Abstract:Extrusion printing of interdigitated electrodes for flexible microsupercapacitors (fMSCs) offers an attractive route to the fabrication of flexible devices where cost, scalability, and processability of ink formulations are critical. In this work, highly concentrated, viscous, and water‐dispersible inks are developed based on graphene oxide (GO)/polyaniline (PANi) composite for extrusion printing. The optimized GO/PANi‐based all‐solid‐state symmetric fMSCs obtained by extrusion printing interdigitated microelectrodes can deliver outstanding areal capacitance of 153.6 mF cm−2 and volumetric capacitance of 19.2 F cm−3 at 5 mV s−1. It is shown that by fabricating asymmetric fMSCs using the GO/PANi as positive electrode and a graphene‐based negative electrode, the voltage window can be widened from 0.8 to 1.2 V and improvements can be achieved in energy density (from 3.36 to 4.83 mWh cm−3), power density (from 9.82 to 25.3 W cm−3), and cycling stability (from 75% to 100% capacitance retention over 5000 cycles) compared with the symmetric counterpart. The simple ink preparation and facile device fabrication protocols reported here make the scalable fabrication of extrusion printed fMSCs a promising technology. A concentrated, viscous, and water‐dispersible ink comprised of graphene oxide/polyaniline hierarchical structure is facilely prepared with the stabilizer of poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) for extrusion printing. The printed symmetric microsupercapacitors can deliver outstanding areal and volumetric capacitance. The technique is also applicable to prepare asymmetric microsupercapacitors, which exhibit improved performance (i.e., energy, power densities, and cycling stability) than the symmetric ones.

Direct Inkjet Printing of Flexible MXene/graphene Composite Films for Supercapacitor Electrodes

Direct Inkjet Printing of Aqueous Inks to Flexible All-Solid-State Graphene Hybrid Micro-Supercapacitors.

Rational Formulation of Graphene Nanocomposite Ink for 2D Mutually Embedded Structure Interdigital Microsupercapacitors

A facile approach to fabricate flexible all-solid-state supercapacitors based on MnFe2O4/graphene hybrids

Electrolyte-mediated dense integration of graphene-MXene films for high volumetric capacitance flexible supercapacitors

Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application

MXene/Graphdiyne nanotube composite films for Free-Standing and flexible Solid-State supercapacitor

Boosting Ion Diffusion Kinetics of MXene Inks with Water‐in‐Salt Electrolyte for Screen‐Printed Micro‐Supercapacitors

Graphene-Based Inks for Flexible Supercapacitor Electrodes: A Review

Sand-Milling Fabrication of Screen-Printable Graphene Composite Inks for High-Performance Planar Micro-Supercapacitors

Direct‐Ink‐Write 3D Printing of Programmable Micro‐Supercapacitors from MXene‐Regulating Conducting Polymer Inks

Development of Graphene Oxide/Polyaniline Inks for High Performance Flexible Microsupercapacitors via Extrusion Printing

Monolithic flexible supercapacitors drawn with nitrogen-doped carbon nanotube-graphene ink

Flexible Metallic Fabric Supercapacitor Based on Graphene/polyaniline Composites

Construction of porous and free-standing film electrodes composed of MXene, carbon nanocoils and PEDOT:PSS for high-performance flexible supercapacitors

Highly stable aqueous carbon-based conductive ink for screen-printed planar flexible micro-supercapacitor

Recent Advances of Flexible MXene and its Composites for Supercapacitors

3D Printing MXene-Based Film and Cellulose Nanofiber Reinforced Hydrogel Electrolyte to Enable High‐Performance Flexible Supercapacitor

Electrostatic Self-Assembly of Citrus Based Carbon Nanosheets and MXene: Flexible Film Electrodes and Patterned Interdigital Electrodes for All-Solid Supercapacitors

Graphene Aerogel Ink for the Inkjet Printing of the Micro-Supercapacitors