Abstract:The reduction of Ge vacancies is realized in GeTe thermoelectrics simply by annealing at temperatures below phase‐transition temperature, instead of counter‐doping and hetero‐alloying, leading to a record high‐carrier mobility and improved thermal stability. This work highlights the importance of understanding and regulating the intrinsic vacancy for developing high‐performance thermoelectrics. GeTe is a very promising thermoelectric material, but the presence of massive intrinsic Ge vacancies leads to an overhigh hole concentration and poor thermal stability. Counter doping is commonly employed to reduce the hole concentration, which, however, unavoidably deteriorates the carrier mobility. Here, it is found that the intrinsic hole concentration in the rhombohedral phase is much lower than that in the cubic phase, owing to the higher formation energy of Ge vacancy in the former. With this recognition, the hole concentration of GeTe can be tuned to its optimum value simply by annealing below the phase transition temperature. As a result, "compositional plainification" is realized in the high‐performance GeTe‐based thermoelectrics with significantly reduced amounts of counter dopants and hetero‐alloys. A high carrier mobility of 150 cm2 V−1 s−1 is realized in GeTe at 300 K, which is much higher than that in conventional counter‐doped ones (≤60 cm2 V−1 s−1). More importantly, GeTe‐based compounds, with suppressed intrinsic vacancies, exhibit good thermal stability and reproducibility of thermoelectric performance. A high peak figure of merit, zT, of 2.14 at 670 K is obtained in Ge0.93Bi0.03Pb0.04Te. This work highlights the importance of understanding and regulating the intrinsic vacancy for high‐performance GeTe thermoelectrics.

High Carrier Mobility and High Figure of Merit in the CuBiSe2 Alloyed GeTe

High Carrier Mobility and High Figure of Merit in the CuBiSe 2 Alloyed GeTe

Interstitial Cu: An Effective Strategy for High Carrier Mobility and High Thermoelectric Performance in GeTe

Electrical and Thermal Transport Properties of Ge1–xPbxCuySbyTeSe2y

Modifying Roles of CuSbSe2 in Realizing High Thermoelectric Performance of GeTe

High thermoelectric performance in GeTe with compositional insensitivity

High Thermoelectric Performance Achieved in Sb-Doped GeTe by Manipulating Carrier Concentration and Nanoscale Twin Grains

High near-room temperature figure of merit of n-type Bi2GeTe4-based thermoelectric materials via a stepwise optimization of carrier concentration

Thermoelectric Performance Optimization and Phase Transition of GeTe by Alloying with Orthorhombic CuSbSe 2

Synergistically Optimized Thermal Conductivity and Carrier Concentration in GeTe by Bi–Se Codoping

Simultaneous Suppression of Phonon Transport and Carrier Concentration for Efficient Rhombohedral GeTe Thermoelectric

Stabilizing the Optimal Carrier Concentration in Al/Sb-Codoped GeTe for High Thermoelectric Performance

Medium-temperature thermoelectric GeTe: vacancy suppression and band structure engineering leading to high performance

Enhancing thermoelectric performance in GeTe through Ge enrichment regulation and AgCuTe alloying

Simultaneous Optimization of Carrier Concentration and Alloy Scattering for Ultrahigh Performance GeTe Thermoelectrics

Achieving High Carrier Mobility And Thermal Stability in Plainified Rhombohedral GeTe Thermoelectric Materials with zT > 2

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in GeTe Alloys Via Introducing Cu2Te Nanocrystals and Resonant Level Doping.

Anionic regulation and valence band convergence boosting the thermoelectric performance of Se-alloyed GeSb 2 Te 4 single crystal

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in GeTe Alloys via Introducing Cu 2 Te Nanocrystals and Resonant Level Doping

Outstanding CdSe with Multiple Functions Leads to High Performance of GeTe Thermoelectrics

Intrinsic vacancy suppression and band convergence to enhance thermoelectric performance of (Ge, Bi, Sb)Te crystals