Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

Improving thermal conductivity of ethylene propylene diene monomer/paraffin/expanded graphite shape-stabilized phase change materials with great thermal management potential via green steam explosion

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

Large-scale preparation of leakage-proof phase change composites with compressed enhanced thermally conductive network for efficient thermal management

Fabrication and Building Energy-Saving Performance Evaluation of Polyethylene Glycol/polymethyl Methacrylate/expanded Graphite Thermal Enhanced Shape-Stable Phase Change Material

Series of solid-solid phase change materials with ultra-high thermal stability and controllable phase change temperature: kilogram-leveled preparation and application investigation

Synergistically-Enhanced Thermal Conductivity Of Shape-Stabilized Phase Change Materials By Expanded Graphite And Carbon Nanotube

Thermal Behavior of Composite Phase Change Materials Based on Polyethylene Glycol and Expanded Vermiculite with Modified Porous Carbon Layer

Paraffin/polyethylene/graphite composite phase change materials with enhanced thermal conductivity and leakage-proof

Structure, Characterization and Thermal Properties of the Form-Stable Paraffin/High-Density Polyethylene/Expanded Graphite/Epoxy Resin Composite PCMs for Thermal Energy Storage

Experimental study on preparation and thermal storage properties of expanded graphite/paraffin wax as a shape-stabilized phase change material

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Improvement of thermal cycle stability of paraffin/expanded graphite composite phase change materials and its application in thermal management

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

Preparation and characterization of paraffin/expanded graphite composite phase change materials with high thermal conductivity

Thermal and Mechanical Robust Solid‐Solid Phase Change Materials Enabled by Reactive Crosslinkable Poly(Ethylene Glycol)s via Facile Thiol‐Ene Photo‐Click Chemistry

Enhanced thermal conductivity of form-stable composite phase-change materials with graphite hybridizing expanded perlite/paraffin

Enhanced Thermal Conductivity of Composite Phase Change Materials Based on Carbon Modified Expanded Perlite

Constructing heat conduction path and flexible support skeleton for PEG-based phase change composites through salt template method

Tailoring Thermal Properties Via Synergistic Effect in a Multifunctional Phase Change Composite Based on Methyl Stearate