Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The laser welding of Cu–Al alloys for battery applications in the automotive industry presents significant challenges due to the high reflectivity of copper. Inadequate bonding and low mechanical strength may occur when the laser radiation is directed toward the copper side in an overlap configuration welding. To tackle these challenges, a laser surface treatment technique is implemented to enhance the absorption characteristics and overcome the reflective nature of the copper material. However, elevating the surface roughness and heat-energy input over threshold values leads to heightened temperature and extreme weld. This phenomenon escalates the formation of detrimental intermetallic compounds (IMC), creating defects like cracks and porosity. Metallurgical analysis, which is time-consuming and expensive, is usually used in studies to detect these phases and defects. However, to comprehensively evaluate the weld quality and discern the impact of surface structure, adopting a more innovative approach that replaces conventional cross-sectional metallography is essential. This article proposes a model based on the image feature extraction of the welds to study the effect of the laser-based structure and the other laser parameters. It can detect defects and identify the weld quality by weld classification. However, due to the complexity of the photo features, the system requires image processing and a convolutional neural network (CNN). Results show that the predictive model based on trained data can detect different weld categories and recognize unstable welds. The project aims to use a monitoring model to guarantee optimized and high-quality weld series production. To achieve this, a deeper study of the parameters and the microstructure of the weld is utilized, and the CNN model analyzes the features of 1310 pieces of weld photos with different weld parameters.

Root Hump Defect Monitoring of High Power Fiber Laser Thick Plate Welding Based on the Character of Keyhole and Molten Pool

Investigation of Weld Root Defects in High-Power Full-Penetration Laser Welding of High-Strength Steel

Understanding root humping in high-power laser welding of stainless steels: a combination approach

A Vision Based Method for Humping Detection in High-Speed Laser Welding

Measurement of pulsed laser welding penetration based on keyhole dynamics and deep learning approach

Welding Quality Monitoring of High Frequency Straight Seam Pipe Based on Image Feature

Penetration prediction of narrow-gap laser welding based on coaxial high dynamic range observation and machine learning

Deep Learning-Based Defects Detection in Keyhole TIG Welding with Enhanced Vision

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Numerical Analysis of Welding Defects in the Horizontal Position Laser-Metal Inert Gas Hybrid Fillet Welding

Defect monitoring of high-power laser-arc hybrid welding process based on an improved channel attention convolutional neural network

Monitoring of High-Speed Laser Welding Process Based on Vapor Plume

In situ dual-functional water purification with simultaneous oil removal and visible light catalysis.

Vision sensing system and detection of backside image of molten pool in laser-MIG hybrid welding

Detection of Backside Width of Molten Pool in Laser-MIG Hybrid Welding

DBN-based online identification of porosity regions during laser welding of aluminum alloys using coherent optical diagnosis

Data-driven analysis of surface roughness influence on weld quality and defect formation in laser welding of Cu–Al

Penetration State Recognition during Laser Welding Process Control Based on Two-Stage Temporal Convolutional Networks

Prediction of penetration based on plasma plume and spectrum characteristics in laser welding

Simulation Study on Weld Formation in Full Penetration Laser + MIG Hybrid Welding of Copper Alloy

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding