Light, Sound and Microwave Induced Modulation in Microcavity Brillouin Laser

Jianfan Yang,Tian Qin,Wenjie Wan

DOI: https://doi.org/10.1364/nlo.2019.nm3b.3

2019-01-01

Nonlinear Optics

Abstract:We experimentally observe light, sound and microwave induced modulation in an optomechanical microcavity Brillouin laser system. Unique applications as dual-channel communication and microwave subwavelength imaging have been demonstrated in such hybrid platform.

What problem does this paper attempt to address?

Multiphysical sensing of light, sound and microwave in a microcavity Brillouin laser

Jianfan Yang,Tian Qin,Fangxing Zhang,Xianfeng Chen,Xiaoshun Jiang,Wenjie Wan

DOI: https://doi.org/10.1515/nanoph-2020-0176

IF: 7.5

2020-06-24

Nanophotonics

Abstract:Abstract Light, sound, and microwave are important tools for many interdisciplinary applications in a multi-physical environment, and they usually are inefficient to be detected simultaneously in the same physical platform. However, at the microscopic scale, these waves can unexpectedly interact with the same microstructure through resonant enhancement, making it a unique hybrid micro-system for new applications across multiple physical channels. Here we experimentally demonstrate an optomechanical microdevice based on Brillouin lasing operation in an optical microcavity as a sensitive unit to sense external light, sound, and microwave signals in the same platform. These waves can induce modulations to the microcavity Brillouin laser (MBL) in a resonance-enhanced manner through either the pressure forces including radiation pressure force or thermal absorption, allowing several novel applications such as broadband non-photovoltaic detection of light, sound-light wave mixing, and deep-subwavelength microwave imaging. These results pave the way towards on-chip integrable optomechanical solutions for sensing, free-space secure communication, and microwave imaging.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
Theoretical Modelling of Single-Mode Lasing in Microcavity Lasers Via Optical Interference Injection.

Ling-Fang Wang,Yun-Ran Wang,Henry Francis,Ri Lu,Ming-Jun Xia,Feng Liu,Mark Hopkinson,Chao-Yuan Jin

DOI: https://doi.org/10.1364/oe.389860

IF: 3.8

2020-01-01

Optics Express

Abstract:The effective manipulation of mode oscillation and competition is of fundamental importance for controlling light emission in semiconductor lasers. Here we develop a rate equation model which considers the spatially modulated gain and spontaneous emission, which are inherently governed by the ripple of the vacuum electromagnetic field in a Fabry-Pérot (FP) microcavity. By manipulating the interplay between the spatial oscillation of the vacuum field and external optical injection via dual-beam laser interference, single longitudinal mode operation is observed in a FP-type microcavity with a side mode suppression ratio exceeding 40 dB. An exploration of this extended rate equation model bridges the gap between the classical model of multimode competition in semiconductor lasers and a quantum-optics understanding of radiative processes in microcavities.
A novel-configuration multi-wavelength Brillouin erbium fiber laser and its application in switchable high-frequency microwave generation

J. Fu,D. Chen,B. Sun,S. Gao

DOI: https://doi.org/10.1134/S1054660X10190047

IF: 1.2

2010-01-01

Laser Physics

Abstract:A novel configuration of compound-cavity multi-wavelength Brillouin erbium fiber laser is proposed and experimentally demonstrated. With an incident optical carrier power of 8 dBm, at least 14 lasing lines are obtained with a wavelength spacing of ∼0.08 nm. Stability and power uniformity of the multi-wave-length lasing are ensured by the flat hybrid gain of Brillouin and erbium, the compound-cavity structure, and the four-wave mixing suppression using a long (10 km) single-mode fiber. A stable and frequency-switchable microwave can be achieved by incorporating a fiber Bragg grating filter to select the desired n th-order Stokes wave and beating it with the optical carrier at a photodetector. In our experiment, the 1st-4th-order Stokes waves are filtered respectively and hence a high-quality microwave with a switchable frequency from ∼10 to ∼40 GHz and a tuning step of ∼10 GHz is achieved. The signal-to-noise ratio is measured to be >25 dB.
Brillouin Optomechanics in Coupled Silicon Microcavities

Yovanny A. V. Espinel,Felipe G. S. Santos,Gustavo O. Luiz,Thiago P. M. Alegre,Gustavo S. Wiederhecker

DOI: https://doi.org/10.1038/srep43423

2016-09-30

Abstract:The simultaneous control of optical and mechanical waves has enabled a range of fundamental and technological breakthroughs, from the demonstration of ultra-stable frequency reference devices to the exploration of the quantum-classical boundaries in laser-cooling experiments. More recently, such an opto-mechanical interaction has been observed in integrated nano-waveguides and microcavities in the Brillouin regime, where short-wavelength mechanical modes scatters light at several GHz. Here we engineer coupled optical microcavities spectra to enable a low threshold excitation of mechanical travelling-wave modes through backward stimulated Brillouin scattering. Exploring the backward scattering we propose microcavity designs supporting super high frequency modes ($\sim25$ GHz) an large optomechanical coupling rates ($g_0/2\pi \sim 50$ kHz).

Optics
Self-pulsations in a Microcavity Brillouin Laser.

Yingchun Qin,Shulin Ding,Shujian Lei,Jie Liu,Yan Bai,Menghua Zhang,Yuhang Li,Jianming Wen,Xiaoshun Jiang,Min Xiao

DOI: https://doi.org/10.1364/ol.440677

2022-01-01

Abstract:We demonstrate a new, to the best of our knowledge, kind of self-pulsation in a microcavity Brillouin laser. This specific self-pulsation is generated by the interplay between the Brillouin lasing and the thermo-optic effect in an optical microcavity. Intriguingly, the self-pulsation behaviors are simultaneously present in both forward input pump and backward Brillouin lasing emission. By developing a coupled-mode theory, our numerical simulations display an excellent agreement with the experimental results.
Laser Optomechanics

Weijian Yang,S. Adair Gerke,Kar Wei Ng,Yi Rao,Christopher Chase,Connie J. Chang-Hasnain

DOI: https://doi.org/10.1038/srep13700

2015-02-27

Abstract:Cavity optomechanics explores the coupling between the optical field and the mechanical oscillation to induce cooling and regenerative oscillation in a mechanical oscillator. So far, optomechanics relies on the detuning between the cavity and an external pump laser, where the laser acts only as a power supply. Here, we report a new scheme with mutual coupling between a mechanical oscillator that supports a mirror of a vertical-cavity surface-emitting laser (VCSEL) and the optical field, greatly enhancing the light-matter energy transfer. In this work, we used an ultra-light-weight (130 pg) high-contrast-grating (HCG) mirror in a VCSEL, whose reflectivity spectrum is designed to facilitate strong optomechanical coupling, to demonstrate optomechanically-induced regenerative oscillation of the laser optomechanical cavity with > 550 nm self-oscillation amplitude of the micro-mechanical oscillator, two to three orders of magnitude larger than typical. This new scheme not only offers an efficient approach for high-speed wavelength-swept sources, but also has far-reaching significance in the realization of quantum entanglement of macroscopic objects and ultrasensitive measurement of displacements and forces.

Optics
Microwave/Millimeter-Wave Generation Using Multi-Wavelength Photonic Crystal Fiber Brillouin Laser

G. F. Shen,X. M. Zhang,H. Chi,X. F. Jin

DOI: https://doi.org/10.2528/pier07112202

2008-01-01

Abstract:An all-optical microwave generation using a multi-wavelength photonic crystal fiber Brillouin laser is presented. A highly nonlinear photonic crystal fiber with the length of 25m is used as Brillouin gain medium. A Fabry-Perot cavity with two fiber Bragg gratings as reflectors are designed in order to enhance the Brillouin conversion efficiency. The fiber Bragg gratings can be used to selectively excite the jth-order Stokes' wave and suppress other order Stokes' waves. The mechanism for microwave/millimeter-wave generation is theoretically analyzed. In the experiment, both 9.788 GHz and 19.579 GHz microwave signals are achieved through mixing the pump wave with the first-order and the second-order Stokes' waves.
Taming Brillouin Optomechanics Using Supermode Microresonators

Min Wang,Zhi-Gang Hu,Chenghao Lao,Yuanlei Wang,Xing Jin,Xin Zhou,Yuechen Lei,Ze Wang,Wenjing Liu,Qi-Fan Yang,and Bei-Bei Li

DOI: https://doi.org/10.1103/physrevx.14.011056

2024-03-27

Physical Review X

Abstract:Electrostrictive Brillouin scattering provides a ubiquitous mechanism to optically excite high-frequency ( >10 GHz ), bulk acoustic phonons that are robust to surface-induced losses. Resonantly enhancing such photon-phonon interactions in high- Q microresonators has spawned diverse applications spanning microwave to optical domains. However, tuning both the pump and scattered waves into resonance usually comes with the cost of photon confinement or modal overlap, leading to limited optomechanical coupling. Here, we introduce Bragg scattering to realize strong bulk optomechanical coupling in the same spatial modes of a micron-sized supermode microresonator. A single-photon optomechanical coupling rate up to 12.5 kHz is demonstrated, showing more than 10 times improvement than other devices. Low-threshold phonon lasing and optomechanical strong coupling are also observed for the 10.2-GHz mechanical mode. Our work establishes a compact and efficient paradigm to optically control bulk acoustic phonons, paving the way toward optomechanical coupling at the single-photon level and providing a powerful engine for large-scale integration of quantum networks in which quantum states are massively transferred and stored. https://doi.org/10.1103/PhysRevX.14.011056 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

physics, multidisciplinary
Experimental Demonstration of Subnano-Second Wavelength Switching in V-Coupled-Cavity Semiconductor Laser

Shanli Guo,Jianjun Meng,Lei Wang,Li Zou,Hongli Zhu,Jian-Jun He

DOI: https://doi.org/10.1364/acpc.2012.as4h.6

2012-01-01

Abstract:The tuning characteristics based on both free carrier dispersion and thermal effect induced by the tuning current of a V-coupled-cavity laser are investigated. Sub-naosecond and tens of microseconds wavelength switching time between two neighboring channels are measured, respectively.
Novel Semiconductor Lasers and Integrated Photonic Devices

Jian-Jun He,Jialiang Jin,Dekun Liu,Lei Jin,Min Lou,Tingting Yu,Lei Wang

DOI: https://doi.org/10.1117/12.873899

2010-01-01

Abstract:Novel design concepts, simulations and experimental results on semiconductor lasers and integrated photonic devices are presented, for both telecom and biomedical applications. It is shown that the Vernier effect can be used to increase the tuning range of a digitally wavelength-switchable semiconductor laser, and to increase the sensitivity of passive and active waveguide sensors. The wavelength switchable laser based on V-coupled cavity has a large tolerance on the accuracy of the setting current. For the middle 50% of the current range corresponding to a wavelength channel, the wavelength varies by only ±0.01nm from the set value for 0.8nm channel spacing and the SMSR is maintained above 38dB. Wavelength switching over 8 consecutive channels is experimentally demonstrated using a single electrode control. The wavelength shift sensitivity of a waveguide sensor based on two cascaded microring resonators with Vernier effect can reach 1300nm/RIU, over an order of magnitude higher than a single ring sensor. A monolithic integrated intracavity biosensor based on V-coupled cavity laser is also proposed and analyzed. By simply detecting the power ratio of two output ports, a refractive index sensitivity in the order of 10-8 RIU can be achieved thanks to the intracavity sensing mechanism and the Vernier effect.
Optical Generation of Microwave/millimeter‐wave Based on Brillouin‐Erbium Fiber Laser

Lan Liu,Yichun Shen,Shilie Zheng,Xiaofeng Jin,Hao Chi,Xianmin Zhang

DOI: https://doi.org/10.1002/mop.26118

IF: 1.311

2011-01-01

Microwave and Optical Technology Letters

Abstract:A novel system configuration for optical generation of microwave/millimeter-wave (mm-wave), which is realized through Brillouin-Erbium fiber laser (BEFL), is investigated. The microwave/mm-wave is generated by the mixing of the nth-order Stokes wave and the pump wave on the high-speed photodetector. The nth-order Stokes wave is generated in the BEFL and filtered out by fiber Bragg grating. The experiments are carried out based on such configuration, and experimental results verify the validity of it. (C) 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53: 1761-1763, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26118
Soliton Microcombs Multiplexing Using Intracavity-Stimulated Brillouin Lasers

Hao Zhang,Teng Tan,Hao-Jing Chen,Yan Yu,Wenting Wang,Bing Chang,Yupei Liang,Yanhong Guo,Heng Zhou,Handing Xia,Qihuang Gong,Chee Wei Wong,Yunjiang Rao,Yun-Feng Xiao,and Baicheng Yao

DOI: https://doi.org/10.1103/physrevlett.130.153802

IF: 8.6

2023-04-13

Physical Review Letters

Abstract:Solitons in microresonators have spurred intriguing nonlinear optical physics and photonic applications. Here, by combining Kerr and Brillouin nonlinearities in an over-modal microcavity, we demonstrate spatial multiplexing of soliton microcombs under a single external laser pumping operation. This demonstration offers an ideal scheme to realize highly coherent dual-comb sources in a compact, low-cost and energy-efficient manner, with uniquely low beating noise. Moreover, by selecting the dual-comb modes, the repetition rate difference of a dual-comb pair could be flexibly switched, ranging from 8.5 to 212 MHz. Beyond dual-comb, the high-density mode geometry allows the cascaded Brillouin lasers, driving the co-generation of up to 5 space-multiplexing frequency combs in distinct mode families. This Letter offers a novel physics paradigm for comb interferometry and provides a widely appropriate tool for versatile applications such as comb metrology, spectroscopy, and ranging. https://doi.org/10.1103/PhysRevLett.130.153802 © 2023 American Physical Society

physics, multidisciplinary
Stimulated Forward Brillouin Scattering in Subwavelength Silicon Membranes

Paula Nuño Ruano,Jianhao Zhang,David González-Andrade,Daniele Melati,Eric Cassan,Pavel Cheben,Laurent Vivien,Norberto Daniel Lanzillotti-Kimura,Carlos Alonso-Ramos

2024-02-24

Abstract:On-chip Brillouin scattering plays a key role in numerous applications in the domain of signal processing and microwave photonics due to the coherent bidirectional coupling between near-infrared optical signals and GHz mechanical modes, which enables selective amplification and attenuation with remarkably narrow linewidths, in the kHz to MHz range. Subwavelength periodic nanostructures provide precise control of the propagation of light and sound in silicon photonic circuits, key to maximize the efficiency of Brillouin interactions. Here, we propose and demonstrate a new subwavelength waveguide geometry allowing independent control of optical and mechanical modes. Two silicon lattices are combined, one with a subwavelength period for the light and one with a total bandgap for the sound, to confine optical and mechanical modes, respectively. Based on this approach, we experimentally demonstrate optomechanical coupling between near-infrared optical modes and GHz mechanical modes with with 5-8 MHz linewidth and a coupling strength of GB = 1360 1/(W m). A Stokes gain of 1.5 dB, and anti-Stoke loss of -2 dB are observed for a 6 mm-long waveguide with 35.5 mW of input power. We show tuning of the mechanical frequency between 5 and 8 GHz by geometrical optimization, without loss of the optomechanical coupling strength.

Optics
Proposal for Brillouin microwave-to-optical conversion on a chip

Yuan-Hao Yang,Jia-Qi Wang,Xin-Biao Xu,Ming Li,Yan-Lei Zhang,Xiaoxuan Pan,Lintao Xiao,Weiting Wang,Guang-can Guo,Luyan Sun,Chang-ling Zou

DOI: https://doi.org/10.1364/ome.534817

2024-09-21

Optical Materials Express

Abstract:Yuan-Hao Yang, Jia-Qi Wang, Xin-Biao Xu, Ming Li, Yan-Lei Zhang, Xiaoxuan Pan, Lintao Xiao, Weiting Wang, Guang-can Guo, Luyan Sun, Chang-ling Zou We propose a novel scheme for efficient and low-noise microwave-to-optical quantum transduction based on cavity-enhanced Brillouin ... [Opt. Mater. Express 14, 2400-2412 (2024)]

materials science, multidisciplinary,optics
Electromechanical Brillouin scattering in integrated optomechanical waveguides

Qiyu Liu,Huan Li,Mo Li

DOI: https://doi.org/10.48550/arXiv.1905.03810

2019-05-10

Abstract:In the well-known stimulated Brillouin scattering (SBS) process, spontaneous acoustic phonons in materials are stimulated by laser light and scatter the latter into a Stokes sideband. SBS becomes more pronounced in optical fibers and has been harnessed to amplify optical signals and even achieve lasing. Exploitation of SBS has recently surged on integrated photonics platforms as simultaneous confinement of photons and phonons in waveguides leads to drastically enhanced interaction. Instead of being optically stimulated, coherent phonons can also be electromechanically excited with very high efficiency as has been exploited in radiofrequency acoustic filters. Here, we demonstrate electromechanically excited Brillouin scattering in integrated optomechanical waveguides made of piezoelectric material aluminum nitride (AlN). Acoustic phonons of 16 GHz in frequency are excited with nanofabricated electromechanical transducers to scatter counter-propagating photons in the waveguide into a single anti-Stokes sideband. We show that phase-matching conditions of Brillouin scattering can be tuned by varying both the optical wavelength and the acoustic frequency to realize tunable single-sideband modulation. Combining Brillouin scattering photonics with nanoelectromechanical systems, our approach provides an efficient interface between microwave and optical photons that will be important for microwave photonics and potentially quantum transduction.

Optics,Quantum Physics
Pump-locked microcavity Brillouin laser

Yuqin Mao,Chaoze Zhang,Ligang Huang,Lei Gao,Yujia Li,Leilei Shi,Guolu Yin,Chaoyang Gong,Tao Zhu

2024-04-15

Abstract:Microcavity-based microlasers are the kernel light sources for integrating photonics and optoelectronics. The traditional pump light frequency locking mainly utilizes a complex system with optoelectronic feedback, which requires a high-cost narrow-linewidth pump laser and limits the application of microlasers in integrated optoelectronic systems. We propose to utilize Rayleigh scattering of microcavities to lock the frequency of the pump laser to the resonant frequency of the laser microcavity with an all-optical method. While compressing the linewidth of the pump laser, it can greatly improve the long-term stability of the optically pumped microcavity laser. In the experiment, the linewidth of the semiconductor pump laser is compressed from the MHz level to the kHz level. The microcavity Brillouin laser achieves an ultra-narrow intrinsic linewidth of 100 Hz, with an ultra-low frequency noise of 35 Hz2/Hz. The constructed microlaser obtains a locking time up to 1 hour, which does not require any temperature control or vibration isolation of the laser system. This work is the first demonstration to achieve an optically pump-locked microcavity Brillouin laser, which provides a stable and reliable low-cost experimental platform for ultra-narrow linewidth lasers, precision laser sensors, microwave-photonic signal synthesizer, and optomechanical systems.

Optics
Electrically interfaced Brillouin-active waveguide for multi-domain transduction

Yishu Zhou,Freek Ruesink,Margaret Pavlovich,Ryan Behunin,Haotian Cheng,Shai Gertler,Andrew L. Starbuck,Andrew J. Leenheer,Andrew T. Pomerene,Douglas C. Trotter,Katherine M. Musick,Michael Gehl,Ashok Kodigala,Matt Eichenfield,Anthony L. Lentine,Nils Otterstrom,Peter Rakich

2023-07-16

Abstract:New strategies to convert signals between optical and microwave domains could play a pivotal role in advancing both classical and quantum technologies. Through recent studies, electro-optomechanical systems have been used to implement microwave-to-optical conversion using resonant optical systems, resulting in transduction over limited optical bandwidth. Here, we present an optomechanical waveguide system with an integrated piezoelectric transducer that produces electro-optomechanical transduction over a wide optical bandwidth through coupling to a continuum of optical modes. Efficient electromechanical and optomechanical coupling within this system enables bidirectional optical-to-microwave conversion with a quantum efficiency of up to $-$54.16 dB. When electrically driven, this system produces a low voltage acousto-optic phase modulation over a wide ($>$100 nm) wavelength range. Through optical-to-microwave conversion, we show that the amplitude-preserving nature inherent to forward Brillouin scattering is intriguing and has the potential to enable new schemes for microwave photonic signal processing. We use these properties to demonstrate a multi-channel microwave photonic filter by transmitting an optical signal through a series of electro-optomechanical waveguide segments having distinct resonance frequencies. Building on these demonstrations, such electro-optomechanical systems could bring flexible strategies for modulation, channelization, and spectrum analysis in microwave photonics.

Optics,Applied Physics
Controllable Dual-Soliton Microcombs Using Brillouin Excitation

Hao Zhang,Teng Tan,Zhaoyu Li,Qi-Fan Yang,Chee Wei Wong,Yunjiang Rao,Baicheng Yao

DOI: https://doi.org/10.1364/cleo_at.2022.jw3b.160

2022-01-01

Abstract:A single pump generates counter-propagating Brillouin laser, enabling dual-soliton excitation in an over-modal microresonator. Via tuning the pump detuning, the dual-soliton demonstrates tunable repetition offset ranging from 8.4 MHz to 367 MHz.
Controlled lasing from active optomechanical resonators

T. Czerniuk,C. Brueggemann,J. Tepper,S. Brodbeck,C. Schneider,M. Kamp,S. Hoefling,B. A. Glavin,D. R. Yakovlev,A. V. Akimov,M. Bayer

DOI: https://doi.org/10.48550/arXiv.1401.4359

2014-01-17

Mesoscale and Nanoscale Physics

Abstract:Planar microcavities with distributed Bragg reflectors (DBRs) host, besides confined optical modes, also mechanical resonances due to stop bands in the phonon dispersion relation of the DBRs. These resonances have frequencies in the sub-terahertz (10E10-10E11 Hz) range with quality factors exceeding 1000. The interaction of photons and phonons in such optomechanical systems can be drastically enhanced, opening a new route toward manipulation of light. Here we implemented active semiconducting layers into the microcavity to obtain a vertical-cavity surface-emitting laser (VCSEL). Thereby three resonant excitations -photons, phonons, and electrons- can interact strongly with each other providing control of the VCSEL laser emission: a picosecond strain pulse injected into the VCSEL excites long-living mechanical resonances therein. As a result, modulation of the lasing intensity at frequencies up to 40 GHz is observed. From these findings prospective applications such as THz laser control and stimulated phonon emission may emerge.
Stimulated optomechanical excitation of surface acoustic waves in a microdevice

Gaurav Bahl,John Zehnpfennig,Matthew Tomes,Tal Carmon

DOI: https://doi.org/10.1038/ncomms1412

2011-09-12

Abstract:Stimulated Brillouin interaction between sound and light, known to be the strongest optical nonlinearity common to all amorphous and crystalline dielectrics, has been widely studied in fibers and bulk materials but rarely in optical microresonators. The possibility of experimentally extending this principle to excite mechanical resonances in photonic microsystems, for sensing and frequency reference applications, has remained largely unexplored. The challenge lies in the fact that microresonators inherently have large free spectral range, while the phase matching considerations for the Brillouin process require optical modes of nearby frequencies but with different wavevectors. We rely on high-order transverse optical modes to relax this limitation. Here we report on the experimental excitation of mechanical resonances ranging from 49 to 1400 MHz by using forward Brillouin scattering. These natural mechanical resonances are excited in ~100 um silica microspheres, and are of a surface-acoustic whispering-gallery type.

Optics,Quantum Physics

Light, Sound and Microwave Induced Modulation in Microcavity Brillouin Laser

Multiphysical sensing of light, sound and microwave in a microcavity Brillouin laser

Theoretical Modelling of Single-Mode Lasing in Microcavity Lasers Via Optical Interference Injection.

A novel-configuration multi-wavelength Brillouin erbium fiber laser and its application in switchable high-frequency microwave generation

Brillouin Optomechanics in Coupled Silicon Microcavities

Self-pulsations in a Microcavity Brillouin Laser.

Laser Optomechanics

Microwave/Millimeter-Wave Generation Using Multi-Wavelength Photonic Crystal Fiber Brillouin Laser

Taming Brillouin Optomechanics Using Supermode Microresonators

Experimental Demonstration of Subnano-Second Wavelength Switching in V-Coupled-Cavity Semiconductor Laser

Novel Semiconductor Lasers and Integrated Photonic Devices

Optical Generation of Microwave/millimeter‐wave Based on Brillouin‐Erbium Fiber Laser

Soliton Microcombs Multiplexing Using Intracavity-Stimulated Brillouin Lasers

Stimulated Forward Brillouin Scattering in Subwavelength Silicon Membranes

Proposal for Brillouin microwave-to-optical conversion on a chip

Electromechanical Brillouin scattering in integrated optomechanical waveguides

Pump-locked microcavity Brillouin laser

Electrically interfaced Brillouin-active waveguide for multi-domain transduction

Controllable Dual-Soliton Microcombs Using Brillouin Excitation

Controlled lasing from active optomechanical resonators

Stimulated optomechanical excitation of surface acoustic waves in a microdevice