Abstract:Titanium phosphate (TiP) exhibits preferable sorption toward lead ion in the presence of competing calcium ions at high levels, however, it is present as fine or ultrafine particles and cannot be directly employed in fixed-bed or any flow-through systems due to the excessive pressure drop and poor mechanical strength. In the present study a new hybrid sorbent TiP-001 was fabricated by impregnating titanium phosphate (TiP) nanoparticles onto a strongly acidic cation exchanger D-001 for enhanced lead removal from waters. D-001 was selected as a host material mainly because of the Donnan membrane effect resulting from the immobilized sulfonic acid groups bound on the exchanger matrix, which would enhance permeation of the target metal cation prior to effective sequestration. TiP-001 was characterized by transmission electron micrograph (TEM), X-ray diffraction (XRD), and pH-titration. Batch and column sorption onto TiP-001 was assayed to evaluate its performance as compared to the host exchanger D-001. Lead sorption onto TiP-001 is a pH-dependent process due to the ion-exchange nature, and its sorption kinetics follows the pseudo-second-order model well. Compared to D-001, TiP-001 displays highly selective lead sorption in the presence of competing calcium cations at concentration of several orders higher than the target metal. Fixed-bed sorption of a synthetic feeding solution indicates that lead retention by TiP-001 results in a conspicuous decrease of this toxic metal from 0.50 to below 0.010 mg/L (drinking water standard recommended by WHO). Moreover, its feasible regeneration by dilute HCl solution also favors TiP-001 to be a feasible sorbent for enhanced lead removal from water.

Efficient removal of lead ions from aqueous solution using C-TiO<sub>2</sub> adsorbent

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Adsorption of Pb2+ from Aqueous Solution by Black TiO2-x Nanoparticles with Enhanced Surface Area and Porosity

Removal of Pb(II) from Aqueous Solution on Chitosan/tio2 Hybrid Film

Removal of Lead(ii) from Aqueous Solution by Adsorption Onto Manganese Oxide-Coated Carbon Nanotubes

Two-dimensional Titanium Carbide MXene Produced by Ternary Cations Intercalation Via Structural Control with Angstrom-Level Precision

Adsorption of Pb(II) from an Aqueous Solution by Titanium Dioxide/Carbon Nanotube Nanocomposites: Kinetics, Thermodynamics, and Isotherms

Adsorption Study of Pb(II) by Chemically Modified Cattail Stem

Impregnating Titanium Phosphate Nanoparticles Onto a Porous Cation Exchanger for Enhanced Lead Removal from Waters.

Mechanistic Study of Pb(II) Removal by TiO<sub>2</sub> and Effect of PO<sub>4</sub>

Preparation of Triethanolamine Functionalized Carbon Nanotube for Aqueous Removal of Pb(Ii)

Efficient removal of Pb(II) by Ti3C2Tx powder modified with a silane coupling agent

Mesoporous TiO2 Sphere with High Adsorbability: Adsorption Behavior Study of Pb(II) from Water

A Post-Functional Ti-based MOFs Composite for Selective Removal of Pb (II) from Water

Biosorption of Lead from Aqueous Solutions by Ion-Imprinted Tetraethylenepentamine Modified Chitosan Beads.

Removal of Pb(II) from Aqueous Solution Using Dithiocarbamate Modified Chitosan Beads with Pb(II) As Imprinted Ions

High Adsorption Performance for Trace Lead (II) Cation from Sewage by Fe/Cu Metal Organic Nanosheets Modified with Terephthalic Acid.

Efficient Removal of Pb(II) Ion Using Tio2/Zno/Sio2 Nanocomposite from Aqueous Solutions Via Adsorption-Photocatalysis Process

Efficient removal of Pb(II) from aqueous solution by a novel ion imprinted magnetic biosorbent: Adsorption kinetics and mechanisms

Facile preparation of biosurfactant-functionalized Ti2CTX MXene nanosheets with an enhanced adsorption performance for Pb(II) ions

Adsorption of Pb(II) and Cd(II) from aqueous solutions using titanate nanotubes prepared via hydrothermal method