Abstract:High cooling rates within the selective laser melting (SLM) process can generate large residual stresses within fabricated components. Understanding residual stress development in the process and devising methods for in-situ reduction continues to be a challenge for industrial users of this technology. Computationally efficient FEA models representative of the process dynamics (temperature evolution and associated solidification behaviour) are necessary for understanding the effect of SLM process parameters on the underlying phenomenon of residual stress build-up. The objective of this work is to present a new modelling approach to simulate the temperature distribution during SLM of Ti6Al4V, as well as the resulting melt-pool size, solidification process, associated cooling rates and temperature gradients leading to the residual stress build-up. This work details an isotropic enhanced thermal conductivity model with the SLM laser modelled as a penetrating volumetric heat source. An enhanced laser penetration approach is used to account for heat transfer in the melt-pool due to Marangoni convection. Results show that the developed model was capable of predicting the temperature distribution in the laser/powder interaction zone, solidification behaviour, the associated cooling rates, melt-pool width (with 14.5% error) and melt-pool depth (with 3% error) for SLM Ti6Al4V. The model was capable of predicting the differential solidification behaviour responsible for residual stress build-up in SLM components. The model-predicted trends in cooling rates and temperature gradients for varying SLM parameters correlated with experimentally measured residual stress trends. Thus, the model was capable of accurately predicting the trends in residual stress for varying SLM parameters. This is the first work based on the enhanced penetrating volumetric heat source, combined with an isotropic enhanced thermal conductivity approach. The developed model was validated by comparing FEA melt-pool dimensions with experimental melt-pool dimensions. Secondly, the model was validated by comparing the temperature evolution along the laser scan path with experimentally measured temperatures from published literature.

The Residual Stress Distribution of Ti-6Al-4V Thin Wall in the Selective Laser Melting

A Thermo-Metallurgical-mechanical Model for Selective Laser Melting of Ti6Al4V

Comprehensive Investigation of Residual Stress in Selective Laser Melting Based on Cohesive Zone Model

Study of residual stress in selective laser melting of Ti6Al4V

Numerical Simulation of Stress Evolution of Thin-Wall Titanium Parts Fabricated by Selective Laser Melting

Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach

Role of Scanning Strategy on Residual Stress Distribution in Ti-6Al-4V Alloy Prepared by Selective Laser Melting

Effect of Solid-State Phase Transformation on Residual Stress of Selective Laser Melting Ti6Al4V

Finite Element Analysis of Thermal Stress and Thermal Deformation in Typical Part during SLM

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Prediction of residual stress and deformation based on the temperature distribution in 3D-printed parts

Analysis of the Residual Stress in Additive Manufacturing of Ti-6Al-4V

Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling

Numerical investigation of residual stresses in thin-walled additively manufactured structures from selective laser melting

Evolution of Cyclic Thermal Stress in Selective Laser Melting of 316L Stainless Steel: a Realistic Numerical Study with Experimental Verification

FEM Analysis of Thermal and Residual Stress Profile in Selective Laser Melting of 316L Stainless Steel

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Spatiotemporal Variations of Residual Stresses During Multi-Track and Multi-Layer Deposition for Laser Powder Bed Fusion of Ti-6Al-4V

A Study on the Residual Stress During Selective Laser Melting (SLM) of Metallic Powder

A Simulation Study on the Effect of Residual Stress on the Multi-Layer Selective Laser Melting Processes Considering Solid-State Phase Transformation