Abstract:Patients with stroke and other neurological disorders like trauma, multiple sclerosis (MS) experience different lower limb disabilities due to various damages in neuromuscular system. Orthotic devices are prescribed to compensate muscle weakness, prevent unwanted movement of the impaired limb. Design and manufacturing methods of lower limb orthoses involve manual techniques e.g. casting and moulding of the limbs to be treated, vacuum forming etc. Such methods are time consuming, require skilful labour and often based on trial and error rather than systematic engineering and evidence based principles. In recent years, 3D scanning and reconstruction of medical images facilitate making 3D computer models of lower limb, which allows computer aided design (CAD) tools to be incorporated in orthotic design. All these approaches rely on the external model of lower limb and limited to single piece plastic ankle foot orthosis (AFO) only. To design orthosis with articulated joint, precise alignment of anatomical joint and mechanical axis is necessary. However, it is difficult to infer joint axes from external models as it is partially specified by skeletal structure. In our research, a design approach for custom knee ankle foot orthosis and ankle foot orthosis with commercially available joints has been demonstrated, which involves skeletal structure of lower limb for locating anatomical axes to ensure accurate alignment of orthotic mechanical joint. CAD models of the orthotic components were developed based on the 3D models of a healthy subject’s lower limb, which were developed through 3D reconstruction. Components of the orthotics were fabricated by rapid prototyping and machining to demonstrate the new approach. The fabricated orthoses were evaluated by a certified orthotist and the performance of the custom made AFO was compared statistically with a pre-fabricated AFO with similar ankle joint. The manufacturing process requires approximately 50% lesser time to develop AFO and 70% lesser time to develop KAFO compared to Brace and Limb laboratory of University Malaya. Unlike traditional approaches, the design technique facilitates exact positioning of articulated joint. The developed orthoses are light in weight, comfortable and easy to don and doff. Biomechanical test implies that the fabricated AFO provides better range of motion than a pre-fabricated AFO with same ankle joint. Although the custom AFO allowed significantly higher plantar flexion during pre-swing compared to pre-fabricated AFO condition (MD = 1.734, MSD = 1.55), the subject’s ankle required to generate significantly higher power with the pre-fabricated AFO (MD = 0.141, MSD = 0.035). These findings suggest that the subject had to overcome higher resistance with pre-fabricated AFO compared to custom made AFO. Simultaneous viewing of exterior and skeletal geometry might help the clinicians modify the design to enhance performance of the orthotic device.

A reasonable approach to determine structural dimension of FDM fabricated orthopedic orthosis using finite element simulation and simple additive weighting method

Process Planning for the Fuse Deposition Modeling of Ankle-Foot-Othoses

Multidisciplinary topology and material optimization approach for developing patient-specific limb orthosis using 3D printing

Customized Design for Ergonomic Products Via Additive Manufacturing Considering Joint Biomechanics

Computer integrated design and manufacturing of patient specific lower limb orthoses through 3D reconstruction / Morshed Alam

Design and development of customized elbow orthosis using additive manufacturing

Numerical simulation and experimental testing for static failure prediction in additively manufactured below-knee prosthetic sockets

Deformation analysis of 3d printed metacarpophalangeal and interphalangeal joints via transfer learning

Predicting Mechanical Properties of Polymer Materials Using Rate-Dependent Material Models: Finite Element Analysis of Bespoke Upper Limb Orthoses

A Data-Driven Design Framework for Structural Optimization to Enhance Wearing Adaptability of Prosthetic Hands

Design of an Orthopedic Product by Using Additive Manufacturing Technology: The Arm Splint

COMPUTER AIDED DESIGN AND FABRICATION OF A CUSTOM ARTICULATED ANKLE FOOT ORTHOSIS

The design and manufacturing of a Patient-Specific wrist splint for rehabilitation of rheumatoid arthritis

Application of multi-criteria decision-making methods in the selection of additive manufacturing materials for solid ankle foot orthoses

Additive Manufacturing Of Biomechanically Tailored Meshes For Compliant Wearable And Implantable Devices

Empowering Rehabilitation: Design and Structural Analysis of a Low-Cost 3D-Printed Smart Orthosis

Designing a 3D-printed medical implant with mechanically macrostructural topology and microbionic lattices: A novel wedge-shaped spacer for high tibial osteotomy and biomechanical study

Influence of build orientation and support structure on additive manufacturing of human knee replacements: a computational study

Design of Personalized Cervical Fixation Orthosis Based on 3D Printing Technology

Lightweight Splint Design for Individualized Treatment of Distal Radius Fracture

Lightweight design of Knee-Ankle-Foot Orthotic Devices using Voronoi patterns for Additive Manufacturing