Abstract:We theoretically and experimentally demonstrate an all-fiber multi-channel ultrasonic sensor using a switchable fiber Bragg gratings (FBGs) filter in an erbium-doped fiber laser (EDFL). The FBGs are not only used as the filter to determine the laser wavelength, but also as the sensing element to induce the intensity response of the lasing line via cavity loss modulation from the ultrasound-induced relative spectral shift of the matched FBGs. The switchable FBGs filter consists of a tuning FBG and several sensing FBGs. Multi-channel ultrasound detection is achieved via this filter by tuning an FBG to scan the spectra of multiple sensing FBGs. The ultrasonic-detection channel can be flexibly and efficiently switched via tuning the tunable FBG to match with any one of the sensing FBGs. A novel dynamic response model of the EDFL based on wavelength-dependent gain is proposed and developed to study the effects of different spectrally matched FBG positions and the consistency of the ultrasound response of each detection channel. The theoretical results show that the optimal sensing position is at the overlapping regions of spectra when the slope of the FBGs is greatest and the laser power is relatively high. Meanwhile, the consistency of the ultrasound response for each detection channel is influenced by the laser-resonance condition of the EDFL and can be optimized by adjusting the laser-cavity loss. Such theoretical results are well-verified experimentally. This sensor-laser-integrated system achieves high ultrasonic detection response since cavity-loss modulation is related to the amplifying effect of the laser. Using this method, an eight-channel switchable ultrasonic-sensing system has been demonstrated, covering nearly a 16-nm spectral range. By further controlling the cavity loss in the laser system, the consistency of ultrasonic response of each detection channel was optimized. The proposed all-fiber system has multiple-detection channels in a single laser system and consistent ultrasonic-detection response at each channel; it shows great potential for fiber-optic-ultrasonic-detection applications.

Sub-MHz Ultrasonic Sensor Using Fiber Laser Based on Random Fiber Grating

High-Efficiency Random Fiber Laser Based on Strong Random Fiber Grating for MHz Ultrasonic Sensing

Low-Loss Random Fiber Gratings Made With an fs-IR Laser for Distributed Fiber Sensing

Optical fiber random grating-based multiparameter sensor.

Fiber-Optic Ultrasonic Sensing Via Quasi-Continuous Quadrature Frequency Modulation

High-performance fiber laser ultrasound detectors

Adaptive ultrasonic sensor using a fiber ring laser with tandem fiber Bragg gratings

Bragg Grating–based Fiber Laser Vibration Sensing System with Novel Phase Detection

Characterization of Single Frequency Fiber-Laser-Based Ultrasound Sensor

Simultaneous Strain and Temperature Fiber Grating Laser Sensor Based on Radio-Frequency Measurement

Ultralow‐Noise Single‐Frequency Fiber Laser and Application in High‐Resolution Fiber‐Optic Dynamic Strain Sensing

Broadband high-sensitivity acoustic sensing based on Brillouin random fiber laser

Implementation of Er-doped random fiber laser self-mixing sensor with ultra-limit sensitivity

Pico-Strain Resolution Multiplexed Fiber Grating Sensor Array Interrogated with Mode-Locked Laser

Ultrasonic Lamb Wave Detection Based on a Tunable, Narrow-Linewidth, and Frequency-Locked Fiber Laser

A Multi-Point Switchable and Self-Adaptive Ultrasonic Sensor Using Fiber Bragg Gratings in a Fiber Ring Laser

Ultrasensitive ultrasound detection using an intracavity phase-shifted fiber Bragg grating in a self-injection-locked diode laser

Random Fiber Laser Dynamic Sensing Based on Rapid Spectral Detection

Fiber-laser Ultrasonic Sensor Based on Remote Coupling

An All-Fiber Multi-Channel Ultrasonic Sensor Using a Switchable Fiber Bragg Gratings Filter in Erbium-Doped Fiber Laser

Long-distance Fiber Bragg Grating Sensor System Based on Time Division Multiplexing and Narrow Wavelength Swept Laser