Abstract:This paper discusses the design of a 10 kV and 200 A hybrid dc circuit breaker suitable for the protection of the dc power systems in electric ships. The proposed hybrid dc circuit breaker employs a Thompson coil based ultrafast mechanical switch (MS) with the assistance of two additional solid-state power devices. A low- voltage (80 V) metal-oxidesemiconductor field-effect transistors (MOSFETs)-based commutating switch (CS) is series connected with the MS to realize the zero current turn-OFF of the MS. In this way, the arcing issue with the MS is avoided. A 15 kV SiC emitter turn-OFF thyristor-based main breaker (MB) is parallel connected with the MS and CS branch to interrupt the fault current. A stack of MOVs parallel with the MB are used to clamp the voltage across the hybrid dc circuit breaker during interruption. This paper focuses on the electronic parts of the hybrid dc circuit breaker, and a companion paper will elucidate the principle and operation of the fast acting MS and the overall operation of the hybrid dc circuit breaker. The selection and design of both the high-voltage and low- voltage electronic components in the hybrid dc circuit breaker are presented in this paper. The turn-OFF capability of the MB with and without snubber circuit is experimentally tested, validating its suitability for the hybrid dc circuit breaker application. The CSs' conduction performances are tested up to 200 A, and its current commutating during fault current interruption is also analyzed. Finally, the hybrid dc circuit breaker demonstrated a fast current interruption within 2 ms at 7 kV and 100 A.

A 4 Kv/120 A SiC Solid-State DC Circuit Breaker Powered by a Load-Independent IPT System

A Single Gate Driver Based Solid-State Circuit Breaker Using Series Connected SiC MOSFETs

Low Voltage DC Solid-State Circuit Breaker with Soft Turn-off and Self-Charging Operation

A Compact Gate Control and Voltage-Balancing Circuit for Series-Connected SiC MOSFETs and Its Application in a DC Breaker

Solid State DC Circuit Breaker for Super Uninterruptible Power Supply

A Cost-Effective DC Circuit Breaker With Series-Connected Power Devices Using a Single Gate Driver

Design of 400 V Miniature DC Solid State Circuit Breaker with SiC MOSFET

A SiC JFET-Based Solid State Circuit Breaker With Digitally Controlled Current-Time Profiles

A Solid-State Circuit Breaker Based on Si-IGBT and SiC MOSFET Hybrid Switch with Self-delay Gate Driver Circuits

Performance Evaluation of Multiple Si and SiC Solid State Devices for Circuit Breaker Application in 380VDC Delivery System

Design of a Solid State Circuit Breaker Using a SiC MOSFET for LVDC Applications

Design and Test of the Bidirectional Solid-State Switch for an 160kv/9ka Hybrid DC Circuit Breaker

A Novel Solid-State DC-breaker Based on Cascaded SiC MOSFETs

Ultra-Low On-State Voltage IGCT for Solid-State DC Circuit Breaker with Single-Switching Attribute

Design and Analysis of a 375v/5ka Solid State DC Circuit Breaker Based on IGCT

Mitigating Gate Oscillations of Parallel SiC MOSFETs for Enhanced Performance in DC Solid-State Circuit Breaker

A Novel Oscillating-Commutation Solid-State DC Breaker Based on Compound IGCTs

Development of A 10kv Solid-State Dc Circuit Breaker Based on Press-Pack Igbt for Vsc-Hvdc System

High Current Medium Voltage Solid State Circuit Breaker Using Paralleled 15kv SiC ETO

A Medium-Voltage Hybrid DC Circuit Breaker, Part I: Solid-State Main Breaker Based on 15 Kv SiC Emitter Turn-OFF Thyristor

Investigation Of A Novel Igct Module For Dc Circuit Breaker