI: https://doi.org/10.1109/jphot.2018.2841657

IF: 2.4

2018-01-01

IEEE Photonics Journal

Abstract:We report a highly efficient graphene-based modulator by using an edge plasmonic effect in this paper. The modulation efficiency of the proposed modulator can be as large as 1.58 dB/μm, which is several times larger than that of previous reported modulators. By enhancing the gap plasmon mode and the edge plasmonic effect in a well-designed diagonal waveguide, a wedge-to-wedge SPP mode is strongly confined in both horizontal and vertical directions in terms of a small mode area (Aef /A0 <; 1/1000), which significantly improves the light-graphene interaction. A large modulation efficiency of 4.05 dB/μm has been obtained after geometry optimization, which is the best values reported in our knowledge. The physical reason for the improvement is explored. We find the sharpness of the waveguide edges has strong impact on the field enhancement and modulation efficiency. Geometry optimization is made to further investigate the enhancement mechanisms and modulation capacities. Our results may promote the development of active nanophotonic devices incorporating two-dimensional materials.
Experimental Demonstration of a Graphene-Based Hybrid Plasmonic Modulator

Ran Hao,Jianyao Jiao,Xiliang Peng,Zheng Zhen,Rakhatbek Dagarbek,Yijun Zou,Erping Li

DOI: https://doi.org/10.1364/ol.44.002586

2019-01-01

Abstract:In this Letter, we report a graphene-based hybrid plasmonic modulator (GHPM) realized by employing the electro-absorption effect of graphene. The simulation results show that the modulation efficiency of GHPM, i.e., extinction ratio per length, can be as large as 0.417 dB/mu m, which is more than twice as much as that of recently presented graphene-on-silicon modulator. It was found that the improvement in modulation efficiency is mainly due to the enhancement of the overlap between graphene and the mode field in GHPM. A prototype of GHPM was fabricated. The measurement results showed that the GHPM can work in a broadband from 1530 to 1570 nm and an improved modulation efficiency of 1.08 dB (at 30 mu m). Finally, we have discussed the factors that influence the modulation efficiency. Our proof-of-concept design may promote the development of on-chip graphene-based plasmonic devices. (C) 2019 Optical Society of America
Hybrid plasmonic optical modulator based on multi-layer graphene

Hamid Vahed,Sahar Soltan Ahmadi

DOI: https://doi.org/10.1007/s11082-019-2118-z

IF: 3

2019-11-25

Optical and Quantum Electronics

Abstract:Hybrid plasmonic waveguide provided high confinement of the propagating light and it is compatible with silicon on insulator technology. Graphene with unique optical properties has been used in optical modulator to give a high extinction ratio, broadband operation, and small footprint. In this paper, we used graphene as an absorber layer in a hybrid plasmonic waveguide structure to get sub-wavelength field confinement and better interaction between the graphene and the propagating light to reach maximum absorption of the graphene. We studied the effects of a different number (2–6) of the graphene layers on the extinction ratio, bandwidth, and energy consumption. The modulation extinction ratio is as high as 36 dB/μm and it has a flat response in a wide range of wavelength. The power consumption is about 14 fJ/bit. This modulator has a good response in all communication bands.

engineering, electrical & electronic,optics,quantum science & technology
Broadband graphene modulator with high modulation depth based on tip plasmonic waveguide

Wei Chen,Xin Dong,Yan Xu,Yang Gao,Xiaoqiang Sun,Daming Zhang

DOI: https://doi.org/10.1016/j.ijleo.2022.168696

IF: 3.1

2022-04-01

Optik

Abstract:Broadband operation is a critical feature for high-speed electro-optic modulators in optical signal processing. To overcome the obstacle of material absorption-induced optical bandwidth shrinkage, graphene optical modulators based on the tip plasmonic concept have been proposed. The modulator is composed of buried double-layer graphene and Ag-SiO2-Si-SiO2-Ag hybrid structure with taper slots. Due to the tightened field confinement induced by the tip plasmonic effect, the light-graphene coupling is significantly enhanced. The direct metal layers contact with graphene is exploited to serve as the electrode. The simulation results based on the finite element method present a graphene modulator with a high modulation depth (MD) of 1.1 dB/μm and a relatively low propagation loss of 0.14 dB/μm. The power consumption is about 43.80 fJ/bit at the modulation length of 20 µm. The 3 dB-bandwidth is estimated to be around 340 GHz. Comparison with reported graphene modulators adopting hybrid plasmonic slot waveguide proves favorable modulation depth of proposed design, which promise its potentials in hybrid integration and on-chip signal processing.

optics
A Graphene-on-gap Modulator with High Modulation Efficiency

Ran Hao,Ziwei Ye,Xiliang Peng,Erping Li

DOI: https://doi.org/10.1109/icocn.2017.8121398

2017-01-01

Abstract:We propose a high efficient graphene-on-gap modulator (GOGM) by employing the hybrid plasmonic effect, whose modulation efficiency is ~8-folds larger than that of present graphene-on-silicon modulator (GOSM) (~0.1 dB / μm). The proposed modulator has the advantage of short modulation length ~3.6 μm, relatively low insertion loss ~0.32 dB and larger modulation bandwidth ~0.48 THz. Moreover, an efficient taper coupler has been designed to convert the quasi-transverse electric (TE) mode of conventional silicon waveguide to the hybrid plasmonic mode of GOGM, with a high coupling efficiency of 91%. This study may promote the design of high-performance on-chip electro-optical modulator.
Hybrid graphene plasmonic waveguide modulators

D. Ansell,I. P. Radko,Z. Han,F. J. Rodriguez,S. I. Bozhevolnyi,A. N. Grigorenko

DOI: https://doi.org/10.1038/ncomms9846

IF: 16.6

2015-11-10

Nature Communications

Abstract:The unique optical and electronic properties of graphene make possible the fabrication of novel optoelectronic devices. One of the most exciting graphene characteristics is the tunability by gating which allows one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic waveguides remains largely unexplored. Here we report fabrication and study of hybrid graphene–plasmonic waveguide modulators. We consider several types of modulators and identify the most promising one for telecom applications. The modulator working at the telecom range is demonstrated, showing a modulation depth of >0.03 dB μm−1 at low gating voltages for an active device area of just 10 μm2, characteristics which are already comparable to those of silicon-based waveguide modulators while retaining the benefit of further device miniaturization. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications.

multidisciplinary sciences
Ultra-Broadband Nonlinearity Enhancement Based on a Novel Graphene-Silicon Hybrid Waveguide: Structure Design and Theoretical Analysis.

Qiang Jin,Xibin Li,Junfan Chen,Shiming Gao

DOI: https://doi.org/10.1038/s41598-017-12554-6

IF: 4.6

2017-01-01

Scientific Reports

Abstract:A graphene-silicon hybrid waveguide with a dielectric spacer is proposed to enhance the nonlinear response in ultra-wide wavelength range by applying graphene's broadband highly nonlinear optical properties. The chemical potential of the graphene layer is tuned to satisfy the resonance condition and hence a low propagation loss is obtained. The dielectric spacer is used for avoiding additional free-carrier-absorption loss due to carrier interchange between the silicon core and the graphene layer. Aiming at the special waveguide structure with ultra-thin graphene layer, a full-vectorial theoretical model is developed to analyze its nonlinear properties. The waveguide dimensions are optimized in terms of the nonlinear parameter. The proposed hybrid waveguide exhibits high nonlinearity enhancement in an ultra-broad wavelength region covering near-infrared and mid-infrared bands. The conversion efficiency for a degenerate four-wave mixing process reaches -18.5 dB only with a pump power of 0.5 W and a waveguide length of tens of microns. In the wavelength range of 1.3-2.3 μm, the conversion efficiency can be kept stable by adopting suitable waveguide geometry and length. The corresponding 3-dB bandwidth can reach 40-110 nm for each fixed pump. The graphene-silicon hybrid waveguide has the potential to support chip-scale nonlinear applications in both near- and mid-infrared bands.
Modulator of surface plasmon polariton based cycle branch graphene waveguide

Jun Zhu,Zhengjie Xu,Wenju Xu,Duqu Wei

DOI: https://doi.org/10.5714/CL.2018.25.084

2018-01-01

Carbon letters

Abstract:At present, an important research area is the search for materials that are compatible with CMOS technology and achieve a satisfactory response rate and modulation efficiency. A strong local field of graphene surface plasmon polariton (SPP) can increase the interaction between light and graphene, reduce device size, and facilitate the integration of materials with CMOS. In this study, we design a new modulator of SPP-based cycle branch graphene waveguide. The structure comprises a primary waveguide of graphene-LiNbO3-graphene, and a secondary cycle branch waveguide is etched on the surface of LiNbO3. Part of the incident light in the primary waveguide enters the secondary waveguide, thus leading to a phase difference with the primary waveguide as reflected at the end of the branch and interaction coupling to enhance output light intensity. Through feature analysis, we discover that the area of the secondary waveguide shows significant localized fields and SPPs. Moreover, the cycle branch graphene waveguide can realize gain compensation, reduce transmission loss, and increase transmission distance. Numerical simulations show that the minimum effective mode field area is about 0.0130 lambda(2), the gain coefficient is about 700 cm(-1), and the quality factor can reach 150. The structure can realize the mode field limits of deep subwavelength and achieve a good comprehensive performance.
The Mach-Zehnder Modulator Based on Bi-Layer Graphene-Silicon-waveguide

Feng Zhou,Xiaofeng Jin

DOI: https://doi.org/10.1109/icocn.2017.8121256

2017-01-01

Abstract:We demonstrate that by inserting bi-layer graphene inside silicon waveguide, the modulation ability of the overall waveguide can be greatly enhanced. A Mach-Zehnder modulator based on this structure is proposed and the calculated results show the modulator exhibits an excellent performance in terms of small footprint (35 μm2) and high extinction ration (31 dB). Besides, it requires low applied voltage and can be compatible with CMOS technology.
Highly Linear Graphene Modulator Based on Silicon Waveguide for Integrated Microwave Photonics

Yuansheng Tao,Haowen Shu,Zhennan Wu,Ming Jin,Xingjun Wang

DOI: https://doi.org/10.1109/acp.2018.8595970

2018-01-01

Abstract:We demonstrated the highly linear graphene modulators based on silicon waveguide employing the electro-absorption and electro-refractive effect of graphene, with the spurious-free dynamic range (SFDR) of 109.55 dB·Hz 2/3 and 121.05 dB·Hz 2/3 .
Single-layer graphene optical modulator based on arrayed hybrid plasmonic nanowires

Zhikai Li,Jiyuan Huang,Zhuohang Zhao,Yulin Wang,Chengping Huang,Yong Zhang

DOI: https://doi.org/10.1364/OE.434916

IF: 3.8

2021-01-01

Optics Express

Abstract:Surface plasmon-polaritons (SPPs)-based waveguides, especially hybrid plasmonic nanowires, which have attracted extensive interests due to easy fabrication, high transmittance, subwavelength mode confinement and long propagation distance, are appropriate platforms for enhancing the interaction with graphene. Considering that graphene is a two-dimensional (2D) material with surface conductivity, it is important to enhance the in-plane electrical components parallel to graphene. Here, we propose a tunable graphene optical modulator based on arrayed hybrid plasmonic nanowires, utilizing strong subwavelength confinement of gap-surface plasmonic modes (GSPMs) and near-field coupling in the periodic metasurface structure to enhance effective light-matter interactions. The modulator has a typical modulation depth (MD) of 4.7 dB/mu m, insertion loss (IL) of 0.045 dB/mu m, and a broadband response. The modulation performance can be further optimized, achieving MD of 16.7 dB/mu m and IL of 0.17 dB/mu m. Moreover, with the optimized modulator, the 3 dB bandwidth can reach 200 GHz. The energy consumption of modulator is about 0.86 fJ/bit. Our design exhibits fascinating modulation performance, fabrication compatibility and integration potential. It may inspire the schematic designs of graphene-based plasmonic modulator and pave a way to the application of 2D materials-involved optoelectronic devices. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Graphene-Based Hybrid Plasmonic Modulator With High Modulation Efficiency

Jianyao Jiao,Ran Hao

DOI: https://doi.org/10.1109/ICOCN.2019.8934118

2019-01-01

Abstract:A graphene-based hybrid plasmonic modulator (GHPM) is proposed by adopting the electro-absorption effect of graphene. The simulation results show that the modulation efficiency of GHPM can be as large as 0.417 dB/mu m, which is more than twice as much as that of recently presented graphene-on-silicon modulator (GOSM). Then we fabricate a prototype of GHPM. The measurement results demonstrate that the GHPM can work in a broadband from 1530 nm to 1570 nm and an improved modulation efficiency of 1.08 dB (at 30 mu m). At last, we have discussed the factors that influence the modulation efficiency. Our work may promote the development of on-chip graphene-based plasmonic devices.
Enhancing modulation performance by design of hybrid plasmonic optical modulator integrating multi-layer graphene and TiO 2 on silicon waveguides

Wisut Supasai,Apirat Siritaratiwat,Chavis Srichan,Suksan Suwanarat,Narong Amorntep,Mongkol Wannaprapa,Nuttachai Jutong,Papichaya Chaisakul,Thalerngsak Wiangwiset,Sorawit Narkglom,Thongsavanh Keokhoungning,Chayada Surawanitkun

DOI: https://doi.org/10.1088/1361-6528/ad43f2

IF: 3.5

2024-05-18

Nanotechnology

Abstract:A novel way to enhance modulation performance is through the design of a hybrid plasmonic optical modulator that integrates multi-layer graphene and TiO 2 on silicon waveguides. In this article, a design is presented of a proposed modulator based on the use of the two-dimensional finite difference eigenmode solver, the three-dimensional eigenmode expansion solver, and the CHARGE solver. Leveraging inherent graphene properties and utilizing the subwavelength confinement capabilities of hybrid plasmonic waveguides (HPWs), we achieved a modulator design that is both compact and highly efficient. The electrical bandwidth f 3dB is at 460.42 GHz and it reduces energy consumption to 12.17 fJ/bit with a modulator that functions at a wavelength of 1.55 μm. According to our simulation results, our innovation was the optimization of the third dielectric layer's thickness, setting the stage to achieve greater modulation depths. This synergy between graphene and HPWs not only augments subwavelength confinement, but also optimizes light–graphene interaction, culminating in a markedly enhanced modulation efficiency. As a result, our modulator presents a high extinction ratio and minimized insertion loss. Furthermore, it exhibits polarization insensitivity and a greater bandwidth. Our work sets a new benchmark in optical communication systems, emphasizing the potential for the next generation of chip-scale with high-efficiency optical modulators that significantly outpace conventional graphene-based designs.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
High Efficiency Graphene-Silicon Hybrid-Integrated Thermal and Electro-Optical Modulator

Xiaoxuan Wu,Zheng-Yi Cao,Tianxiang Zhao,Yun Wu,Zhonghui Li,Spyros Doukas,Elefterios Lidorikis,Yu Xue,Liu Liu,Omid Ghaebi,Giancarlo Soavi,Junpeng Lu,Zhenhua Ni,Junjia Wang

DOI: https://doi.org/10.1039/d4nh00160e

2024-06-15

Nanoscale Horizons

Abstract:Graphene modulators are considered as a protential solution to achieve hign efficiency light modulation, and the graphene-silicon hybrid-integrated modulators are particularly faverable due to the CMOS compatibility and low cost. The exploitation of Graphene modulator latent capabilities remains an ongoing endeavour to improve the modulation and energy efficiency. Here, high-efficiency graphene-silicon hybrid-integrated thermal and electro-optical modulators are realized using gold-assisted transfer. We fabricate and demonstrate a microscale thermo-optical modulator with a tuning efficiency of 0.037 nm/mW and a high heating performance of 67.4 K∙μm 3 ∙mW -1 on a small active area of 7.54 μm 2 and a graphene electro-absorption modulator featuring a high speed date rate reaching 48 Gb/s and a low power conspution of 200 fJ/bit. These devices show superior performances compared to state of the art in terms of efficiency, low process complexity, and compact device footage, which can support the realization of high-performance graphene-silicon hybrid-integrated photonic circuits with CMOS compatibility.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
A Novel Graphene-Silicon Hybrid Waveguide for Nonlinearity Enhancement in Near-Infrared Band

Qiang Jin,Jiamei Lu,Qiang Yan,Xibin Li,Qianyu Gao,Shiming Gao

DOI: https://doi.org/10.1364/cleo_at.2015.jtu5a.27

2015-01-01

Abstract:A novel graphene-silicon hybrid waveguide is proposed to enhance the nonlinearity in near-infrared band using a MoO3 overlayer for light confinement. A four-wave mixing efficiency of -27.3 dB is numerically obtained in a 25-μm-long waveguide.
Terahertz Modulator Based On Graphene-Embedded Waveguide

Xiliang Peng,Ran Hao,Er-Ping Li

DOI: https://doi.org/10.1109/ICOCN.2016.7875776

2016-01-01

Abstract:We reported a novel terahertz modulator based on graphene-embedded waveguide. Comparing to previous solution, the terahertz wave-matter interaction in the modulator structure is enhanced greatly. In theory, the modulation depth can be nearly 100% as the simulation results show. Experimental characterisations are carried out through continuous terahertz wave system and the terahertz time-domain spectroscopy (TDZ) system respectively. The best experimental modulation depth is 29.53%, which is much larger than state-of-art results.
Design and Optimization of Optical Modulators Based on Graphene-on-silicon Nitride Microring Resonators

Zeru Wu,Yujie Chen,Tianyou Zhang,Zengkai Shao,Yuanhui Wen,Pengfei Xu,Yanfeng Zhang,Siyuan Yu

DOI: https://doi.org/10.1088/2040-8986/aa5519

IF: 2.1

2017-01-01

Journal of Optics

Abstract:In order to overcome the challenge of obtaining high modulation depth due to weak graphenelight interaction, a graphene-on-silicon nitride (SiNx) microring resonator based on graphene's gate-tunable optical conductivity is proposed and studied. Geometrical parameters of grapheneon-SiNx waveguide are systematically analyzed and optimized, yielding a loss tunability of 0.04 dB mu m(-1) and an effective index variation of 0.0022. We explicitly study the interaction between graphene and a 40 mu m-radius microring resonator, where electro-absorptive and electrorefractive modulation are both taken into account. By choosing appropriate graphene coverage and coupling coefficient, a high modulation depth of over 40 dB with large fabrication tolerance is obtained.
High-bandwidth Si/In2O3 Hybrid Plasmonic Waveguide Modulator

Yishu Huang,Jun Zheng,Bingcheng Pan,Lijia Song,Kuan-An Chen,Zejie Yu,Hui Ye,Daoxin Dai

DOI: https://doi.org/10.1063/5.0087540

IF: 5.6

2022-01-01

APL Photonics

Abstract:A novel Si/In2O3 hybrid plasmonic waveguide modulator was experimentally realized by using an asymmetric directional coupler (ADC), which consists of a silicon photonic waveguide and a Si/In2O3 hybrid plasmonic waveguide. All the silicon cores are covered with a silica layer, above which there is a metal–oxide–semiconductor (MOS) capacitor consisting of the In2O3/HfO2/Au layers. The Au layer sitting on the top of the MOS capacitor works as the top-electrode, while the In2O3 thin film covers the sidewall and contacts with the Au bottom-electrode. When the bias voltage is not applied, light launched from the silicon photonic waveguide is weakly coupled into the Si/In2O3 hybrid plasmonic waveguide, and thus, one has a high transmission at the through port of the ADC. On the other hand, when the bias voltage is applied, the carrier density in the In2O3 layer is changed, which introduces some modification to the refractive index of the In2O3 thin film. As a result, light is strongly cross-coupled from the silicon photonic waveguide to a Si/In2O3 hybrid plasmonic waveguide, and one has low transmission at the through port. In this Letter, an ultra-compact Si/In2O3 hybrid plasmonic waveguide modulator is realized with a 3.5-μm-long ADC. In the experiments, the fabricated waveguide modulator works well and exhibits a high modulation bandwidth of >40 GHz for the first time.
Ultra-compact Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator with a high bandwidth beyond 40 GHz

Yishu Huang,Jun Zheng,Bingcheng Pan,Lijia Song,Guanan Chen,Zejie Yu,Hui Ye,Daoxin Dai

DOI: https://doi.org/10.48550/arXiv.2201.06258

2022-01-17

Applied Physics

Abstract:Optical modulators are required to have high modulation bandwidths and a compact footprint. In this paper we experimentally demonstrate a novel Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator, which is realized by an asymmetric directional coupler (ADC) consisting of a silicon photonic waveguide and a Si/In$_2$O$_3$ hybrid plasmonic waveguide. The optical signal is modulated by radio-frequency (RF) signal applied on the Au electrodes at the top of MOS capacitor and contacting the In$_2$O$_3$ thin film. The record-high modulation bandwidth of >40 GHz is realized by a silicon-doping-free metal-oxide-In$_2$O$_3$ capacitor integrated in a 3.5-$\mu$m-long asymmetric directional coupler (ADC) for the first time.

Highly-efficient Graphene-based Silicon Hybrid Plasmonic Waveguide Modulator

Electrical Modulation of Surface Plasmon Polariton Based on Graphene-Nanowire Hybrid Structure

Highly Efficient Graphene-Based Optical Modulator with Edge Plasmonic Effect

Experimental Demonstration of a Graphene-Based Hybrid Plasmonic Modulator

Hybrid plasmonic optical modulator based on multi-layer graphene

Broadband graphene modulator with high modulation depth based on tip plasmonic waveguide

A Graphene-on-gap Modulator with High Modulation Efficiency

Hybrid graphene plasmonic waveguide modulators

Ultra-Broadband Nonlinearity Enhancement Based on a Novel Graphene-Silicon Hybrid Waveguide: Structure Design and Theoretical Analysis.

Modulator of surface plasmon polariton based cycle branch graphene waveguide

The Mach-Zehnder Modulator Based on Bi-Layer Graphene-Silicon-waveguide

Highly Linear Graphene Modulator Based on Silicon Waveguide for Integrated Microwave Photonics

Single-layer graphene optical modulator based on arrayed hybrid plasmonic nanowires

Graphene-Based Hybrid Plasmonic Modulator With High Modulation Efficiency

Enhancing modulation performance by design of hybrid plasmonic optical modulator integrating multi-layer graphene and TiO 2 on silicon waveguides

High Efficiency Graphene-Silicon Hybrid-Integrated Thermal and Electro-Optical Modulator

A Novel Graphene-Silicon Hybrid Waveguide for Nonlinearity Enhancement in Near-Infrared Band

Terahertz Modulator Based On Graphene-Embedded Waveguide

Design and Optimization of Optical Modulators Based on Graphene-on-silicon Nitride Microring Resonators

High-bandwidth Si/In2O3 Hybrid Plasmonic Waveguide Modulator

Ultra-compact Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator with a high bandwidth beyond 40 GHz