Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

Large-scale Preparation of Flexible Phase Change Composites with Synergistically Enhanced Thermally Conductive Network for Efficient Low-Grade Thermal Energy Recovery and Utilization

Large-scale preparation of leakage-proof phase change composites with compressed enhanced thermally conductive network for efficient thermal management

Large-scale Fabrication of Flexible EPDM/MXene/PW Phase Change Composites with Excellent Light-to-thermal Conversion Efficiency Via Water-Assisted Melt Blending

Biomass porous carbon/polyethylene glycol shape-stable phase change composites for multi-source driven thermal energy conversion and storage

Improving thermal conductivity of ethylene propylene diene monomer/paraffin/expanded graphite shape-stabilized phase change materials with great thermal management potential via green steam explosion

Synergistically-Enhanced Thermal Conductivity Of Shape-Stabilized Phase Change Materials By Expanded Graphite And Carbon Nanotube

Large-Scale Fabrication of Flexible EVA/EG@PW Phase Change Composites with High Thermal Conductivity for Thermal Management

Constructing heat conduction path and flexible support skeleton for PEG-based phase change composites through salt template method

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

Absorption-polymerization method for synthesizing phase change composites with high enthalpy and thermal conductivity for efficient thermal energy storage

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Enhanced thermal conductivity of form-stable composite phase-change materials with graphite hybridizing expanded perlite/paraffin

Preparation of PE-EPDM Based Phase Change Materials with Great Mechanical Property, Thermal Conductivity and Photo-Thermal Performance

3D Hierarchical Porous Expanded Perlite-Based Composite Phase-Change Material with Superior Latent Heat Storage Capability for Thermal Management

Dual‐Encapsulated Highly Conductive and Liquid‐Free Phase Change Composites Enabled by Polyurethane/Graphite Nanoplatelets Hybrid Networks for Efficient Energy Storage and Thermal Management

Scalable fabrication of high-enthalpy polyethylene/carbon nanotubes/paraffin wax nanocomposite with flexibility and superhydrophobicity for efficient thermal management

Experimental study on preparation and thermal storage properties of expanded graphite/paraffin wax as a shape-stabilized phase change material

Efficient preparation of polydimethylsiloxane-based phase change composites by forced network assembly with outstanding thermal management capability

High Thermally Conductive Shape-Stabilized Phase Change Composites with Dual-Aligned Carbon Nanofiber Scaffolds

Thermally Conductive and Shape‐Stabilized Polyethylene Glycol/Carbon Foam Phase‐Change Composites for Thermal Energy Storage

Highly Conductive Solid-Solid Phase Change Composites and Devices Enhanced by Aligned Graphite Networks for Solar/electro-Thermal Energy Storage