Abstract:In recent years, there has been a rapid growth in new technologies within nuclear medicine and PET diagnostics, particularly in the field of radiopharmaceutical dose preparation. These advancements are driven by the integration of automatic algorithms into the process. This evolution has brought about significant improvements in the efficiency and accuracy of radiopharmaceutical dose preparation. These automatic algorithms utilize state-of-the-art technologies to streamline the process and ensure precise and tailored doses for patients. The integration of these advanced technologies has revolutionized the field, allowing for more effective and personalized treatment options in nuclear medicine and PET diagnostics. By employing automatic radiopharmaceutical dose dispensers (ARDDs), radiation exposure to technologists is minimized while also mitigating the risk of potential infections for patients. Ionization chambers are currently the most used detectors to measure the activity of radiopharmaceuticals in ARDDs. However, they present certain limitations, including size constraints. This study is part of an international endeavor to develop a new approach for evaluating radiopharmaceutical activity in an ARDD named KAR l 100 . A new approach was used to develop a scintillation detector by linking a PVT detector to a SiPMs array consisting of four elements, each having an active surface of 6 × 6 mm with a bias voltage of 30 V. The detection system's amplified output was then fed to a single-channel analyzer called Enviro, developed by Tema Sinergie S.p.A in Italy. The counts per second (CPS) detected by the detector were studied using WinTAM software allowing for the radionuclide's activity concentration to be read out at run-time. Three widely used medical radioisotopes, 18 F, 11 C and 68 Ga, were used to evaluate the performance of the detector in terms of linearity and repeatability of the measurements. Half-life and linear response were evaluated over a wide range of activities with different decay schemes. Data analysis was conducted, resulting in half-lives of the 18 F, 11 C and 68 Ga radioisotopes of 109.75 ± 0.35, 20.62 ± 0.34 and 67.82 ± 0.25 min, respectively, with calculated deviations of 0.0167%, 1.00% and 0.29% from expected values. The linear response of the detector over the entire range of desired activity concentrations was confirmed after data correction for the detector dead time. Calibration of the detector combined with the dispenser system was carried out in parallel investigations to provide the required device properties for reference applications in nuclear medicine. Furthermore, Monte Carlo simulations using FLUKA code were performed to investigate the contribution of beta particles in addition to gamma radiations to assess the influence of beta particles on the calibration factors. For better accuracy, a shielding was designed to prevent any beta particles from reaching the detector.

A New DCC Software for 4πβ(ls) – Γ Coincidence Counting

Development of a New 4πβ–4πγ Detection System for Absolute Measurement of Radionuclide Activity

4πβ (LS)-γ (HPGe) Digital Coincidence System Based on Synchronous High-Speed Multichannel Data Acquisition

A calibration procedure for beta-gamma coincidence detector-systems using four radioxenon spikes

TDCRPy: A python package for TDCR measurements

Standardization of 18F by Digital beta(LS)-gamma Coincidence Counting

AWCC Simulations Based on Monte Carlo Code RMC

Electron Emission Channeling for lattice location of radioactive isotopes in single crystals: Improvements from a Timepix3 quad detector and new PyFDD data analysis software

A novel method for accurate and real-time quantification of radiopharmaceutical activity in automated dose dispensers

Novel Data Analysis Tool for the Evaluation of Coincidence Doppler Broadening Spectra of the Positron-Electron Annihilation Line

Feasibility study of activity measurement of positron emitters based on gamma-gamma coincident detection by two NaI(Tl) detectors

New method to eliminate single photon in liquid scintillation counting

New liquid scintillation counter development using Silicon Photomultipliers

A C++ program for estimating detector sensitivities to long-lived particles: Displaced Decay Counter

Expanded Applications of Liquid Scintillation Counting and Several Related Issues

An integrated system for measuring 3D dose distributions of carbon-ion pencil beams in regular QA practice

Influences of Anticoincidence Shield on Liquid Scintillation Count Rates for Various Kinds of Radionuclides

Measurement of Therapeutic12c Beam in a Water Phantom Using CR-39.

Modified 2-Window Approach for Rapid Determination of 90sr and 90Y at Low Quench Level Using Liquid Scintillation Counting

Study of time resolution by digital methods with DRS4 system