Abstract:A 2D electromagnetic-thermal coupled numerical model has been developed using the finite element method and validated against experimental data to investigate a superconducting machine featuring high-temperature superconducting (HTS) tape stacks and cryocooled iron cores. The HTS stacks are transformed into trapped field stacks (TFSs) through pulsed field magnetisation (PFM), generating rotor fields. After PFM, the superconducting motor operates on the same principle as permanent magnet synchronous motors. This study explores the behaviour of HTS stacks by altering the stack's layer number from one to nine and adjusting the pulsed current amplitude from 250 A to 1000 A. The primary objective of this paper is to identify the optimal combination of pulsed current amplitudes and TFS layer numbers for achieving maximum magnetisation fields. The secondary objective is to evaluate the overall losses in both superconducting and non-superconducting parts of the machine during magnetisation, including heat generated in various layers of the TFS, and losses in the motor's active materials (copper windings and iron cores). Two motor configurations were proposed, and two calculation methods using linear interpolation of iron losses and steel grades were introduced to estimate the iron losses for the studied iron material, M270-35A. This pioneering study is expected to serve as a valuable reference for loss analyses and structural design considerations in developing superconducting machines.

Suppression of Winding AC losses in High-Speed Permanent Magnet Machines by Novel Transposition Technologies

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

A New End Windings Transposition to Reduce Windings Eddy Loss for 2 MW Direct Drive Multi-Unit PMSM

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Electromagnetic Design and Losses Analysis of a High-Speed Permanent Magnet Synchronous Motor with Toroidal Windings for Pulsed Alternator

Winding Loss Reduction Based on the Even Magnetomotive Force in the Wide-Range RDCX Converter for OBC

Analysis of Low Harmonic Windings for High-Speed Permanent Magnet Machines

Improvements in Permanent Magnet Synchronous Machines with Delta-Connected Winding

Study on Electromagnetic Losses in High-speed Permanent Magnet Brushless Machines-the State of the Art

Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines

AC Loss Analysis and Measurement of a Hybrid Transposed Hairpin Winding for EV Traction Machines.

AC Loss Analytic Method and Optimization of Litz Winding for High-Speed Electrical Machines

Comprehensive Analysis of the AC Copper Loss for High Speed PM Machine With Form-Wound Windings

Study on AC Copper Losses in an Air-Cored Axial Flux Permanent Magnet Electrical Machine with Flat Wires

A Novel High-Speed Permanent Magnet Machine with Dual Semi-Cage Winding

Investigation of a Parallel Hybrid Excitation Machine with Auxiliary Winding for Loss Reduction in Flux-Weakening Operation

Comparison of AC Losses in the Winding of Electrical Machines with Fixed Strands Positions, Fixed Conductor Shapes and Random Winding

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores