Abstract:Solid-state compact Marx generator using saturable pulse transformer (SPT) and fast recovery diodes has been proposed. The primary circuit is switched by three MOSFETs connected in parallel. The SPT functions as a step-up transformer to increase the voltage amplitude and as a closing switch for the secondary circuit. Meanwhile, all the SPTs share the same magnetic core to achieve a compact structure and ensure good synchronization. The energy storage capacitors on the secondary sides are charged through the unsaturated SPT. When the SPT saturates, the capacitors firstly transfer a little energy to the saturated inductors through the diodes reversely during their reverse recovery process. Currents rise quickly in these inductors until diodes totally recover to reverse blocking state. Then capacitors discharge in series to the load and high-voltage pulses are generated over the load. With the currents in the saturated inductors, the front edges of pulses are no longer affected by them but are dominated the turn-off speed of the diodes, which makes high-voltage and high-current pulses with short front edges possible. The regular and cheap fast recovery diodes in the generator act as semiconductor opening switch to sharpen the pulse front edges. Experiments were carried out with a 4-stage Marx generator prototype, 10.8-kV high-voltage pulses with a front edge of 11 ns, a pulse width of 190 ns, were obtained over a 100-Ω resistive load. The total energy efficiency is 49.8%. The proposed Marx generator using regular fast recovery diodes is compact, cheap, and efficient to generate high-voltage pulses with short front edges.

A Marx High-Voltage Pulse Source Based on the Series–Parallel Connections of Avalanche Transistors

Development of a High Peak Voltage Picoseconds Avalanche Transistor Based Marx Bank Circuit

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

Improved Marx Pulse Generator With Auxiliary Trigger Topology (2022)

Influence of Avalanche Transistor Switching Mode on Waveform Characteristics of Solid-State Pulse Source.

Design and Simulation of a Compact Sub-Nanosecond Pulse Generator Based on Marx's Circuit Theory of Field-Effect Transistors

All Solid-State Marx Modulator with Bipolar High-Voltage Fast Narrow Pulses Output

Novel Multiple-switch Pulsed Power Technologies

Investigation on a Novel Multiple-Switch Pulsed Power Technology

High-voltage pulse waveform modulator based on solid-state Marx generator

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Bipolar high voltage pulse generator without H-bridge based on cascade of positive and negative Marx generators

An All Solid-State High-Voltage Rectangular Pulse Generator

A Novel Boost Marx Pulse Generator Based on Single-Driver Series-Connected SiC MOSFETs

Design of Q-switching High Voltage Pulse Generators with Nanosecond Rise Time

Solid-state Marx generator based on saturable pulse transformer and fast recovery diodes

An All Solid-State Pulsed Power Generator Based on Marx Generator

Repetitive and High Voltage Marx Generator Using Solid-State Devices

The Cascade of High-Voltage Pulsed Current Sources

Experimental analysis of wide-spectrum oscillator with nonmatched transmission line