Abstract:Space charge effect is undesirable for HV and EHV plastic power cable. Up to now, the insulating materials of most DC power cables are traditional modified polyethylene (PE) in order to have superior dielectric properties such as space charge accumulation, volume resistivity, breakdown strength and so on. The common modification can be achieved by various methods such as the uses of additives, blending, grafting and copolymerization. In general, blending is a widely used technique to improve dielectric properties of PE. Based on blending technique, metallocene catalyzed polyethylene (MPE) is blended into low-density polyethylene (LDPE) in this paper. Then the space charge profile in the blends is measured by pulsed electro-acoustic (PEA) method. And at the same time, the volume resistivity of blends is measured by micro-current detector. In addition, the AC breakdown strength of blends is measured by step voltage. It is shown by test results that LDPE blending with 1% of MPE could effectively decrease the space charge effect, increase the AC breakdown strength by 7.9% and slightly reduce the volume resisitivity. The test results of the resistivity are consistent with that of space charges. It is validated that the blending by proper amount of MPE could decrease the deep traps, increase the shallow traps and the charge mobility in LDPE. Polyethylene is a typical semicrystalline including crystal phase and amorphous phase. The electrical breakdown path advances along the boundaries of spherulites, or trans-crystal, or lamella of LDPE, which means that electrical breakdown path go through amorphous area in polymers. So the increase of AC breakdown strength may be related with the micro-structure and crystalline morphology of LDPE, such as the increase of crystal phase and the decrease of amorphous, or the increase of crystallinity can improve the breakdown strength. At the end of this paper, the relation among material structure, charge trap and dielectric properties in the blends is analyzed and discussed.

Effect of Blend of Polystyrene on the Temperature Dependence of DC Breakdown Characteristics of Polyethylene

Insights on the Breakdown Characteristics of PPLP under Different Test Protocols and Temperatures

Enhancement of Insulation Properties of Cross-Linked Polyethylene Utilizing Aromatic Voltage Stabilizers with Electron-Withdrawing and Electron-Donating Groups

Enhancement of Insulating Properties of Polyethylene Blends by Delocalization Type Voltage Stabilizers

Influence of Thermal Aging on Insulation Properties of Voltage Stabilizer Blended Cross-Linked Polyethylene

Temperature Dependence of Crystalline Structure and DC Performance in LLDPE/HDPE Blending Material

DC Breakdown Characteristics of LLDPE-based XLPE with Different Crosslinking Degrees

Temperature Dependence of Mechanical, Electrical Properties and Crystal Structure of Polyethylene Blends for Cable Insulation

Enhanced High-Temperature Dc Dielectric Performance Of Crosslinked Polyethylene With A Polystyrene Pinning Structure

Dc Dielectric Properties Of Thermo-Plastic Polyolefin Materials

Temperature Stability of DC Conductivity and Breakdown of Crosslinked LLDPE

Crosslinking Dependence of Direct Current Breakdown Performance for XLPE-PS Composites at Different Temperatures

Characterization of Polypropylene Modified by Blending Elastomer and Nano-Silica

Effects of dicumyl peroxide content on DC properties of polystyrene pinning crosslinked polyethylene for potential application in HVDC cable insulation

Evaluation of polypropylene/polyolefin elastomer blends for potential recyclable HVDC cable insulation applications

Polyethylene Blends With/without Graphene for Potential Recyclable HVDC Cable Insulation

Dielectric Properties in Low Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

Enhanced DC Breakdown Strength of XLPE Via Denser Cross-Linking Network Formation with Liquid Polybutadiene

Study on high-temperature and high-voltage insulation characteristics of polypropylene blend with highly packed elastomeric domains for power cable applications

Evolution from micropinned to polymeric alloy structure of XLPE‐PS: Improving electrical properties and mechanism