Abstract:Abstract Based on the dual equation of Hamilton system and Duhamel's integral, and the orthogonality of the deflection equations, the mechanical model of homogeneous rectangular thin plate rock mass was established. And the results showed that the effective vibration modes of thin plate granite with four sides fixed were the 1 st , 5 th and 6 th orders under uniform dynamic load, and their vibration frequencies were 310rad/s, 975rad/s and 1309rad/s respectively. Under sustained dynamic load, moreover, the change of the vibration state of the 1 st mode was the most sharp, and the positive and negative alternation of its amplitude was the most frequent in the whole period, which had the most obvious effect on the vibration of the thin plate rock mass. Based on the Fourier transform formula, the Fourier series expressions and waveforms of sustained dynamic loads which contained rectangular wave, triangular wave and impact wave were obtained. The vibration characteristics of thin plate rock mass under these three kinds of sustained dynamic loads, the dynamic distribution of deflection, stress and maximum shear stress, as well as the dynamic damage and failure modes were all obtained. The results showed that plate cracks occurred firstly in the middle of the four sides and these cracks would propagate rapidly along the boundary of the thin plate rock mass; and then, plate cracks occurred at the central of the thin plate and the main develop tendency of these cracks was outward along the long central axis, moreover, these cracks also tended to expand outward along the short side central axis. It could be concluded that the initial failure position of the thin plate rock mass could be determined by the 1 st effective mode, and the development direction and trend of the damage could be determined by 5 th and 6 th effective vibration modes; under sustained dynamic load, tensile-shear failure occurred at four sides and shear failure at four corners; The tensile failure occurred in the central area of the thin plate, which developed into a main crack along the central long axis and a secondary crack along the short central axis, forming an " O- 十 " fracture pattern.

Snap-through Response of Thermally Buckled C/SiC Plates Considering Boundary Elasticity and Initial Imperfections under Progressive Wave Loading

Snap-through Boundaries of Metal Plates under Thermo-Acoustic Load Based on Probability Theory

Static and Dynamic Symmetric Snap-Through of Non-Uniform Shallow Arch under a Pair of End Moments Considering Critical Slowing-Down Effect

The influence of geometric imperfections on post-buckling behavior and free vibrations of a fiber-reinforced composite laminated plate under thermal loading

Study of Random Fatigue Behavior of C/SiC Composite Thin-Wall Plates

Buckling and Vibro-Acoustic Response of the Clamped Composite Laminated Plate in Thermal Environment

Symmetric Snap-Through and Equal Potential Energy Load of Non-Uniform Shallow Arch under a Concentrated Load Considering Imperfection Effect

Dynamic Response and Failure Mechanism of Layered Thin Plate Rock Mass Under Sustained Dynamic Load

Experimental and Numerical Investigations on Dynamic and Acoustic Responses of a Thermal Post-Buckled Plate

Experimental Investigation on Interlaminar and In-Plane Shear Damage Evolution of 2D C/SiC Composites Using Acoustic Emission and X-ray Computed Microtomography

Optimizing parameters to achieve giant deformation of an incompressible dielectric elastomeric plate

Nonlinear Low-Velocity Impact Analysis of Matrix Cracked Hybrid Laminated Plates Containing CNTRC Layers Resting on Visco-Pasternak Foundation

Aeroelastic instability of an inverted cantilevered plate with cracks in axial subsonic airflow

Residual Strength Analysis of C/SiC Ceramic Matrix Composite Panels Subjected to Combined Thermal-Acoustic Loadings

Nonlinear dynamic buckling of a simply supported imperfect nanocomposite shear deformable plate under the effect of in-plane velocities

Post-Buckling and Panel Flutter of Pre-Heated Functionally Graded Plates

Thermomechanical analysis of snap-buckling phenomenon in long FG-CNTRC cylindrical panels resting on nonlinear elastic foundation

Postbuckling investigations of piezoelectric microdevices considering damage effects

Nonlinear random responses and fatigue prediction of elastically restrained laminated composite panels in thermo-acoustic environments

Theoretical Analyses of Vibration and Sound Radiation Responses of Heated Symmetric Laminated Plates in Pre- and Post-Buckling Ranges

Effect of Static Load on Vibro-Acoustic Behaviour of Clamped Plates with Geometric Imperfections