Abstract:Supercapacitors have the characteristics of high power density, long cycle life, and fast charge and discharge rates, making them promising alternatives to traditional capacitors and batteries. The use of transition-metal compounds as electrode materials for supercapacitors has been a compelling research topic in recent years because their use can effectively enhance the electrical performance of supercapacitors. The current research on capacitor electrode materials can mainly be divided into the following three categories: carbon-based materials, metal oxides, and conductive polymers. Nickel hydroxide (Ni(OH)2) is a potential electrode material for use in supercapacitors. Depending on the preparation conditions, two crystal phases of nickel hydroxide, α and β, can be produced. When compared to α-NiOH, the structure of β-Ni(OH)2 does not experience ion intercalation. As a result, the carrier transmission rate of α-Ni(OH)2 is slower, and its specific capacitance value is smaller. Its carrier transport rate can be improved by adding conductive materials, such as graphene. β-Ni(OH)2 was chosen as an electrode material for a supercapacitor in this study. Homemade low-pressure chemical vapor deposition graphene (LPCVD-Graphene) conductive material was introduced to modify β-Ni(OH)2 in order to increase its carrier transport rate. The LPCVD method was used to grow high-quality graphene films on three-dimensional (3D) nickel foam substrates. Then, a hydrothermal synthesis method was used to grow β-Ni(OH)2 nanostructures on the 3D graphene/nickel foam substrate. In order to improve the electrical properties of the composite structure, a high-quality graphene layer was incorporated between the nickel hydroxide and the 3D nickel foam substrate. The effect of the conductive graphene layer on the growth of β-Ni(OH)2, as well as its electrical properties and electrochemical performance, was studied. When this β-Ni(OH)2/CVD-Graphene/3D-NF (nickel foam) material was used as the working electrodes of the supercapacitor under a current density of 1 A/g and 3 A/g, they exhibited a specific capacitance of 2015 F/g and 1218.9 F/g, respectively. This capacitance value is 2.62 times higher than that of the structure without modification with a graphene layer. The capacitance value remains at 99.2% even after 1000 consecutive charge and discharge cycles at a current density of 20 A/g. This value also improved compared to the structure without graphene layer modification (94.7%).

Low-crystalline Β-Ni(oh)2 Nanosheets on Nickel Foam with Enhanced Areal Capacitance for Supercapacitor Applications

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

A hierarchical NiO/NiMn-layered double hydroxide nanosheet array on Ni foam for high performance supercapacitors.

NiCo2S4@Ni3S2 Hybrid Nanoarray on Ni Foam for High-Performance Supercapacitors

In Situ Growth of Nico2s4 Nanotube Arrays on Ni Foam for Supercapacitors: Maximizing Utilization Efficiency at High Mass Loading to Achieve Ultrahigh Areal Pseudocapacitance

Synthesis of NiMn-LDH Nanosheet@Ni 3 S 2 Nanorod Hybrid Structures for Supercapacitor Electrode Materials with Ultrahigh Specific Capacitance

A Few Atoms Thick Nickel–Cobalt Oxides Mesoporous Nanosheets and Their Arrays on Ni Foam for Supercapacitors with Ultra-Long Cycling Lifespan

High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam As a Binder Free Electrode for Supercapacitors

In situ growth of NiCo2O4 nanosheets arrays on Ni foam for high-performance supercapacitor

Simple deposition of mixed α, β-nickel hydroxide thin film onto nickel foam as high-performance supercapacitor electrode material

Solution growth of NiO nanosheets supported on Ni foam as high-performance electrodes for supercapacitors

Ultrathin Β-Ni(oh)2 Nanoplates Vertically Grown on Nickel-Coated Carbon Nanotubes As High-Performance Pseudocapacitor Electrode Materials.

Ni3si2 Nanowires Grown in Situ on Ni Foam for High-Performance Supercapacitors

Preparation and Electrochemical Properties of NiCo2O4 Nanorods Grown on Nickel Foam Filled by Carbon-Coated Attapulgite for Supercapacitors

Preparation of Electrodes with β-Nickel Hydroxide/CVD-Graphene/3D-Nickel Foam Composite Structures to Enhance the Capacitance Characteristics of Supercapacitors

Ultrathin Mesoporous Nio Nanosheet-Anchored 3d Nickel Foam As An Advanced Electrode For Supercapacitors

Nickel hydroxide nanosheets grown on nickel foam for high performance supercapacitor applications

In Situ Growth of 2D Ultrathin NiCo 2 O 4 Nanosheet Arrays on Ni Foam for High Performance and Flexible Solid‐State Supercapacitors

Binder-Free Nickel Oxide Lamellar Layer Anchored CoOx Nanoparticles on Nickel Foam for Supercapacitor Electrodes

Nanoflower-like Ag adhered NiMo( OH ) x composite arrays on nickel foam for high-performance supercapacitor

Nickel–Cobalt Hydroxide Microspheres Electrodepositioned on Nickel Cobaltite Nanowires Grown on Ni Foam for High-Performance Pseudocapacitors