Abstract:The productivity, surface finish, and dimensional accuracy during machining are directly related to the vibration characteristics of tool tip. Moreover, the dynamics of tool tip is not only determined by the flexibility of tool, collet, holder and spindle, but also depends on the contact characteristics of joint interfaces. This paper proposes a fully analytical model of the spindle-holder-tool system considering the nonlinear contact characteristics of joint interfaces. The dynamics of spindle, holder, collet and tool are modeled applying Timoshenko beam theory considering the combined shear and rotational effects, in which the tapered sections of spindle, holder and collet are modeled using multi-stepped beam to account for the taper effect. Under highly dynamic cutting load, the variation in the spacing of joint interfaces will induce the changes in the contact characteristics due to the corresponding vibrations. Therefore, the contact behaviors of spindle/holder, collet/holder, collet/nut, and tool/collet interfaces are analytically modeled using the distributed nonlinear spring-damping layers. The fractal theory and the slicing method are applied to derive the vibration displacement-dependent stiffness matrix of nonlinear springs in joint interfaces considering the surface morphology, geometry, material properties, and locking force of joint interfaces. Furthermore, the five degree of freedom (DOF) nonlinear stiffness model of the spindle-bearing joint dependent on vibration displacement is also considered. The effectiveness of the established analytical dynamic model is verified through vibration testing and modal hammering experiments. The changes in the vibration characteristics by considering the connection ways of joint interfaces, the fractal parameters of joint interfaces and the rotation speed are also investigated. The developed model can provide some theoretical principles for the optimization at design stage without prototypes.

Semi-Analytical Modelling of Synthetic Static Stiffness for Machining System of Five Axis Machine Tool

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Stiffness Modeling of Machine Tools Based on Machining Space Analysis

Stiffness Analysis of Machine Tools Using Finite Element Method

Stiffness Optimization of a Heavy Hybrid Machine Tool Named XNZH2430

Energy Efficiency Evaluation of Five-axis Machine Tools with Different Configurations Based on Workspace Stiffness and Machining Energy Consumption

STATIC STIFFNESS RESEARCH AND OPTIMIZATION ON A HYBRID MACHINE TOOL CONSIDERING THE STIFFNESSES OF BEARINGS AND GUIDEWAYS

Dynamic Modeling and Analysis for Gantry-Type Machine Tools Considering the Effect of Axis Coupling Force on the Slider–guide Joints’ Stiffness

Investigation of machine tool rigidity through measurements and FEA

Characterizing machine tool spatial stiffness and predicting accuracy

Analysis of Dynamic Characteristics for Machine Tools Based on Dynamic Stiffness Sensitivity

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Stiffness Analysis and Optimization of a Hybrid Machine Tool Based on the Stiffness Matrix

Modeling and Analysis of a Super Heavy Numeric Control Boring and Milling Machine

Static stiffness research of a hybrid machine tool based on the element stiffness matrix

Modeling and Investigation of Spatial Operation Stiffness in Robotic Milling Process Considering Bidirectional Weak-Stiffness of Robot-Workpiece System

Stiffness Analysis of Gantry Hybrid Machine Tools

Static Stiffness Tuning Method of Rotational Joint of Machining Center

A workpiece setup optimization method for 5-axis machining with motion coherence and stiffness enhancement

STIFFNESS ANALYSIS AND DESIGN OF 2-DOF PLANAR PARALLEL MANIPULATOR